Message-Id: <20240104130129.17823-4-Harald.Mommer@opensynergy.com>
Date: Thu,  4 Jan 2024 14:01:29 +0100
From: Harald Mommer <Harald.Mommer@...nsynergy.com>
To: virtio-dev@...ts.oasis-open.org,
	Haixu Cui <quic_haixcui@...cinc.com>,
	Mark Brown <broonie@...nel.org>,
	Viresh Kumar <viresh.kumar@...aro.org>,
	linux-spi@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: quic_ztu@...cinc.com,
	Matti Moell <Matti.Moell@...nsynergy.com>,
	Mikhail Golubev <Mikhail.Golubev@...nsynergy.com>,
	Harald Mommer <harald.mommer@...nsynergy.com>,
	Harald Mommer <Harald.Mommer@...nsynergy.com>
Subject: [RFC PATCH v2 3/3] SPI: Add virtio SPI driver (V10 draft specification).

From: Harald Mommer <harald.mommer@...nsynergy.com>

This is the virtio SPI Linux kernel driver compliant to the "PATCH v10"
draft virtio SPI specification.

Signed-off-by: Harald Mommer <Harald.Mommer@...nsynergy.com>
---
 drivers/spi/Kconfig      |  11 +
 drivers/spi/Makefile     |   1 +
 drivers/spi/spi-virtio.c | 430 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 442 insertions(+)
 create mode 100644 drivers/spi/spi-virtio.c

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ddae0fde798e..f4f617c79ad7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -1125,6 +1125,17 @@ config SPI_UNIPHIER
 
 	  If your SoC supports SCSSI, say Y here.
 
