[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMknhBE-1Khe9J-n5WQnH=mFnN0ukiq7=F-SEOU6J-2_u-R0bw@mail.gmail.com>
Date: Thu, 11 Jan 2024 15:32:54 -0600
From: David Lechner <dlechner@...libre.com>
To: Mark Brown <broonie@...nel.org>
Cc: Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
Michael Hennerich <michael.hennerich@...log.com>, Nuno Sá <nuno.sa@...log.com>,
Frank Rowand <frowand.list@...il.com>, Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
Jonathan Corbet <corbet@....net>, linux-spi@...r.kernel.org, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-kernel@...r.kernel.org,
David Jander <david@...tonic.nl>
Subject: Re: [PATCH 01/13] spi: add core support for controllers with offload capabilities
On Thu, Jan 11, 2024 at 2:54 PM David Lechner <dlechner@...libre.com> wrote:
>
> On Wed, Jan 10, 2024 at 3:36 PM Mark Brown <broonie@...nel.org> wrote:
> >
> > On Wed, Jan 10, 2024 at 01:49:42PM -0600, David Lechner wrote:
> > > This adds a feature for specialized SPI controllers that can record
> > > a series of SPI transfers, including tx data, cs assertions, delays,
> > > etc. and then play them back using a hardware trigger without CPU
> > > intervention.
> >
> > > The intended use case for this is with the AXI SPI Engine to capture
> > > data from ADCs at high rates (MSPS) with a stable sample period.
> >
> > > Most of the implementation is controller-specific and will be handled by
> > > drivers that implement the offload_ops callbacks. The API follows a
> > > prepare/enable pattern that should be familiar to users of the clk
> > > subsystem.
> >
> > This is a lot to do in one go, and I think it's a bit too off on the
> > side and unintegrated with the core. There's two very high level bits
> > here, there's the pre-cooking a message for offloading to be executed by
> > a hardware engine and there's the bit where that's triggered by some
> > hardwar event rather than by software.
> >
> > There was a bunch of discussion of the former case with David Jander
>
> I found [1] which appears to be the conversation you are referring to.
> Is that all or is there more that I missed?
>
> [1]: https://lore.kernel.org/linux-spi/20220512163445.6dcca126@erd992/
>
> > (CCed) a while back when he was doing all the work he did on optimising
> > the core for uncontended uses, the thinking there was to have a
> > spi_prepare_message() (or similar) API that drivers could call and then
> > reuse the same transfer repeatedly, and even without any interface for
> > client drivers it's likely that we'd be able to take advantage of it in
> > the core for multi-transfer messages. I'd be surprised if there weren't
> > wins when the message goes over the DMA copybreak size. A much wider
> > range of hardware would be able to do this bit, for example David's case
> > was a Raspberry Pi using the DMA controller to write into the SPI
For those, following along, it looks like the RPi business was
actually a 2013 discussion with Martin Sperl [2]. Both this and [1]
discuss proposed spi_prepare_message() APIs.
[2]: https://lore.kernel.org/linux-spi/CACRpkdb4mn_Hxg=3tuBu89n6eyJ082EETkwtNbzZDFZYTHbVVg@mail.gmail.com/T/#u
Powered by blists - more mailing lists