| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240108093702.13476-6-dima.fedrau@gmail.com>
Date: Mon, 8 Jan 2024 10:37:00 +0100
From: Dimitri Fedrau <dima.fedrau@...il.com>
To:
Cc: Dimitri Fedrau <dima.fedrau@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Stefan Eichenberger <eichest@...il.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v4 net-next 5/5] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
Add a driver for the Marvell 88Q2220. This driver allows to detect the
link, switch between 100BASE-T1 and 1000BASE-T1 and switch between
master and slave mode. Autonegoation is supported.
Signed-off-by: Dimitri Fedrau <dima.fedrau@...il.com>
---
drivers/net/phy/marvell-88q2xxx.c | 206 +++++++++++++++++++++++++++++-
include/linux/marvell_phy.h | 1 +
2 files changed, 201 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index dcebb4643aff..8a0dae82ab2d 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -6,6 +6,8 @@
#include <linux/marvell_phy.h>
#include <linux/phy.h>
+#define PHY_ID_88Q2220_REVB0 (MARVELL_PHY_ID_88Q2220 | 0x1)
+
#define MDIO_MMD_AN_MV_STAT 32769
#define MDIO_MMD_AN_MV_STAT_ANEG 0x0100
#define MDIO_MMD_AN_MV_STAT_LOCAL_RX 0x1000
@@ -13,6 +15,11 @@
#define MDIO_MMD_AN_MV_STAT_LOCAL_MASTER 0x4000
#define MDIO_MMD_AN_MV_STAT_MS_CONF_FAULT 0x8000
+#define MDIO_MMD_AN_MV_STAT2 32794
+#define MDIO_MMD_AN_MV_STAT2_AN_RESOLVED 0x0800
+#define MDIO_MMD_AN_MV_STAT2_100BT1 0x2000
+#define MDIO_MMD_AN_MV_STAT2_1000BT1 0x4000
+
#define MDIO_MMD_PCS_MV_100BT1_STAT1 33032
#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR 0x00ff
#define MDIO_MMD_PCS_MV_100BT1_STAT1_JABBER 0x0100
@@ -29,6 +36,42 @@
#define MDIO_MMD_PCS_MV_RX_STAT 33328
+struct mmd_val {
+ int devad;
+ u32 regnum;
+ u16 val;
+};
+
+const struct mmd_val mv88q222x_revb0_init_seq0[] = {
+ { MDIO_MMD_PCS, 0x8033, 0x6801 },
+ { MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+ { MDIO_MMD_PMAPMD, MDIO_CTRL1,
+ MDIO_CTRL1_LPOWER | MDIO_PMA_CTRL1_SPEED1000 },
+ { MDIO_MMD_PCS, 0xfe1b, 0x48 },
+ { MDIO_MMD_PCS, 0xffe4, 0x6b6 },
+ { MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0 },
+ { MDIO_MMD_PCS, MDIO_CTRL1, 0x0 },
+};
+
+const struct mmd_val mv88q222x_revb0_init_seq1[] = {
+ { MDIO_MMD_PCS, 0xfe79, 0x0 },
+ { MDIO_MMD_PCS, 0xfe07, 0x125a },
+ { MDIO_MMD_PCS, 0xfe09, 0x1288 },
+ { MDIO_MMD_PCS, 0xfe08, 0x2588 },
+ { MDIO_MMD_PCS, 0xfe11, 0x1105 },
+ { MDIO_MMD_PCS, 0xfe72, 0x042c },
+ { MDIO_MMD_PCS, 0xfbba, 0xcb2 },
+ { MDIO_MMD_PCS, 0xfbbb, 0xc4a },
+ { MDIO_MMD_AN, 0x8032, 0x2020 },
+ { MDIO_MMD_AN, 0x8031, 0xa28 },
+ { MDIO_MMD_AN, 0x8031, 0xc28 },
+ { MDIO_MMD_PCS, 0xffdb, 0xfc10 },
+ { MDIO_MMD_PCS, 0xfe1b, 0x58 },
+ { MDIO_MMD_PCS, 0xfe79, 0x4 },
+ { MDIO_MMD_PCS, 0xfe5f, 0xe8 },
+ { MDIO_MMD_PCS, 0xfe05, 0x755c },
+};
+
static int mv88q2xxx_soft_reset(struct phy_device *phydev)
{
int ret;
@@ -125,24 +168,90 @@ static int mv88q2xxx_read_link_100m(struct phy_device *phydev)
static int mv88q2xxx_read_link(struct phy_device *phydev)
{
- int ret;
-
/* The 88Q2XXX PHYs do not have the PMA/PMD status register available,
* therefore we need to read the link status from the vendor specific
* registers depending on the speed.