+config SPI_VIRTIO
+	tristate "Virtio SPI SPI Controller"
+	depends on VIRTIO
+	help
+	  This enables the Virtio SPI driver.
+
+	  Virtio SPI is an SPI driver for virtual machines using Virtio.
+
+	  If your Linux is a virtual machine using Virtio, say Y here.
+	  If unsure, say N.
+
 config SPI_XCOMM
 	tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
 	depends on I2C
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 4ff8d725ba5e..ff2243e44e00 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -146,6 +146,7 @@ spi-thunderx-objs			:= spi-cavium.o spi-cavium-thunderx.o
 obj-$(CONFIG_SPI_THUNDERX)		+= spi-thunderx.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
 obj-$(CONFIG_SPI_UNIPHIER)		+= spi-uniphier.o
+obj-$(CONFIG_SPI_VIRTIO)		+= spi-virtio.o
 obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
 obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 obj-$(CONFIG_SPI_XLP)			+= spi-xlp.o
diff --git a/drivers/spi/spi-virtio.c b/drivers/spi/spi-virtio.c
new file mode 100644
index 000000000000..39eb38184793
--- /dev/null
+++ b/drivers/spi/spi-virtio.c
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI bus driver for the Virtio SPI controller
+ * Copyright (C) 2023 OpenSynergy GmbH
+ */
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/virtio.h>
+#include <linux/virtio_ring.h>
+#include <linux/version.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/virtio_spi.h>
+
+/* virtio_spi private data structure */
+struct virtio_spi_priv {
+	/* The virtio device we're associated with */
+	struct virtio_device *vdev;
+	/* Pointer to the virtqueue */
+	struct virtqueue *vq;
+	/* Copy of config space mode_func_supported */
+	u32 mode_func_supported;
+	/* Copy of config space max_freq_hz */
+	u32 max_freq_hz;
+};
+
+struct virtio_spi_req {
+	struct completion completion;
+	struct spi_transfer_head transfer_head	____cacheline_aligned;
+	const uint8_t *tx_buf			____cacheline_aligned;
+	uint8_t *rx_buf				____cacheline_aligned;
+	struct spi_transfer_result result	____cacheline_aligned;
+};
+
+static struct spi_board_info board_info = {
+	.modalias = "spi-virtio",
+};
+
+static void virtio_spi_msg_done(struct virtqueue *vq)
+{
+	struct virtio_spi_req *req;
+	unsigned int len;
+
+	while ((req = virtqueue_get_buf(vq, &len)))
+		complete(&req->completion);
+}
+
+static int virtio_spi_one_transfer(struct virtio_spi_req *spi_req,
+				   struct spi_controller *ctrl,
+				   struct spi_message *msg,
+				   struct spi_transfer *xfer)
+{
+	struct virtio_spi_priv *priv = spi_controller_get_devdata(ctrl);
+	struct device *dev = &priv->vdev->dev;
+	struct spi_device *spi = msg->spi;
+	struct spi_transfer_head *th;
+	struct scatterlist sg_out_head, sg_out_payload;
+	struct scatterlist sg_in_result, sg_in_payload;
+	struct scatterlist *sgs[4];
+	unsigned int outcnt = 0u;
+	unsigned int incnt = 0u;
+	int ret;
+
+	th = &spi_req->transfer_head;
+
+	/* Fill struct spi_transfer_head */
+	th->chip_select_id = spi_get_chipselect(spi, 0);
+	th->bits_per_word = spi->bits_per_word;
+	/*
+	 * Got comment: "The virtio spec for cs_change is *not* what the Linux
+	 * cs_change field does, this will not do the right thing."
+	 * TODO: Understand/discuss this, still unclear what may be wrong here
+	 */
+	th->cs_change = xfer->cs_change;
+	th->tx_nbits = xfer->tx_nbits;
+	th->rx_nbits = xfer->rx_nbits;
+	th->reserved[0] = 0;
+	th->reserved[1] = 0;
+	th->reserved[2] = 0;
+
+	BUILD_BUG_ON(VIRTIO_SPI_CPHA != SPI_CPHA);
+	BUILD_BUG_ON(VIRTIO_SPI_CPOL != SPI_CPOL);
+	BUILD_BUG_ON(VIRTIO_SPI_CS_HIGH != SPI_CS_HIGH);
+	BUILD_BUG_ON(VIRTIO_SPI_MODE_LSB_FIRST != SPI_LSB_FIRST);
+
+	th->mode = cpu_to_le32(spi->mode & (SPI_LSB_FIRST | SPI_CS_HIGH |
+					    SPI_CPOL | SPI_CPHA));
+	if ((spi->mode & SPI_LOOP) != 0)
+		th->mode |= cpu_to_le32(VIRTIO_SPI_MODE_LOOP);
+
+	th->freq = cpu_to_le32(xfer->speed_hz);
+
+	ret = spi_delay_to_ns(&xfer->word_delay, xfer);
+	if (ret < 0) {
+		dev_warn(dev, "Cannot convert word_delay\n");
+		goto msg_done;
+	}
+	th->word_delay_ns = cpu_to_le32((u32)ret);
+
+	ret = spi_delay_to_ns(&xfer->delay, xfer);
+	if (ret < 0) {
+		dev_warn(dev, "Cannot convert delay\n");
+		goto msg_done;
+	}
+	th->cs_setup_ns = cpu_to_le32((u32)ret);
+	th->cs_delay_hold_ns = cpu_to_le32((u32)ret);
+
+	/* This is the "off" time when CS has to be deasserted for a moment */
