linux-kernel - [PATCH] tty: serial: 8250: Set RS232 as default for Moxa PCIe board initialization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20240102053133.9795-1-crescentcy.hsieh@moxa.com>
Date: Tue,  2 Jan 2024 13:31:33 +0800
From: Crescent CY Hsieh <crescentcy.hsieh@...a.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jirislaby@...nel.org>
Cc: linux-kernel@...r.kernel.org,
	linux-serial@...r.kernel.org,
	Crescent CY Hsieh <crescentcy.hsieh@...a.com>
Subject: [PATCH] tty: serial: 8250: Set RS232 as default for Moxa PCIe board initialization

After switching the serial interface of the Moxa RS232 PCIe boards, it
fails to reset to RS232 when attempting to reload 8250_pci driver.

This patch set RS232 as the default setting during the initialization of
Moxa PCIe board.

Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@...a.com>
---
 drivers/tty/serial/8250/8250_pci.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 8ccf691935b7..0d35c77fad9e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2039,12 +2039,13 @@ static int pci_moxa_init(struct pci_dev *dev)
 	unsigned short device = dev->device;
 	resource_size_t iobar_addr = pci_resource_start(dev, 2);
 	unsigned int num_ports = (device & 0x00F0) >> 4, i;
-	u8 val;
+	u8 val, init_mode = MOXA_RS232;
 
 	if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) {
-		for (i = 0; i < num_ports; ++i)
-			pci_moxa_set_interface(dev, i, MOXA_RS422);
+		init_mode = MOXA_RS422;
 	}
+	for (i = 0; i < num_ports; ++i)
+		pci_moxa_set_interface(dev, i, init_mode);
 
 	/*
 	 * Enable hardware buffer to prevent break signal output when system boots up.
-- 
2.34.1