Message-ID: <8eecede9-23b6-48dd-90e2-68e1f2722830@intel.com>
Date: Wed, 3 Jan 2024 20:52:50 +0200
From: Adrian Hunter <adrian.hunter@...el.com>
To: Sergey Khimich <serghox@...il.com>, linux-mmc@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Ulf Hansson <ulf.hansson@...aro.org>,
 Shawn Lin <shawn.lin@...k-chips.com>, Jyan Chou <jyanchou@...ltek.com>
Subject: Re: [PATCH v5 2/2] mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support

On 31/12/23 16:46, Sergey Khimich wrote:
> From: Sergey Khimich <serghox@...il.com>
> 
> For enabling CQE support just set 'supports-cqe' in your DevTree file
> for appropriate mmc node.
> 
> Signed-off-by: Sergey Khimich <serghox@...il.com>
> ---
>  drivers/mmc/host/Kconfig            |   1 +
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 181 +++++++++++++++++++++++++++-
>  2 files changed, 180 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 58bd5fe4cd25..f7594705b013 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -233,6 +233,7 @@ config MMC_SDHCI_OF_DWCMSHC
>  	depends on MMC_SDHCI_PLTFM
>  	depends on OF
>  	depends on COMMON_CLK
> +	select MMC_CQHCI
>  	help
>  	  This selects Synopsys DesignWare Cores Mobile Storage Controller
>  	  support.
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index 3a3bae6948a8..0ba1df4bcf36 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -20,6 +20,7 @@
>  #include <linux/sizes.h>
>  
>  #include "sdhci-pltfm.h"
> +#include "cqhci.h"
>  
>  #define SDHCI_DWCMSHC_ARG2_STUFF	GENMASK(31, 16)
>  
> @@ -36,6 +37,9 @@
>  #define DWCMSHC_ENHANCED_STROBE		BIT(8)
>  #define DWCMSHC_EMMC_ATCTRL		0x40
>  
> +/* DWC IP vendor area 2 pointer */
> +#define DWCMSHC_P_VENDOR_AREA2		0xea
> +
>  /* Rockchip specific Registers */
>  #define DWCMSHC_EMMC_DLL_CTRL		0x800
>  #define DWCMSHC_EMMC_DLL_RXCLK		0x804
> @@ -75,6 +79,11 @@
>  #define BOUNDARY_OK(addr, len) \
>  	((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
>  
> +#define DWCMSHC_SDHCI_CQE_TRNS_MODE	(SDHCI_TRNS_MULTI | \
> +					 SDHCI_TRNS_BLK_CNT_EN | \
> +					 SDHCI_TRNS_DMA)
> +
> +
>  enum dwcmshc_rk_type {
>  	DWCMSHC_RK3568,
>  	DWCMSHC_RK3588,
> @@ -90,7 +99,9 @@ struct rk35xx_priv {
>  
>  struct dwcmshc_priv {
>  	struct clk	*bus_clk;
> -	int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */
> +	int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA1 reg */
> +	int vendor_specific_area2; /* P_VENDOR_SPECIFIC_AREA2 reg */
> +
>  	void *priv; /* pointer to SoC private stuff */
>  };
>  
> @@ -210,6 +221,90 @@ static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc,
>  	sdhci_writel(host, vendor, reg);
>  }
>  
> +static int dwcmshc_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> +	int err = sdhci_execute_tuning(mmc, opcode);
> +	struct sdhci_host *host = mmc_priv(mmc);
> +
> +	if (err)
> +		return err;
> +
> +	/*
> +	 * Tuning can leave the IP in an active state (Buffer Read Enable bit
> +	 * set) which prevents the entry to low power states (i.e. S0i3). Data
> +	 * reset will clear it.
> +	 */
> +	sdhci_reset(host, SDHCI_RESET_DATA);
> +
> +	return 0;
> +}
> +
> +static u32 dwcmshc_cqe_irq_handler(struct sdhci_host *host, u32 intmask)
> +{
> +	int cmd_error = 0;
> +	int data_error = 0;
> +
> +	if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
> +		return intmask;
> +
> +	cqhci_irq(host->mmc, intmask, cmd_error, data_error);
> +
> +	return 0;
> +}
> +
> +static void dwcmshc_sdhci_cqe_enable(struct mmc_host *mmc)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	u8 ctrl;
> +
> +	sdhci_writew(host, DWCMSHC_SDHCI_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
> +
> +	sdhci_cqe_enable(mmc);
> +
> +	/*
> +	 * The "DesignWare Cores Mobile Storage Host Controller
> +	 * DWC_mshc / DWC_mshc_lite Databook" says:
> +	 * when Host Version 4 Enable" is 1 in Host Control 2 register,
> +	 * SDHCI_CTRL_ADMA32 bit means ADMA2 is selected.
> +	 * Selection of 32-bit/64-bit System Addressing:
> +	 * either 32-bit or 64-bit system addressing is selected by
> +	 * 64-bit Addressing bit in Host Control 2 register.
> +	 *
> +	 * On the other hand the "DesignWare Cores Mobile Storage Host
> +	 * Controller DWC_mshc / DWC_mshc_lite User Guide" says, that we have to
> +	 * set DMA_SEL to ADMA2 _only_ mode in the Host Control 2 register.
> +	 */
> +	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> +	ctrl &= ~SDHCI_CTRL_DMA_MASK;
> +	ctrl |= SDHCI_CTRL_ADMA32;
> +	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +}
> +
> +static void dwcmshc_set_tran_desc(struct cqhci_host *cq_host, u8 **desc,
> +				  dma_addr_t addr, int len, bool end, bool dma64)
> +{
> +	int tmplen, offset;
> +
> +	if (likely(!len || BOUNDARY_OK(addr, len))) {
> +		cqhci_set_tran_desc(*desc, addr, len, end, dma64);
> +		return;
> +	}
> +
> +	offset = addr & (SZ_128M - 1);
> +	tmplen = SZ_128M - offset;
> +	cqhci_set_tran_desc(*desc, addr, tmplen, false, dma64);
> +
> +	addr += tmplen;
> +	len -= tmplen;
> +	*desc += cq_host->trans_desc_len;
> +	cqhci_set_tran_desc(*desc, addr, len, end, dma64);
> +}
> +
> +static void dwcmshc_cqhci_dumpregs(struct mmc_host *mmc)
> +{
> +	sdhci_dumpregs(mmc_priv(mmc));
> +}
> +
>  static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock)
>  {
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -345,6 +440,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
>  	.get_max_clock		= dwcmshc_get_max_clock,
>  	.reset			= sdhci_reset,
>  	.adma_write_desc	= dwcmshc_adma_write_desc,
> +	.irq			= dwcmshc_cqe_irq_handler,
>  };
>  
>  static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
> @@ -379,6 +475,71 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_rk35xx_pdata = {
>  		   SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
>  };
>  
> +static const struct cqhci_host_ops dwcmshc_cqhci_ops = {
> +	.enable		= dwcmshc_sdhci_cqe_enable,
> +	.disable	= sdhci_cqe_disable,
> +	.dumpregs	= dwcmshc_cqhci_dumpregs,
> +	.set_tran_desc	= dwcmshc_set_tran_desc,
> +};
> +
> +static void dwcmshc_cqhci_init(struct sdhci_host *host, struct platform_device *pdev)
> +{
> +	struct cqhci_host *cq_host;
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +	bool dma64 = false;
> +	u16 clk;
> +	int err;
> +
> +	host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> +	cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL);
> +	if (!cq_host) {
> +		dev_err(mmc_dev(host->mmc), "Unable to setup CQE: not enough memory\n");
> +		return;
> +	}
> +
> +	/*
> +	 * For dwcmshc host controller we have to enable internal clock
> +	 * before access to some registers from Vendor Specific Aria 2.

