linux-kernel - Re: USB PD TYPEC - FUSB302B port controller hard reset issue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZZPbeUbMM3J4pH/K@kuha.fi.intel.com>
Date: Tue, 2 Jan 2024 11:46:34 +0200
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Suniel Mahesh <sunil@...rulasolutions.com>
Cc: Guenter Roeck <linux@...ck-us.net>, Kyle Tso <kyletso@...gle.com>,
	Jagan Teki <jagan@...rulasolutions.com>,
	USB list <linux-usb@...r.kernel.org>, linux-kernel@...r.kernel.org
Subject: Re: USB PD TYPEC - FUSB302B port controller hard reset issue

Hi Suniel,

On Tue, Dec 26, 2023 at 04:14:48PM +0530, Suniel Mahesh wrote:
> Hi Guenter Roeck / Heikki Krogerus and all,
> 
> 1.
> I am testing USB TYPEC PD on a Rockchip Rk3399 SOC based target which has a
> FUSB302B TYPEC port controller.
> 
> 2.
> My source is a wall charger which is based on Gallium Nitride (GaN II)
> technology and has four ports as follows:
> 
> USB-C1: 100W PD3.0, 5V/3A, 9V/3A, 12V/3A, 15V/3A. 20V/5A. PPS: 3.3V-11V/4A
> USB-C2: 100W PD3.0. 5V/3A. 9V/3A. 12V/3A, 15V/3A. 20V/5A PPS:3.3-11V/4A
> USB-C3: 20W PD3.0, 5V/3A, 9V/2.22A, 12V/1.67A
> USB-A: 18W QC3.0. 5V/3A, 9V/2A, 12V/1.5A
> 
> 3.
> i am using latest linux-next and enabled all the relevant configs,
> especially:
> CONFIG_TYPEC=y
> CONFIG_TYPEC_TCPM=y
> CONFIG_TYPEC_FUSB302=y

Which kernel version?

> 4.
> DT node is as follows when i use USB-C1 of wall charger:
> 
>  connector {
>                         compatible = "usb-c-connector";
>                         label = "USB-C";
>                         data-role = "dual";
>                         power-role = "sink";
>                         try-power-role = "sink";
>                         op-sink-microwatt = <1000000>;
>                         sink-pdos = <PDO_FIXED(5000, 3000,
> PDO_FIXED_USB_COMM)
>                                     PDO_FIXED(12000, 3000,
> PDO_FIXED_USB_COMM)>;
>                 };

What do you mean by "when i use USB-C1..."? Why is the above valid
only then and not with the other PD contracts?

> Issue:
> The board power well most of the time, but may be in 1 out of 5 cold boots,
> FUSB302B is getting a hard reset, as
> FUSB302B INTERRUPTA register bit I_HARDRST is getting set.
> 
> After some digging, found out that the above behaviour is accounted to when
> something is wrong with the CRC of
> the received packet (SOP - Start of Packet)

How did you determine that the problem is a bad CRC?

> This behaviour is seen i.e. FUSB302B getting a hard reset more on the
> USB-C3 port.
> 
> Any pointers on how to solve this issue.

Guenter, do you have time to take a look at this?

thanks,

-- 
heikki