linux-kernel - Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: describe the WLAN module of QCA6390

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAA8EJpqZ8zbNcK1BsJaaoK3Fje9KhrvFvJpgdBa-US3eMhOmOw@mail.gmail.com>
Date: Thu, 4 Jan 2024 15:44:16 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bartosz Golaszewski <brgl@...ev.pl>
Cc: Kalle Valo <kvalo@...nel.org>, "David S . Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Rob Herring <robh+dt@...nel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, 
	Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>, 
	Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>, 
	Bjorn Helgaas <bhelgaas@...gle.com>, Heiko Stuebner <heiko@...ech.de>, 
	Jernej Skrabec <jernej.skrabec@...il.com>, Chris Morgan <macromorgan@...mail.com>, 
	Linus Walleij <linus.walleij@...aro.org>, Geert Uytterhoeven <geert+renesas@...der.be>, 
	Arnd Bergmann <arnd@...db.de>, Neil Armstrong <neil.armstrong@...aro.org>, 
	Nícolas F . R . A . Prado <nfraprado@...labora.com>, 
	Marek Szyprowski <m.szyprowski@...sung.com>, Peng Fan <peng.fan@....com>, 
	Robert Richter <rrichter@....com>, Dan Williams <dan.j.williams@...el.com>, 
	Jonathan Cameron <Jonathan.Cameron@...wei.com>, Terry Bowman <terry.bowman@....com>, 
	Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>, 
	Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>, 
	Huacai Chen <chenhuacai@...nel.org>, Alex Elder <elder@...aro.org>, 
	Srini Kandagatla <srinivas.kandagatla@...aro.org>, 
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>, linux-wireless@...r.kernel.org, 
	netdev@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org, 
	linux-arm-kernel@...ts.infradead.org, linux-pci@...r.kernel.org, 
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [RFC 2/9] arm64: dts: qcom: qrb5165-rb5: describe the WLAN module
 of QCA6390

On Thu, 4 Jan 2024 at 15:03, Bartosz Golaszewski <brgl@...ev.pl> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Describe the ath11k WLAN on-board the QCA6390 module. Include the
> relevant regulators and the enable GPIO.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index cd0db4f31d4a..721f86af952b 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -734,6 +734,22 @@ &pcie0_phy {
>         vdda-pll-supply = <&vreg_l9a_1p2>;
>  };
>
> +&pcieport0 {
> +       wifi@0 {
> +               compatible = "pci17cb,1101";
> +               reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&wlan_en_state>;
> +
> +               enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
> +
> +               vddpmu-supply = <&vreg_s2f_0p95>;
> +               vddpcie1-supply = <&vreg_s8c_1p3>;
> +               vddpcie2-supply = <&vreg_s5a_1p9>;

If I remember correctly, qca6390 has at least 8 power supplies AON,
PMU, 3xRFA, 2xPCIe and VDDIO.

Moreover, these bindings do not solve another problem: the PMU is
shared between WiFi and BT parts. For the next gen (WCN6855) this
becomes even more important, see the code in msm-5.10 which makes sure
that there is a proper time between one of the units going down and
another one being powered on.

> +       };
> +};
> +
>  &pcie1 {
>         status = "okay";
>  };
> @@ -1303,6 +1319,14 @@ sdc2_card_det_n: sd-card-det-n-state {
>                 function = "gpio";
>                 bias-pull-up;
>         };
> +
> +       wlan_en_state: wlan-default-state {
> +               pins = "gpio20";
> +               function = "gpio";
> +               drive-strength = <16>;
> +               output-low;
> +               bias-pull-up;
> +       };
>  };
>
>  &uart6 {
> --
> 2.40.1
>
>


-- 
With best wishes
Dmitry