+	ret = spi_delay_to_ns(&xfer->cs_change_delay, xfer);
+	if (ret < 0) {
+		dev_warn(dev, "Cannot convert cs_change_delay\n");
+		goto msg_done;
+	}
+	th->cs_change_delay_inactive_ns = cpu_to_le32((u32)ret);
+
+	/* Set buffers */
+	spi_req->tx_buf = xfer->tx_buf;
+	spi_req->rx_buf = xfer->rx_buf;
+
+	/* Prepare sending of virtio message */
+	init_completion(&spi_req->completion);
+
+	sg_init_one(&sg_out_head, &spi_req->transfer_head,
+		    sizeof(struct spi_transfer_head));
+	sgs[outcnt] = &sg_out_head;
+	outcnt++;
+
+	if (spi_req->tx_buf) {
+		sg_init_one(&sg_out_payload, spi_req->tx_buf, xfer->len);
+		sgs[outcnt] = &sg_out_payload;
+		outcnt++;
+	}
+
+	if (spi_req->rx_buf) {
+		sg_init_one(&sg_in_payload, spi_req->rx_buf, xfer->len);
+		sgs[outcnt + incnt] = &sg_in_payload;
+		incnt++;
+	}
+
+	sg_init_one(&sg_in_result, &spi_req->result,
+		    sizeof(struct spi_transfer_result));
+	sgs[outcnt + incnt] = &sg_in_result;
+	incnt++;
+
+	ret = virtqueue_add_sgs(priv->vq, sgs, outcnt, incnt, spi_req,
+				GFP_KERNEL);
+
+msg_done:
+	if (ret)
+		msg->status = ret;
+
+	return ret;
+}
+
+static int virtio_spi_transfer_one_message(struct spi_controller *ctrl,
+					   struct spi_message *msg)
+{
+	struct virtio_spi_priv *priv = spi_controller_get_devdata(ctrl);
+	struct virtio_spi_req *spi_req;
+	struct spi_transfer *xfer;
+	int ret = 0;
+
+	spi_req = kzalloc(sizeof(*spi_req), GFP_KERNEL);
+	if (!spi_req) {
+		ret = -ENOMEM;
+		goto no_mem;
+	}
+
+	/*
+	 * Simple implementation: Process message by message and wait for each
+	 * message to be completed by the device side.
+	 */
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		ret = virtio_spi_one_transfer(spi_req, ctrl, msg, xfer);
+		if (ret)
+			goto msg_done;
+
+		virtqueue_kick(priv->vq);
+
+		wait_for_completion(&spi_req->completion);
+
+		/* Read result from message */
+		ret = (int)spi_req->result.result;
+		if (ret)
+			goto msg_done;
+	}
+
+msg_done:
+	kfree(spi_req);
+no_mem:
+	msg->status = ret;
+	spi_finalize_current_message(ctrl);
+
+	return ret;
+}
+
+static void virtio_spi_read_config(struct virtio_device *vdev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(&vdev->dev);
+	struct virtio_spi_priv *priv = vdev->priv;
+	u8 cs_max_number;
+	u8 tx_nbits_supported;
+	u8 rx_nbits_supported;
+
+	cs_max_number = virtio_cread8(vdev, offsetof(struct virtio_spi_config,
+						     cs_max_number));
+	ctrl->num_chipselect = cs_max_number;
+
+	/* Set the mode bits which are understood by this driver */
+	priv->mode_func_supported =
+		virtio_cread32(vdev, offsetof(struct virtio_spi_config,
+					      mode_func_supported));
+	ctrl->mode_bits = priv->mode_func_supported &
+			  (VIRTIO_SPI_CS_HIGH | VIRTIO_SPI_MODE_LSB_FIRST);
+	if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_CPHA_1) != 0)
+		ctrl->mode_bits |= VIRTIO_SPI_CPHA;
+	if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_CPOL_1) != 0)
+		ctrl->mode_bits |= VIRTIO_SPI_CPOL;
+	if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_LSB_FIRST) != 0)
+		ctrl->mode_bits |= SPI_LSB_FIRST;
+	if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_LOOPBACK) != 0)
+		ctrl->mode_bits |= SPI_LOOP;
+	tx_nbits_supported =
+		virtio_cread8(vdev, offsetof(struct virtio_spi_config,
+					     tx_nbits_supported));
+	if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_DUAL) != 0)
+		ctrl->mode_bits |= SPI_TX_DUAL;
+	if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_QUAD) != 0)
+		ctrl->mode_bits |= SPI_TX_QUAD;
+	if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_OCTAL) != 0)
+		ctrl->mode_bits |= SPI_TX_OCTAL;
+	rx_nbits_supported =
+		virtio_cread8(vdev, offsetof(struct virtio_spi_config,
+					     rx_nbits_supported));
+	if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_DUAL) != 0)
+		ctrl->mode_bits |= SPI_RX_DUAL;
+	if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_QUAD) != 0)
+		ctrl->mode_bits |= SPI_RX_QUAD;
+	if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_OCTAL) != 0)
+		ctrl->mode_bits |= SPI_RX_OCTAL;
+
+	ctrl->bits_per_word_mask =
+		virtio_cread32(vdev, offsetof(struct virtio_spi_config,
+					      bits_per_word_mask));
+
+	priv->max_freq_hz =
+		virtio_cread32(vdev, offsetof(struct virtio_spi_config,
+					      max_freq_hz));
+}
+
+static int virtio_spi_find_vqs(struct virtio_spi_priv *priv)
