| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <77b041326bf1eaa9dd0969df31ee2e168967c1cb.1704305544.git.jan.kiszka@siemens.com>
Date: Wed, 3 Jan 2024 19:12:22 +0100
From: Jan Kiszka <jan.kiszka@...mens.com>
To: Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Bao Cheng Su <baocheng.su@...mens.com>
Subject: [PATCH v2 5/7] arm64: dts: ti: iot2050: Factor out DP related bits
From: Jan Kiszka <jan.kiszka@...mens.com>
There is a variant coming which does not support the Display Port. Move
all related bits into a separate dtsi so that only those variants
supporting the interface can include it.
Along that, remove a redundant clock setting from
k3-am65-iot2050-common-pg1.dtsi.
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
---
.../dts/ti/k3-am65-iot2050-common-pg1.dtsi | 5 +-
.../boot/dts/ti/k3-am65-iot2050-common.dtsi | 85 ----------------
.../arm64/boot/dts/ti/k3-am65-iot2050-dp.dtsi | 98 +++++++++++++++++++
.../dts/ti/k3-am6528-iot2050-basic-pg2.dts | 1 +
.../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 1 +
.../dts/ti/k3-am6548-iot2050-advanced-pg2.dts | 1 +
6 files changed, 102 insertions(+), 89 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-dp.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
index 1d1979859583..3f09d49d7dff 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -8,10 +8,7 @@
* Common bits of the IOT2050 Basic and Advanced variants, PG1
*/
-&dss {
- assigned-clocks = <&k3_clks 67 2>;
- assigned-clock-parents = <&k3_clks 67 5>;
-};
+#include "k3-am65-iot2050-dp.dtsi"
&serdes0 {
status = "disabled";
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 402afa4bc1b6..3ecdd63760e5 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -313,45 +313,6 @@ AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
>;
};
- dss_vout1_pins_default: dss-vout1-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */
- AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */
- AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */
- AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */
- AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */
- AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */
- AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */
- AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */
- AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */
- AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */
- AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */
- AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */
- AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */
- AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */
- AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */
- AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */
- AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */
- AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */
- AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */
- AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */
- AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */
- AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */
- AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */
- AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */
- AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */
- AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */
- AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */
- AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */
- >;
- };
-
- dp_pins_default: dp-default-pins {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */
- >;
- };
-
main_i2c2_pins_default: main-i2c2-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */
@@ -488,32 +449,6 @@ &main_i2c3 {
#address-cells = <1>;
#size-cells = <0>;
-
- edp-bridge@f {
- compatible = "toshiba,tc358767";
- reg = <0x0f>;
- pinctrl-names = "default";
- pinctrl-0 = <&dp_pins_default>;
- reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
-
- clock-names = "ref";
- clocks = <&dp_refclk>;
-
- toshiba,hpd-pin = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- bridge_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
- };
- };
};
&mcu_cpsw {
@@ -611,26 +546,6 @@ seboot-backup@...000 {
};
};
-&dss {
- pinctrl-names = "default";
- pinctrl-0 = <&dss_vout1_pins_default>;
-
- assigned-clocks = <&k3_clks 67 2>;
- assigned-clock-parents = <&k3_clks 67 5>;
-};
-
-&dss_ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@1 {
- reg = <1>;
-
- dpi_out: endpoint {
- remote-endpoint = <&bridge_in>;
- };
- };
-};
-
&pcie1_rc {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-dp.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-dp.dtsi
new file mode 100644
index 000000000000..07a0ea872f5b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-dp.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2024
+ *
+ * Authors:
+ * Jan Kiszka <jan.kiszka@...mens.com>
+ *
+ * Common bits for IOT2050 variants with Display Port
+ */
+
+&main_pmx0 {
+ dss_vout1_pins_default: dss-vout1-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */
+ AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */
+ AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */
+ AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */
+ AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */
+ AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */
+ AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */
+ AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */
+ AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */
+ AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */
+ AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */
+ AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */
+ AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */
+ AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */
+ AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */
+ AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */
+ AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */
+ AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */
+ AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */
+ AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */
+ AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */
+ AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */
+ AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */
+ AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */
+ AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */
+ AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */
+ AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */
+ AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */
+ >;
+ };
+
+ dp_pins_default: dp-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */
+ >;
+ };
+};
+
+&main_i2c3 {
+ edp-bridge@f {
+ compatible = "toshiba,tc358767";
+ reg = <0x0f>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_pins_default>;
+ reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+ clock-names = "ref";
+ clocks = <&dp_refclk>;
+
+ toshiba,hpd-pin = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_vout1_pins_default>;
+
+ assigned-clocks = <&k3_clks 67 2>;
+ assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
index 8be3370d3de1..cba0c3d46263 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
@@ -17,6 +17,7 @@
#include "k3-am6528-iot2050-basic-common.dtsi"
#include "k3-am65-iot2050-common-pg2.dtsi"
+#include "k3-am65-iot2050-dp.dtsi"
#include "k3-am65-iot2050-usb3.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 38623501a14f..484a31a64cff 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -16,6 +16,7 @@
#include "k3-am6548-iot2050-advanced-common.dtsi"
#include "k3-am65-iot2050-common-pg2.dtsi"
#include "k3-am65-iot2050-arduino-connector.dtsi"
+#include "k3-am65-iot2050-dp.dtsi"
/ {
compatible = "siemens,iot2050-advanced-m2", "ti,am654";
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
index b6e878a31c27..9e1ebfea3f8f 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -18,6 +18,7 @@
#include "k3-am6548-iot2050-advanced-common.dtsi"
#include "k3-am65-iot2050-common-pg2.dtsi"
#include "k3-am65-iot2050-arduino-connector.dtsi"
+#include "k3-am65-iot2050-dp.dtsi"
#include "k3-am65-iot2050-usb3.dtsi"
/ {
--
2.35.3
Powered by blists - more mailing lists