*/
+
if (phydev->speed == SPEED_1000)
- ret = mv88q2xxx_read_link_gbit(phydev);
+ return mv88q2xxx_read_link_gbit(phydev);
+ else if (phydev->speed == SPEED_100)
+ return mv88q2xxx_read_link_100m(phydev);
+
+ phydev->link = false;
+ return 0;
+}
+
+static int mv88q2xxx_read_master_slave_state(struct phy_device *phydev)
+{
+ int ret;
+
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MDIO_MMD_AN_MV_STAT_LOCAL_MASTER)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
else
- ret = mv88q2xxx_read_link_100m(phydev);
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
- return ret;
+ return 0;
+}
+
+static int mv88q2xxx_read_aneg_speed(struct phy_device *phydev)
+{
+ int ret;
+
+ phydev->speed = SPEED_UNKNOWN;
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_MMD_AN_MV_STAT2);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & MDIO_MMD_AN_MV_STAT2_AN_RESOLVED))
+ return 0;
+
+ if (ret & MDIO_MMD_AN_MV_STAT2_100BT1)
+ phydev->speed = SPEED_100;
+ else if (ret & MDIO_MMD_AN_MV_STAT2_1000BT1)
+ phydev->speed = SPEED_1000;
+
+ return 0;
}
static int mv88q2xxx_read_status(struct phy_device *phydev)
{
int ret;
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ /* We have to get the negotiated speed first, otherwise we are
+ * not able to read the link.
+ */
+ ret = mv88q2xxx_read_aneg_speed(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = mv88q2xxx_read_link(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = genphy_c45_read_lpa(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = genphy_c45_baset1_read_status(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = mv88q2xxx_read_master_slave_state(phydev);
+ if (ret < 0)
+ return ret;
+
+ phy_resolve_aneg_linkmode(phydev);
+
+ return 0;
+ }
+
ret = mv88q2xxx_read_link(phydev);
if (ret < 0)
return ret;
@@ -171,7 +280,9 @@ static int mv88q2xxx_get_features(struct phy_device *phydev)
* sequence provided by Marvell. Disable it for now until a proper
* workaround is found or a new PHY revision is released.
*/
- linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+ if (phydev->drv->phy_id == MARVELL_PHY_ID_88Q2110)
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->supported);
return 0;
}
@@ -241,6 +352,75 @@ static int mv88q2xxx_get_sqi_max(struct phy_device *phydev)
return 15;
}
+static int mv88q222x_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable RESET of DCL */
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed == SPEED_1000) {
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS, 0xfe1b, 0x48);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_CTRL,
+ MDIO_PCS_1000BT1_CTRL_RESET);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS, 0xffe4, 0xc);
+ if (ret < 0)
+ return ret;
+
+ /* Disable RESET of DCL */
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed == SPEED_1000)
+ return phy_write_mmd(phydev, MDIO_MMD_PCS, 0xfe1b, 0x58);
+
+ return 0;
+}
+
+static int mv88q222x_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_config_aneg(phydev);
+ if (ret)
+ return ret;
+
+ return mv88q222x_soft_reset(phydev);
+}
+
+static int mv88q222x_revb0_config_init(struct phy_device *phydev)
+{
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq0); i++) {
+ ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq0[i].devad,
+ mv88q222x_revb0_init_seq0[i].regnum,
+ mv88q222x_revb0_init_seq0[i].val);
+ if (ret < 0)
+ return ret;
+ }
+
+ usleep_range(5000, 10000);
+
+ for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq1); i++) {
+ ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq1[i].devad,
+ mv88q222x_revb0_init_seq1[i].regnum,
+ mv88q222x_revb0_init_seq1[i].val);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* The 88Q2XXX PHYs do have the extended ability register available, but
+ * register MDIO_PMA_EXTABLE where they should signalize it does not
+ * work according to specification. Therefore, we force it here.
+ */
+ phydev->pma_extable = MDIO_PMA_EXTABLE_BT1;
+
+ return 0;
+}
+
static struct phy_driver mv88q2xxx_driver[] = {
{
.phy_id = MARVELL_PHY_ID_88Q2110,
@@ -255,12 +435,26 @@ static struct phy_driver mv88q2xxx_driver[] = {
.get_sqi = mv88q2xxx_get_sqi,
.get_sqi_max = mv88q2xxx_get_sqi_max,
},
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0),
+ .name = "mv88q2220",
+ .get_features = mv88q2xxx_get_features,
+ .config_aneg = mv88q222x_config_aneg,
+ .aneg_done = genphy_c45_aneg_done,
+ .config_init = mv88q222x_revb0_config_init,
+ .read_status = mv88q2xxx_read_status,
+ .soft_reset = mv88q222x_soft_reset,
+ .set_loopback = genphy_c45_loopback,
+ .get_sqi = mv88q2xxx_get_sqi,
+ .get_sqi_max = mv88q2xxx_get_sqi_max,
+ },
};
module_phy_driver(mv88q2xxx_driver);
static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = {
{ MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK },
+ { PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), },
{ /*sentinel*/ }
};
MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl);
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 9b54c4f0677f..693eba9869e4 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -26,6 +26,7 @@
#define MARVELL_PHY_ID_88E2110 0x002b09b0
#define MARVELL_PHY_ID_88X2222 0x01410f10
#define MARVELL_PHY_ID_88Q2110 0x002b0980
+#define MARVELL_PHY_ID_88Q2220 0x002b0b20
/* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
#define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0
--
2.39.2
Powered by blists - more mailing lists