[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <c5ac3166f35bac3a618b126dabadaddc11c8512d.camel@HansenPartnership.com>
Date: Wed, 10 Jan 2024 15:48:41 -0500
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>, Linus Torvalds
<torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>, linux-kernel
<linux-kernel@...r.kernel.org>
Subject: [GIT PULL] first round of SCSI updates for the 6.7+ merge window
Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Abhinav Singh (1):
scsi: dc395x: Fix warning using plain integer as NULL
Akinobu Mita (1):
scsi: ufs: core: Make fault injection dynamically configurable per HBA
Arnd Bergmann (1):
scsi: mpi3mr: Fix printk() format strings
Artem Chernyshev (2):
scsi: isci: Remove redundant check in isci_task_request_build()
scsi: fnic: Return error if vmalloc() failed
Bao D. Nguyen (1):
scsi: ufs: ufs-qcom: Add support for UFS device version detection
Bart Van Assche (5):
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: core: Warn if the request tag is truncated
scsi: core: Add a precondition check in scsi_eh_scmd_add()
scsi: bfa: Use the proper data type for BLIST flags
Bean Huo (3):
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
Benjamin Coddington (1):
scsi: target: Enable READ CAPACITY for PR EARO
Can Guo (8):
scsi: ufs: ufs-qcom: Check return value of phy_set_mode_ext()
scsi: ufs: ufs-qcom: Set initial PHY gear to max HS gear for HW ver 4 and newer
scsi: ufs: ufs-qcom: Limit HS-G5 Rate-A to hosts with HW version 5
scsi: ufs: ufs-qcom: Allow the first init start with the maximum supported gear
scsi: ufs: ufs-qcom: Setup host power mode during init
scsi: ufs: ufs-qcom: No need to set hs_rate after ufshcd_init_host_param()
scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params
scsi: ufs: ufs-sysfs: Expose UFS power info
Chandrakanth patil (8):
scsi: mpi3mr: Update driver version to 8.5.1.0.0
scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-3
scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2
scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-1
scsi: mpi3mr: Fetch correct device dev handle for status reply descriptor
scsi: mpi3mr: Block PEL Enable Command on Controller Reset and Unrecoverable State
scsi: mpi3mr: Clean up block devices post controller reset
scsi: mpi3mr: Refresh sdev queue depth after controller reset
Hannes Reinecke (3):
scsi: libfc: Map FC_TIMED_OUT to DID_TIME_OUT
scsi: libfc: Fix up timeout error in fc_fcp_rec_error()
scsi: libfc: Don't schedule abort twice
James Seo (12):
scsi: mpt3sas: Replace dynamic allocations with local variables
scsi: mpt3sas: Replace a dynamic allocation with a local variable
scsi: mpt3sas: Fix typo of "TRIGGER"
scsi: mpt3sas: Fix an outdated comment
scsi: mpt3sas: Remove the iounit_pg8 member of the per-adapter struct
scsi: mpt3sas: Use struct_size() for struct size calculations
scsi: mpt3sas: Make MPI26_CONFIG_PAGE_PIOUNIT_1::PhyData[] a flexible array
scsi: mpt3sas: Make MPI2_CONFIG_PAGE_SASIOUNIT_1::PhyData[] a flexible array
scsi: mpt3sas: Make MPI2_CONFIG_PAGE_SASIOUNIT_0::PhyData[] a flexible array
scsi: mpt3sas: Make MPI2_CONFIG_PAGE_RAID_VOL_0::PhysDisk[] a flexible array
scsi: mpt3sas: Make MPI2_CONFIG_PAGE_IO_UNIT_8::Sensor[] a flexible array
scsi: mpt3sas: Use flexible arrays when obviously possible
Justin Stitt (8):
scsi: fcoe: Use sysfs_match_string() over fcoe_parse_mode()
scsi: ibmvscsi: Replace deprecated strncpy() with strscpy()
scsi: ibmvfc: Replace deprecated strncpy() with strscpy()
scsi: elx: libefc: Replace deprecated strncpy() with strscpy_pad()/memcpy()
scsi: csiostor: Replace deprecated strncpy() with strscpy()
scsi: ch: Replace deprecated strncpy() with strscpy()
scsi: bnx2fc: Replace deprecated strncpy() with strscpy()
scsi: 3w-sas: Replace deprecated strncpy() with strscpy()
Justin Tee (13):
scsi: lpfc: Update lpfc version to 14.2.0.17
scsi: lpfc: Move determination of vmid_flag after VMID reinitialization completes
scsi: lpfc: Reinitialize an NPIV's VMID data structures after FDISC
scsi: lpfc: Change VMID driver load time parameters to read only