+{
+	struct virtqueue *vq;
+
+	vq = virtio_find_single_vq(priv->vdev, virtio_spi_msg_done, "spi-rq");
+	if (IS_ERR(vq))
+		return (int)PTR_ERR(vq);
+	priv->vq = vq;
+	return 0;
+}
+
+/* Function must not be called before virtio_spi_find_vqs() has been run */
+static void virtio_spi_del_vq(struct virtio_device *vdev)
+{
+	virtio_reset_device(vdev);
+	vdev->config->del_vqs(vdev);
+}
+
+static int virtio_spi_validate(struct virtio_device *vdev)
+{
+	/*
+	 * SPI needs always access to the config space.
+	 * Check that the driver can access the config space
+	 */
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) {
+		dev_err(&vdev->dev,
+			"device does not comply with spec version 1.x\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int virtio_spi_probe(struct virtio_device *vdev)
+{
+	struct device_node *np = vdev->dev.parent->of_node;
+	struct virtio_spi_priv *priv;
+	struct spi_controller *ctrl;
+	int err;
+	u32 bus_num;
+	u16 csi;
+
+	ctrl = devm_spi_alloc_host(&vdev->dev, sizeof(*priv));
+	if (!ctrl) {
+		dev_err(&vdev->dev, "Kernel memory exhausted in %s()\n",
+			__func__);
+		err = -ENOMEM;
+		goto err_return;
+	}
+
+	priv = spi_controller_get_devdata(ctrl);
+	priv->vdev = vdev;
+	vdev->priv = priv;
+	dev_set_drvdata(&vdev->dev, ctrl);
+
+	err = of_property_read_u32(np, "spi,bus-num", &bus_num);
+	if (!err && bus_num <= S16_MAX)
+		ctrl->bus_num = (s16)bus_num;
+
+	virtio_spi_read_config(vdev);
+
+	/* Method to transfer a single SPI message */
+	ctrl->transfer_one_message = virtio_spi_transfer_one_message;
+
+	/* Initialize virtqueues */
+	err = virtio_spi_find_vqs(priv);
+	if (err) {
+		dev_err(&vdev->dev, "Cannot setup virtqueues\n");
+		goto err_return;
+	}
+
+	err = spi_register_controller(ctrl);
+	if (err) {
+		dev_err(&vdev->dev, "Cannot register controller\n");
+		goto err_return;
+	}
+
+	board_info.max_speed_hz = priv->max_freq_hz;
+	/* spi_new_device() currently does not use bus_num but better set it */
+	board_info.bus_num = (u16)ctrl->bus_num;
+
+	/* Add chip selects to controller */
+	for (csi = 0; csi < ctrl->num_chipselect; csi++) {
+		dev_dbg(&vdev->dev, "Setting up CS=%u\n", csi);
+		board_info.chip_select = csi;
+		/* TODO: Discuss setting of board_info.mode */
+		if (!(priv->mode_func_supported & VIRTIO_SPI_CS_HIGH))
+			board_info.mode = SPI_MODE_0;
+		else
+			board_info.mode = SPI_MODE_0 | SPI_CS_HIGH;
+		if (!spi_new_device(ctrl, &board_info)) {
+			dev_err(&vdev->dev, "Cannot setup device %u\n", csi);
+			err = -ENODEV;
+			goto err_return;
+		}
+	}
+
+	return 0;
+
+err_return:
+	return err;
+}
+
+static void virtio_spi_remove(struct virtio_device *vdev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(&vdev->dev);
+
+	spi_unregister_controller(ctrl);
+	virtio_spi_del_vq(vdev);
+}
+
+static int virtio_spi_freeze(struct virtio_device *vdev)
+{
+	struct device *dev = &vdev->dev;
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	int ret;
+
+	/* Stop the queue running */
+	ret = spi_controller_suspend(ctrl);
+	if (ret) {
+		dev_warn(dev, "cannot suspend controller (%d)\n", ret);
+		return ret;
+	}
+
+	virtio_spi_del_vq(vdev);
+	return 0;
+}
+
+static int virtio_spi_restore(struct virtio_device *vdev)
+{
+	struct device *dev = &vdev->dev;
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	int ret;
+
+	ret = virtio_spi_find_vqs(vdev->priv);
+	if (ret) {
+		dev_err(dev, "problem starting vqueue (%d)\n", ret);
+		return ret;
+	}
+
+	ret = spi_controller_resume(ctrl);
+	if (ret)
+		dev_err(dev, "problem resuming controller (%d)\n", ret);
+
+	return ret;
+}
+
+static struct virtio_device_id virtio_spi_id_table[] = {
+	{ VIRTIO_ID_SPI, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+static struct virtio_driver virtio_spi_driver = {
+	.driver.name = KBUILD_MODNAME,
+	.driver.owner = THIS_MODULE,
+	.id_table = virtio_spi_id_table,
+	.validate = virtio_spi_validate,
+	.probe = virtio_spi_probe,
+	.remove = virtio_spi_remove,
+	.freeze = pm_sleep_ptr(virtio_spi_freeze),
+	.restore = pm_sleep_ptr(virtio_spi_restore),
+};
+
+module_virtio_driver(virtio_spi_driver);
+MODULE_DEVICE_TABLE(virtio, virtio_spi_id_table);
+
+MODULE_AUTHOR("OpenSynergy GmbH");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Virtio SPI bus driver");
-- 
2.25.1

Powered by blists - more mailing lists