| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240105075733.36331-3-alexis.lothore@bootlin.com>
Date: Fri, 5 Jan 2024 08:57:33 +0100
From: Alexis Lothoré <alexis.lothore@...tlin.com>
To: linux-wireless@...r.kernel.org
Cc: Ajay Singh <ajay.kathat@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Kalle Valo <kvalo@...nel.org>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
linux-kernel@...r.kernel.org,
Christophe JAILLET <christophe.jaillet@...adoo.fr>
Subject: [PATCH v2 2/2] wifi: wilc1000: fix RCU usage in connect path
From: Alexis Lothoré <alexis.lothore@...tlin.com>
With lockdep enabled, calls to the connect function from cfg802.11 layer
lead to the following warning:
=============================
WARNING: suspicious RCU usage
6.7.0-rc1-wt+ #333 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/hif.c:386
suspicious rcu_dereference_check() usage!
[...]
stack backtrace:
CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4
wilc_parse_join_bss_param from connect+0x2c4/0x648
connect from cfg80211_connect+0x30c/0xb74
cfg80211_connect from nl80211_connect+0x860/0xa94
nl80211_connect from genl_rcv_msg+0x3fc/0x59c
genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8
netlink_rcv_skb from genl_rcv+0x2c/0x3c
genl_rcv from netlink_unicast+0x3b0/0x550
netlink_unicast from netlink_sendmsg+0x368/0x688
netlink_sendmsg from ____sys_sendmsg+0x190/0x430
____sys_sendmsg from ___sys_sendmsg+0x110/0x158
___sys_sendmsg from sys_sendmsg+0xe8/0x150
sys_sendmsg from ret_fast_syscall+0x0/0x1c
This warning is emitted because in the connect path, when trying to parse
target BSS parameters, we dereference a RCU pointer whithout being in RCU
critical section.
Fix RCU dereference usage by moving it to a RCU read critical section. To
avoid wrapping the whole wilc_parse_join_bss_param under the critical
section, just use the critical section to copy ies data
Fixes: c460495ee072 ("staging: wilc1000: fix incorrent type in initializer")
Signed-off-by: Alexis Lothoré <alexis.lothore@...tlin.com>
---
Changes in v2:
- fix leak in early return
---
drivers/net/wireless/microchip/wilc1000/hif.c | 36 ++++++++++++-------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/hif.c b/drivers/net/wireless/microchip/wilc1000/hif.c
index 6f1218a51061..d2b8c2630819 100644
--- a/drivers/net/wireless/microchip/wilc1000/hif.c
+++ b/drivers/net/wireless/microchip/wilc1000/hif.c
@@ -377,38 +377,49 @@ struct wilc_join_bss_param *
wilc_parse_join_bss_param(struct cfg80211_bss *bss,
struct cfg80211_crypto_settings *crypto)
{
- const struct cfg80211_bss_ies *ies = rcu_dereference(bss->ies);
- const u8 *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
+ const u8 *ies_data, *tim_elm, *ssid_elm, *rates_ie, *supp_rates_ie;
const u8 *ht_ie, *wpa_ie, *wmm_ie, *rsn_ie;
struct ieee80211_p2p_noa_attr noa_attr;
+ const struct cfg80211_bss_ies *ies;
struct wilc_join_bss_param *param;
- u8 rates_len = 0;
+ u8 rates_len = 0, ies_len;
int ret;
param = kzalloc(sizeof(*param), GFP_KERNEL);
if (!param)
return NULL;
+ rcu_read_lock();
+ ies = rcu_dereference(bss->ies);
+ ies_data = kmemdup(ies->data, ies->len, GFP_ATOMIC);
+ if (!ies_data) {
+ rcu_read_unlock();
+ kfree(param);
+ return NULL;
+ }
+ ies_len = ies->len;
+ rcu_read_unlock();
+
param->beacon_period = cpu_to_le16(bss->beacon_interval);
param->cap_info = cpu_to_le16(bss->capability);
param->bss_type = WILC_FW_BSS_TYPE_INFRA;
param->ch = ieee80211_frequency_to_channel(bss->channel->center_freq);
ether_addr_copy(param->bssid, bss->bssid);
- ssid_elm = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len);
+ ssid_elm = cfg80211_find_ie(WLAN_EID_SSID, ies_data, ies_len);
if (ssid_elm) {
if (ssid_elm[1] <= IEEE80211_MAX_SSID_LEN)
memcpy(param->ssid, ssid_elm + 2, ssid_elm[1]);
}
- tim_elm = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
+ tim_elm = cfg80211_find_ie(WLAN_EID_TIM, ies_data, ies_len);
if (tim_elm && tim_elm[1] >= 2)
param->dtim_period = tim_elm[3];
memset(param->p_suites, 0xFF, 3);
memset(param->akm_suites, 0xFF, 3);
- rates_ie = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies->data, ies->len);
+ rates_ie = cfg80211_find_ie(WLAN_EID_SUPP_RATES, ies_data, ies_len);
if (rates_ie) {
rates_len = rates_ie[1];
if (rates_len > WILC_MAX_RATES_SUPPORTED)
@@ -419,7 +430,7 @@ wilc_parse_join_bss_param(struct cfg80211_bss *bss,
if (rates_len < WILC_MAX_RATES_SUPPORTED) {
supp_rates_ie = cfg80211_find_ie(WLAN_EID_EXT_SUPP_RATES,
- ies->data, ies->len);
+ ies_data, ies_len);
if (supp_rates_ie) {
u8 ext_rates = supp_rates_ie[1];
@@ -434,11 +445,11 @@ wilc_parse_join_bss_param(struct cfg80211_bss *bss,
}
}
- ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies->data, ies->len);
+ ht_ie = cfg80211_find_ie(WLAN_EID_HT_CAPABILITY, ies_data, ies_len);
if (ht_ie)
param->ht_capable = true;
- ret = cfg80211_get_p2p_attr(ies->data, ies->len,
+ ret = cfg80211_get_p2p_attr(ies_data, ies_len,
IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
(u8 *)&noa_attr, sizeof(noa_attr));
if (ret > 0) {
@@ -462,7 +473,7 @@ wilc_parse_join_bss_param(struct cfg80211_bss *bss,
}
wmm_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
WLAN_OUI_TYPE_MICROSOFT_WMM,
- ies->data, ies->len);
+ ies_data, ies_len);
if (wmm_ie) {
struct ieee80211_wmm_param_ie *ie;
@@ -477,13 +488,13 @@ wilc_parse_join_bss_param(struct cfg80211_bss *bss,
wpa_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
WLAN_OUI_TYPE_MICROSOFT_WPA,
- ies->data, ies->len);
+ ies_data, ies_len);
if (wpa_ie) {
param->mode_802_11i = 1;
param->rsn_found = true;
}
- rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, ies->data, ies->len);
+ rsn_ie = cfg80211_find_ie(WLAN_EID_RSN, ies_data, ies_len);
if (rsn_ie) {
int rsn_ie_len = sizeof(struct element) + rsn_ie[1];
int offset = 8;
@@ -517,6 +528,7 @@ wilc_parse_join_bss_param(struct cfg80211_bss *bss,
param->akm_suites[i] = crypto->akm_suites[i] & 0xFF;
}
+ kfree(ies_data);
return (void *)param;
}
--
2.42.1
Powered by blists - more mailing lists