linux-kernel - [PATCH V2 1/2] dt-bindings: Add PCIe "preserve-boot-config" property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240110030725.710547-2-vidyas@nvidia.com>
Date: Wed, 10 Jan 2024 08:37:24 +0530
From: Vidya Sagar <vidyas@...dia.com>
To: <lpieralisi@...nel.org>, <kw@...ux.com>, <robh@...nel.org>,
	<bhelgaas@...gle.com>, <krzysztof.kozlowski+dt@...aro.org>,
	<conor+dt@...nel.org>, <will@...nel.org>, <frowand.list@...il.com>
CC: <linux-pci@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<treding@...dia.com>, <jonathanh@...dia.com>, <kthota@...dia.com>,
	<mmaddireddy@...dia.com>, <vidyas@...dia.com>, <sagar.tv@...il.com>
Subject: [PATCH V2 1/2] dt-bindings: Add PCIe "preserve-boot-config" property

The existing "linux,pci-probe-only" property applies at a system level
and it is not possible to selectively convey individual host bridge's
requirement w.r.t preserving the boot configuration done by the platform
firmware to the kernel. "preserve-boot-config" addresses that concern
and can be used to preserve the boot configuration for host bridges
selectivey.

Signed-off-by: Vidya Sagar <vidyas@...dia.com>
---
V2:
* None

 Documentation/devicetree/bindings/pci/pci.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
index 6a8f2874a24d..0a5ff998cbe8 100644
--- a/Documentation/devicetree/bindings/pci/pci.txt
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -32,6 +32,10 @@ driver implementation may support the following properties:
    root port to downstream device and host bridge drivers can do programming
    which depends on CLKREQ signal existence. For example, programming root port
    not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal.
+- preserve-boot-config:
+   If present this property specifies that this host bridge is already
+   configured by the platform firmware and the OS doesn't need to reconfigure
+   it again.
 
 PCI-PCI Bridge properties
 -------------------------
-- 
2.25.1