linux-kernel - [PATCH] x86/trampoline: Bypass compat mode in trampoline

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240106010106.25772-1-kirill.shutemov@linux.intel.com>
Date: Sat,  6 Jan 2024 04:01:06 +0300
From: "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>
To: Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...hat.com>,
	Borislav Petkov <bp@...en8.de>,
	Dave Hansen <dave.hansen@...ux.intel.com>
Cc: x86@...nel.org,
	"H. Peter Anvin" <hpa@...or.com>,
	linux-kernel@...r.kernel.org,
	"Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>,
	Andi Kleen <ak@...ux.intel.com>,
	Sean Christopherson <seanjc@...gle.com>
Subject: [PATCH] x86/trampoline: Bypass compat mode in trampoline_start64() if not needed

The trampoline_start64() vector is used when a secondary CPU starts in
64-bit mode. The current implementation directly enters compatibility
mode. It is necessary to disable paging and re-enable it in the correct
paging mode: either 4- or 5-level, depending on the configuration.

The X86S[1] ISA does not support compatibility mode in ring 0, and
paging cannot be disabled.

The trampoline_start64() function is reworked to only enter compatibility
mode if it is necessary to change the paging mode. If the CPU is already
in the desired paging mode, it will proceed in long mode.

This change will allow a secondary CPU to boot on an X86S machine as
long as the CPU is already in the correct paging mode.

In the future, there will be a mechanism to switch between paging modes
without disabling paging.

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/envisioning-future-simplified-architecture.html

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
Reviewed-by: Andi Kleen <ak@...ux.intel.com>
Cc: Sean Christopherson <seanjc@...gle.com>
---
 arch/x86/realmode/rm/trampoline_64.S | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index c9f76fae902e..70c6dff658e6 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -220,6 +220,33 @@ SYM_CODE_START(trampoline_start64)
 	lidt	tr_idt(%rip)
 	lgdt	tr_gdt64(%rip)
 
+	/* Check if paging mode has to be changed */
+	movq	%cr4, %rax
+	xorq	pa_tr_cr4, %rax
+	andq	$X86_CR4_LA57, %rax
+	jnz	.L_switch_paging
+
+	/* Paging mode is correct proceed in 64-bit mode */
+
+	LOCK_AND_LOAD_REALMODE_ESP lock_pa=1
+
+	movw	$__KERNEL_DS, %dx
+	movl	%edx, %ss
+	addl	$pa_real_mode_base, %esp
+	movl	%edx, %ds
+	movl	%edx, %es
+	movl	%edx, %fs
+	movl	%edx, %gs
+
+	movl	$pa_trampoline_pgd, %eax
+	movq	%rax, %cr3
+
+	jmpq	*tr_start(%rip)
+.L_switch_paging:
+	/*
+	 * To switch between 4- and 5-level paging modes, it is necessary
+	 * to disable paging. This must be done in the compatibility mode.
+	 */
 	ljmpl	*tr_compat(%rip)
 SYM_CODE_END(trampoline_start64)
 
-- 
2.41.0