[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240104-ltk-dev_err_probe-v1-2-8ef3c0b585d8@theobroma-systems.com>
Date: Thu, 4 Jan 2024 13:41:58 +0100
From: Quentin Schulz <foss+kernel@...il.net>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Sam Ravnborg <sam@...nborg.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>
Cc: Quentin Schulz <foss+kernel@...il.net>,
Heiko Stuebner <heiko@...ech.de>,
dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org,
Quentin Schulz <quentin.schulz@...obroma-systems.com>
Subject: [PATCH 2/2] drm/panel: ltk050h3146w: use dev_err_probe wherever possible
From: Quentin Schulz <quentin.schulz@...obroma-systems.com>
This is only a cosmetic change.
This replaces a hand-crafted EPROBE_DEFER handling for deciding to print
an error message with dev_err_probe.
A side-effect is that dev_err_probe also adds a debug message when it's
not EPROBE_DEFER, but this is seen as an improvement.
Cc: Quentin Schulz <foss+kernel@...il.net>
Signed-off-by: Quentin Schulz <quentin.schulz@...obroma-systems.com>
---
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
index ecfa4181c4fd9..9d87cc1a357e3 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
@@ -650,20 +650,13 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "cannot get reset gpio\n");
ctx->vci = devm_regulator_get(dev, "vci");
- if (IS_ERR(ctx->vci)) {
- ret = PTR_ERR(ctx->vci);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to request vci regulator: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ctx->vci))
+ return dev_err_probe(dev, PTR_ERR(ctx->vci), "Failed to request vci regulator\n");
ctx->iovcc = devm_regulator_get(dev, "iovcc");
- if (IS_ERR(ctx->iovcc)) {
- ret = PTR_ERR(ctx->iovcc);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ctx->iovcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+ "Failed to request iovcc regulator\n");
mipi_dsi_set_drvdata(dsi, ctx);
--
2.43.0
Powered by blists - more mailing lists