linux-kernel - [PATCH v9 2/3] dts: zynqmp: add properties for TCM in remoteproc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240110213504.3626468-3-tanmay.shah@amd.com>
Date: Wed, 10 Jan 2024 13:35:04 -0800
From: Tanmay Shah <tanmay.shah@....com>
To: <andersson@...nel.org>, <mathieu.poirier@...aro.org>,
	<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
	<conor+dt@...nel.org>, <michal.simek@....com>, <ben.levinsky@....com>,
	<tanmay.shah@....com>
CC: <linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v9 2/3] dts: zynqmp: add properties for TCM in remoteproc

Add properties as per new bindings in zynqmp remoteproc node
to represent TCM address and size.

This patch also adds alternative remoteproc node to represent
remoteproc cluster in split mode. By default lockstep mode is
enabled and users should disable it before using split mode
dts. Both device-tree nodes can't be used simultaneously one
of them must be disabled. For zcu102-1.0 and zcu102-1.1 board
remoteproc split mode dts node is enabled and lockstep mode
dts is disabled.

Signed-off-by: Tanmay Shah <tanmay.shah@....com>
---

Changes in v9:
  - fix rproc lockstep dts


 .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts  |  8 +++
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 58 +++++++++++++++++--
 2 files changed, 61 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
index c8f71a1aec89..495ca94b45db 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
@@ -14,6 +14,14 @@ / {
 	compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
 };
 
+&rproc_split {
+	status = "okay";
+};
+
+&rproc_lockstep {
+	status = "disabled";
+};
+
 &eeprom {
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd911..cfdd1f68501f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -247,19 +247,67 @@ fpga_full: fpga-full {
 		ranges;
 	};
 
-	remoteproc {
+	rproc_lockstep: remoteproc@...00000 {
 		compatible = "xlnx,zynqmp-r5fss";
 		xlnx,cluster-mode = <1>;
 
-		r5f-0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x20000>,
+			 <0x0 0x20000 0x0 0xffe20000 0x0 0x20000>;
+
+		r5f@0 {
+			compatible = "xlnx,zynqmp-r5f";
+			reg = <0x0 0x0 0x0 0x20000>, <0x0 0x20000 0x0 0x20000>;
+			reg-names = "atcm", "btcm";
+			power-domains = <&zynqmp_firmware PD_RPU_0>,
+					<&zynqmp_firmware PD_R5_0_ATCM>,
+					<&zynqmp_firmware PD_R5_0_BTCM>;
+			memory-region = <&rproc_0_fw_image>;
+		};
+
+		r5f@1 {
+			compatible = "xlnx,zynqmp-r5f";
+			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+			reg-names = "atcm", "btcm";
+			power-domains = <&zynqmp_firmware PD_RPU_1>,
+					<&zynqmp_firmware PD_R5_1_ATCM>,
+					<&zynqmp_firmware PD_R5_1_BTCM>;
+			memory-region = <&rproc_1_fw_image>;
+		};
+	};
+
+	rproc_split: remoteproc-split@...00000 {
+		status = "disabled";
+		compatible = "xlnx,zynqmp-r5fss";
+		xlnx,cluster-mode = <0>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+			 <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+			 <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+			 <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+		r5f@0 {
 			compatible = "xlnx,zynqmp-r5f";
-			power-domains = <&zynqmp_firmware PD_RPU_0>;
+			reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+			reg-names = "atcm", "btcm";
+			power-domains = <&zynqmp_firmware PD_RPU_0>,
+					<&zynqmp_firmware PD_R5_0_ATCM>,
+					<&zynqmp_firmware PD_R5_0_BTCM>;
 			memory-region = <&rproc_0_fw_image>;
 		};
 
-		r5f-1 {
+		r5f@1 {
 			compatible = "xlnx,zynqmp-r5f";
-			power-domains = <&zynqmp_firmware PD_RPU_1>;
+			reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+			reg-names = "atcm", "btcm";
+			power-domains = <&zynqmp_firmware PD_RPU_1>,
+					<&zynqmp_firmware PD_R5_1_ATCM>,
+					<&zynqmp_firmware PD_R5_1_BTCM>;
 			memory-region = <&rproc_1_fw_image>;
 		};
 	};
-- 
2.25.1