linux-kernel - [PATCH v11 3/4] firmware: qcom: scm: Rework dload mode availability check

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1704727654-13999-4-git-send-email-quic_mojha@quicinc.com>
Date: Mon, 8 Jan 2024 20:57:33 +0530
From: Mukesh Ojha <quic_mojha@...cinc.com>
To: <andersson@...nel.org>, <konrad.dybcio@...aro.org>,
        <linus.walleij@...aro.org>
CC: <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-gpio@...r.kernel.org>, Mukesh Ojha <quic_mojha@...cinc.com>
Subject: [PATCH v11 3/4] firmware: qcom: scm: Rework dload mode availability check

QCOM_SCM_BOOT_SET_DLOAD_MODE was only valid for very older
target and firmware and for recent targets there is dload
mode tcsr registers is available to set the download mode.

So, it is better to keep it as fallback check instead of
checking its availability and failing it always.

Signed-off-by: Mukesh Ojha <quic_mojha@...cinc.com>
---
 drivers/firmware/qcom/qcom_scm.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 4421f219fe9a..87bcd5c02f2b 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -532,18 +532,16 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 static void qcom_scm_set_download_mode(bool enable)
 {
 	u32 val = enable ? QCOM_DLOAD_FULLDUMP : QCOM_DLOAD_NODUMP;
-	bool avail;
 	int ret = 0;
 
-	avail = __qcom_scm_is_call_available(__scm->dev,
-					     QCOM_SCM_SVC_BOOT,
-					     QCOM_SCM_BOOT_SET_DLOAD_MODE);
-	if (avail) {
-		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
-	} else if (__scm->dload_mode_addr) {
+	if (__scm->dload_mode_addr) {
 		ret = qcom_scm_io_rmw(__scm->dload_mode_addr,
 				      QCOM_DLOAD_MASK,
 				      FIELD_PREP(QCOM_DLOAD_MASK, val));
+	} else if (__qcom_scm_is_call_available(__scm->dev,
+						QCOM_SCM_SVC_BOOT,
+						QCOM_SCM_BOOT_SET_DLOAD_MODE)) {
+		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
 	} else {
 		dev_err(__scm->dev,
 			"No available mechanism for setting download mode\n");
-- 
2.7.4