scsi: lpfc: Copyright updates for 14.2.0.16 patches
scsi: lpfc: Update lpfc version to 14.2.0.16
scsi: lpfc: Enhance driver logging for selected discovery events
scsi: lpfc: Refactor and clean up mailbox command memory free
scsi: lpfc: Return early in lpfc_poll_eratt() when the driver is unloading
scsi: lpfc: Eliminate unnecessary relocking in lpfc_check_nlp_post_devloss()
scsi: lpfc: Fix list_entry null check warning in lpfc_cmpl_els_plogi()
scsi: lpfc: Fix possible file string name overflow when updating firmware
scsi: lpfc: Correct maximum PCI function value for RAS fw logging
Karan Tilak Kumar (13):
scsi: fnic: Increment driver version
scsi: fnic: Improve logs and add support for multiqueue (MQ)
scsi: fnic: Add support for multiqueue (MQ) in fnic driver
scsi: fnic: Add support for multiqueue (MQ) in fnic_main.c
scsi: fnic: Remove usage of host_lock
scsi: fnic: Define stats to track multiqueue (MQ) IOs
scsi: fnic: Modify ISRs to support multiqueue (MQ)
scsi: fnic: Refactor and redefine fnic.h for multiqueue
scsi: fnic: Get copy workqueue count and interrupt mode from config
scsi: fnic: Rename wq_copy to hw_copy_wq
scsi: fnic: Add and improve log messages
scsi: fnic: Add and use fnic number
scsi: fnic: Modify definitions to sync with VIC firmware
Kees Cook (1):
scsi: zfcp: Replace strlcpy() with strscpy()
Manivannan Sadhasivam (18):
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
scsi: ufs: qcom: Remove redundant error print for devm_kzalloc() failure
scsi: ufs: qcom: Check the return value of ufs_qcom_power_up_sequence()
scsi: ufs: qcom: Fail ufs_qcom_power_up_sequence() when core_reset fails
scsi: ufs: qcom: Export ufshcd_{enable/disable}_irq helpers and make use of them
scsi: ufs: qcom: Remove the warning message when core_reset is not available
scsi: ufs: qcom: Remove superfluous variable assignments
scsi: ufs: qcom: Fix the return value when platform_get_resource_byname() fails
scsi: ufs: qcom: Fix the return value of ufs_qcom_ice_program_key()
scsi: ufs: qcom: Use clk_bulk APIs for managing lane clocks
Martin K. Petersen (1):
scsi: ufs: host: Fix kernel-doc warning
Michael Ellerman (1):
scsi: ipr: Remove obsolete check for old CPUs
Nitin Rawat (1):
scsi: ufs: qcom: dt-bindings: Add SC7280 compatible string
Stanley Jhu (1):
scsi: ufs: mediatek: Change the maintainer for MediaTek UFS hooks
Su Hui (3):
scsi: aic7xxx: Return negative error codes in aic7770_probe()
scsi: aic7xxx: Return ahc_linux_register_host()'s value rather than zero
scsi: aic7xxx: Return negative error codes in ahc_linux_register_host()
Sumit Saxena (5):
scsi: mpi3mr: driver version upgrade to 8.5.0.0.50
scsi: mpi3mr: Add support for status reply descriptor
scsi: mpi3mr: Increase maximum number of PHYs to 64 from 32
scsi: mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116
scsi: mpi3mr: Add support for SAS5116 PCI IDs
Tomas Henzl (1):
scsi: mpt3sas: Suppress a warning in debug kernel
Uwe Kleine-König (14):
scsi: sun_esp: Convert to platform remove callback returning void
scsi: sun3x_esp: Convert to platform remove callback returning void
scsi: sun3: Convert to platform remove callback returning void
scsi: sni_53c710: Convert to platform remove callback returning void
scsi: sgiwd93: Convert to platform remove callback returning void
scsi: qlogicpti: Convert to platform remove callback returning void
scsi: mvme16x: Convert to platform remove callback returning void
scsi: mac: Convert to platform remove callback returning void
scsi: mac_esp: Convert to platform remove callback returning void
scsi: jazz_esp: Convert to platform remove callback returning void
scsi: bvme6000: Convert to platform remove callback returning void
scsi: atari: Convert to platform remove callback returning void
scsi: a4000t: Convert to platform remove callback returning void
scsi: a3000: Convert to platform remove callback returning void
Yihang Li (5):
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
Ziqi Chen (1):
scsi: ufs: dt-bindings: Add msi-parent for UFS MCQ
ching Huang (3):
scsi: arcmsr: Update driver version to v1.51.00.14-20230915
scsi: arcmsr: Support new PCI device IDs 1883 and 1886
