[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240104213044.4653-5-ansuelsmth@gmail.com>
Date: Thu, 4 Jan 2024 22:30:41 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Christian Marangi <ansuelsmth@...il.com>
Subject: [net-next PATCH v4 4/4] net: phy: at803x: make read_status more generic
Make read_status more generic in preparation on moving it to shared
library as other PHY Family Driver will have the exact same
implementation.
The only specific part was a check for AR8031/33 if 1000basex was used.
The check is moved to a dedicated function specific for those PHYs.
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
drivers/net/phy/at803x.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index b44b91c58696..2f50170738f3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1020,13 +1020,9 @@ static int at803x_read_specific_status(struct phy_device *phydev,
static int at803x_read_status(struct phy_device *phydev)
{
- struct at803x_priv *priv = phydev->priv;
struct at803x_ss_mask ss_mask = { 0 };
int err, old_link = phydev->link;
- if (priv->is_1000basex)
- return genphy_c37_read_status(phydev);
-
/* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
if (err)
@@ -1620,6 +1616,17 @@ static int at8031_config_intr(struct phy_device *phydev)
return at803x_config_intr(phydev);
}
+/* AR8031 and AR8033 share the same read status logic */
+static int at8031_read_status(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ if (priv->is_1000basex)
+ return genphy_c37_read_status(phydev);
+
+ return at803x_read_status(phydev);
+}
+
/* AR8031 and AR8035 share the same cable test get status reg */
static int at8031_cable_test_get_status(struct phy_device *phydev,
bool *finished)
@@ -2283,7 +2290,7 @@ static struct phy_driver at803x_driver[] = {
.read_page = at803x_read_page,
.write_page = at803x_write_page,
.get_features = at803x_get_features,
- .read_status = at803x_read_status,
+ .read_status = at8031_read_status,
.config_intr = at8031_config_intr,
.handle_interrupt = at803x_handle_interrupt,
.get_tunable = at803x_get_tunable,
--
2.43.0
Powered by blists - more mailing lists