[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240103061818.564-1-l.sanfilippo@kunbus.com>
Date: Wed, 3 Jan 2024 07:18:11 +0100
From: Lino Sanfilippo <l.sanfilippo@...bus.com>
To: gregkh@...uxfoundation.org,
jirislaby@...nel.org,
ilpo.jarvinen@...ux.intel.com
Cc: u.kleine-koenig@...gutronix.de,
shawnguo@...nel.org,
s.hauer@...gutronix.de,
mcoquelin.stm32@...il.com,
alexandre.torgue@...s.st.com,
cniedermaier@...electronics.com,
hugo@...ovil.com,
m.brock@...mierlo.com,
linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org,
LinoSanfilippo@....de,
lukas@...ner.de,
p.rosenberger@...bus.com,
Lino Sanfilippo <l.sanfilippo@...bus.com>
Subject: [PATCH v7 0/7] Fixes and improvements for RS485
The following series includes some fixes and improvements around RS485 in
the serial core and UART drivers:
Patch 1: Do not hold the port lock when setting rx-during-tx GPIO
Patch 2: set missing supported flag for RX during TX GPIO
Patch 3: fix sanitizing check for RTS settings
Patch 4: make sure RS485 is cannot be enabled when it is not supported
Patch 5: imx: do not set RS485 enabled if it is not supported
Patch 6: omap: do not override settings for rs485 support
Patch 7: exar: set missing RS485 supported flag
Changes in v7:
- fix errorneous condition in stm32 driver for setting the
SER_RS485_RX_DURING_TX flag (pointed out by Maarten)
- fix compilation issue spotted by kernel test robot
Changes in v6:
- restore RS485 GPIO settings if setting rs485 configuration fails
(pointed out by Ilpo)
- drop change for uart_get_rs485_config()
- rephrase and correct commit messages (pointed out by Ilpo)
- remove unnecessary structure nullification (suggested by Ilpo)
- move all RS485 tasks into one function (suggested by Ilpo)
Changes in v5:
- do not combine the functions that set the RS484 GPIOs (as Hugo originally
suggested)
Changes in v4:
- add comment for function uart_set_rs485_gpios after hint from Hugo
- correct commit message as pointed out by Hugo
- rephrase commit messages
- add patch 7 after discussion with Ilpo
Changes in v3
- Drop patch "Get rid of useless wrapper pl011_get_rs485_mode()" as
requested by Greg
Changes in v2:
- add missing 'Fixes' tags as requested by Greg
- corrected a typo as pointed out by Hugo
- fix issue in imx driver in the serial core as suggested by Uwe
- partly rephrase some commit messages
- add patch 7
Lino Sanfilippo (7):
serial: Do not hold the port lock when setting rx-during-tx GPIO
serial: core: set missing supported flag for RX during TX GPIO
serial: core: fix sanitizing check for RTS settings
serial: core: make sure RS485 cannot be enabled when it is not
supported
serial: core, imx: do not set RS485 enabled if it is not supported
serial: omap: do not override settings for RS485 support
serial: 8250_exar: Set missing rs485_supported flag
drivers/tty/serial/8250/8250_exar.c | 5 ++-
drivers/tty/serial/imx.c | 11 ------
drivers/tty/serial/omap-serial.c | 27 +++++++------
drivers/tty/serial/serial_core.c | 61 +++++++++++++++++++++++------
drivers/tty/serial/stm32-usart.c | 8 +---
5 files changed, 67 insertions(+), 45 deletions(-)
base-commit: 610a9b8f49fbcf1100716370d3b5f6f884a2835a
--
2.43.0
Powered by blists - more mailing lists