scsi: arcmsr: Support new RAID controller ARC-1688
And the diffstat:
Documentation/ABI/testing/sysfs-driver-ufs | 56 ++
.../devicetree/bindings/ufs/qcom,ufs.yaml | 2 +
.../devicetree/bindings/ufs/ufs-common.yaml | 2 +
MAINTAINERS | 3 +-
drivers/s390/scsi/zfcp_fc.c | 15 +-
drivers/scsi/3w-sas.c | 3 +-
drivers/scsi/a3000.c | 5 +-
drivers/scsi/a4000t.c | 5 +-
drivers/scsi/aic7xxx/aic7770_osm.c | 6 +-
drivers/scsi/aic7xxx/aic7xxx_osm.c | 2 +-
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c | 3 +-
drivers/scsi/arcmsr/arcmsr.h | 29 +-
drivers/scsi/arcmsr/arcmsr_hba.c | 96 ++-
drivers/scsi/atari_scsi.c | 5 +-
drivers/scsi/bfa/bfad_bsg.c | 2 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 14 +-
drivers/scsi/bvme6000_scsi.c | 6 +-
drivers/scsi/ch.c | 12 +-
drivers/scsi/csiostor/csio_init.c | 3 +-
drivers/scsi/dc395x.c | 2 +-
drivers/scsi/elx/libefc/efc_node.h | 12 +-
drivers/scsi/fcoe/fcoe_sysfs.c | 26 +-
drivers/scsi/fnic/fnic.h | 68 +-
drivers/scsi/fnic/fnic_debugfs.c | 3 +-
drivers/scsi/fnic/fnic_fcs.c | 63 +-
drivers/scsi/fnic/fnic_isr.c | 168 ++--
drivers/scsi/fnic/fnic_main.c | 144 ++--
drivers/scsi/fnic/fnic_res.c | 48 +-
drivers/scsi/fnic/fnic_scsi.c | 868 ++++++++++++---------
drivers/scsi/fnic/fnic_stats.h | 3 +
drivers/scsi/fnic/fnic_trace.c | 11 +
drivers/scsi/fnic/vnic_dev.c | 4 +
drivers/scsi/fnic/vnic_scsi.h | 13 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 11 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 19 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 12 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
drivers/scsi/ipr.c | 55 --
drivers/scsi/isci/request.c | 5 +-
drivers/scsi/isci/request.h | 2 +-
drivers/scsi/isci/task.c | 4 +-
drivers/scsi/jazz_esp.c | 6 +-
drivers/scsi/libfc/fc_fcp.c | 22 +-
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_attr.c | 12 +-
drivers/scsi/lpfc/lpfc_els.c | 67 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 4 +-
drivers/scsi/lpfc/lpfc_mbox.c | 6 +-
drivers/scsi/lpfc/lpfc_mem.c | 47 +-
drivers/scsi/lpfc/lpfc_sli.c | 20 +-
drivers/scsi/lpfc/lpfc_sli.h | 10 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/lpfc/lpfc_vmid.c | 1 +
drivers/scsi/mac_esp.c | 6 +-
drivers/scsi/mac_scsi.c | 5 +-
drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1 +
drivers/scsi/mpi3mr/mpi3mr.h | 33 +-
drivers/scsi/mpi3mr/mpi3mr_app.c | 536 ++++++++++---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 118 ++-
drivers/scsi/mpi3mr/mpi3mr_os.c | 33 +-
drivers/scsi/mpi3mr/mpi3mr_transport.c | 16 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 231 ++----
drivers/scsi/mpt3sas/mpi/mpi2_image.h | 32 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 27 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 35 +-
drivers/scsi/mpt3sas/mpt3sas_base.h | 3 +-
drivers/scsi/mpt3sas/mpt3sas_config.c | 6 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 42 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 56 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 9 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h | 44 +-
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 3 +-
drivers/scsi/mvme16x_scsi.c | 6 +-
drivers/scsi/qlogicpti.c | 6 +-
drivers/scsi/scsi_error.c | 1 +
drivers/scsi/sgiwd93.c | 5 +-
drivers/scsi/sni_53c710.c | 6 +-
drivers/scsi/sun3_scsi.c | 5 +-
drivers/scsi/sun3x_esp.c | 6 +-
drivers/scsi/sun_esp.c | 6 +-
drivers/target/target_core_pr.c | 1 +
drivers/ufs/core/ufs-fault-injection.c | 19 +-
drivers/ufs/core/ufs-fault-injection.h | 13 +-
drivers/ufs/core/ufs-sysfs.c | 151 ++++
drivers/ufs/core/ufshcd.c | 154 +++-
drivers/ufs/host/ufs-exynos.c | 7 +-
drivers/ufs/host/ufs-hisi.c | 11 +-
drivers/ufs/host/ufs-mediatek.c | 12 +-
drivers/ufs/host/ufs-qcom.c | 472 +++--------
drivers/ufs/host/ufs-qcom.h | 57 +-
drivers/ufs/host/ufshcd-pltfrm.c | 69 +-
drivers/ufs/host/ufshcd-pltfrm.h | 10 +-
include/uapi/scsi/scsi_bsg_mpi3mr.h | 2 +
include/ufs/ufs.h | 14 +
include/ufs/ufshcd.h | 12 +-
include/ufs/unipro.h | 4 +-
97 files changed, 2567 insertions(+), 1730 deletions(-)
James
Powered by blists - more mailing lists