linux-kernel - [PATCH 10/14] arm64: zynqmp: Remove incorrect comment from kv260s

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0bd166345ce78097a1ff8d4307545f5026c92267.1704728353.git.michal.simek@amd.com>
Date: Mon, 8 Jan 2024 16:39:21 +0100
From: Michal Simek <michal.simek@....com>
To: <linux-kernel@...r.kernel.org>, <monstr@...str.eu>,
	<michal.simek@...inx.com>, <git@...inx.com>
CC: Conor Dooley <conor+dt@...nel.org>, Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>, Rob Herring <robh+dt@...nel.org>, "open
 list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@...r.kernel.org>, "moderated list:ARM/ZYNQ ARCHITECTURE"
	<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 10/14] arm64: zynqmp: Remove incorrect comment from kv260s

Remove incorrect comment about required nodes by spec. In past gem3 was the
part of SOM specification but it has been revisit by introducting KR260.

Signed-off-by: Michal Simek <michal.simek@....com>
---

 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 4 ++--
 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index e7940067ff3c..b7b94254cc09 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -139,7 +139,7 @@ &sdhci1 { /* on CC with tuned parameters */
 	bus-width = <4>;
 };
 
-&gem3 { /* required by spec */
+&gem3 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
@@ -166,7 +166,7 @@ phy0: ethernet-phy@1 {
 	};
 };
 
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
 	status = "okay";
 
 	pinctrl_uart1_default: uart1-default {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index f72312926299..1446c2b19de7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -122,7 +122,7 @@ &sdhci1 { /* on CC with tuned parameters */
 	bus-width = <4>;
 };
 
-&gem3 { /* required by spec */
+&gem3 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
@@ -149,7 +149,7 @@ phy0: ethernet-phy@1 {
 	};
 };
 
-&pinctrl0 { /* required by spec */
+&pinctrl0 {
 	status = "okay";
 
 	pinctrl_uart1_default: uart1-default {
-- 
2.36.1