Aria -> Area

> +	 */
> +	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +	clk |= SDHCI_CLOCK_INT_EN;
> +	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +	if (!(clk & SDHCI_CLOCK_INT_EN)) {
> +		dev_err(mmc_dev(host->mmc), "Unable to setup CQE: internal clock enable error\n");
> +		goto free_cq_host;
> +	}
> +
> +	cq_host->mmio = host->ioaddr + priv->vendor_specific_area2;
> +	cq_host->ops = &dwcmshc_cqhci_ops;
> +
> +	/* Enable using of 128-bit task descriptors */
> +	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
> +	if (dma64) {
> +		dev_dbg(mmc_dev(host->mmc), "128-bit task descriptors\n");
> +		cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> +	}
> +	err = cqhci_init(cq_host, host->mmc, dma64);
> +	if (err) {
> +		dev_err(mmc_dev(host->mmc), "Unable to setup CQE: error %d\n", err);
> +		goto int_clock_disable;
> +	}
> +
> +	dev_dbg(mmc_dev(host->mmc), "CQE init done\n");
> +
> +	return;
> +
> +int_clock_disable:
> +	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +	clk &= ~SDHCI_CLOCK_INT_EN;
> +	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +free_cq_host:
> +	devm_kfree(&pdev->dev, cq_host);
> +}
> +
> +
>  static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
>  {
>  	int err;
> @@ -471,7 +632,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
>  	struct rk35xx_priv *rk_priv = NULL;
>  	const struct sdhci_pltfm_data *pltfm_data;
>  	int err;
> -	u32 extra;
> +	u32 extra, caps;
>  
>  	pltfm_data = device_get_match_data(&pdev->dev);
>  	if (!pltfm_data) {
> @@ -519,9 +680,12 @@ static int dwcmshc_probe(struct platform_device *pdev)
>  
>  	priv->vendor_specific_area1 =
>  		sdhci_readl(host, DWCMSHC_P_VENDOR_AREA1) & DWCMSHC_AREA1_MASK;
> +	priv->vendor_specific_area2 =
> +		sdhci_readw(host, DWCMSHC_P_VENDOR_AREA2);

Is this OK for all IPs? ie. do they all have DWCMSHC_P_VENDOR_AREA2 register?

>  
>  	host->mmc_host_ops.request = dwcmshc_request;
>  	host->mmc_host_ops.hs400_enhanced_strobe = dwcmshc_hs400_enhanced_strobe;
> +	host->mmc_host_ops.execute_tuning = dwcmshc_execute_tuning;
>  
>  	if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) {
>  		rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
> @@ -547,6 +711,10 @@ static int dwcmshc_probe(struct platform_device *pdev)
>  		sdhci_enable_v4_mode(host);
>  #endif
>  
> +	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> +	if (caps & SDHCI_CAN_64BIT_V4)
> +		sdhci_enable_v4_mode(host);
> +
>  	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
>  
>  	pm_runtime_get_noresume(dev);
> @@ -557,6 +725,15 @@ static int dwcmshc_probe(struct platform_device *pdev)
>  	if (err)
>  		goto err_rpm;
>  
> +	/* Setup Command Queue Engine if enabled */
> +	if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
> +		if (caps & SDHCI_CAN_64BIT_V4)
> +			dwcmshc_cqhci_init(host, pdev);
> +		else
> +			dev_warn(dev, "Cannot enable CQE without V4 mode support\n");
> +	}
> +
> +

Double blank line.

>  	if (rk_priv)
>  		dwcmshc_rk35xx_postinit(host, priv);
>  

Powered by blists - more mailing lists