| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240111081530.GB30988@pendragon.ideasonboard.com>
Date: Thu, 11 Jan 2024 10:15:30 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Julien Stephan <jstephan@...libre.com>
Cc: Louis Kuo <louis.kuo@...iatek.com>,
Phi-Bang Nguyen <pnguyen@...libre.com>,
Andy Hsieh <andy.hsieh@...iatek.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
Florian Sylvestre <fsylvestre@...libre.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-mediatek@...ts.infradead.org, linux-media@...r.kernel.org,
Matthias Brugger <matthias.bgg@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Paul Elder <paul.elder@...asonboard.com>,
Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor
interface
Hi Julien,
Thank you for the patch.
On Wed, Jan 10, 2024 at 03:14:38PM +0100, Julien Stephan wrote:
> From: Louis Kuo <louis.kuo@...iatek.com>
>
> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
> some Mediatek SoC, such as the mt8365
>
> Signed-off-by: Louis Kuo <louis.kuo@...iatek.com>
> Signed-off-by: Phi-Bang Nguyen <pnguyen@...libre.com>
> Signed-off-by: Julien Stephan <jstephan@...libre.com>
> Link: https://lore.kernel.org/r/20230807094940.329165-2-jstephan@baylibre.com
> Signed-off-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> ---
> .../media/mediatek,mt8365-seninf.yaml | 259 ++++++++++++++++++
> MAINTAINERS | 7 +
> 2 files changed, 266 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> new file mode 100644
> index 000000000000..0a7b7d949df7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> @@ -0,0 +1,259 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2023 MediaTek, BayLibre
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Sensor Interface 3.0
> +
> +maintainers:
> + - Laurent Pinchart <laurent.pinchart@...asonboard.com>
> + - Julien Stephan <jstephan@...libre.com>
> + - Andy Hsieh <andy.hsieh@...iatek.com>
> +
> +description:
> + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in
> + multiple MediaTek SoCs. It can support up to three physical CSI-2
> + input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc.
s/soc/SoC/
And while at it, you can reflow the text to 80 columns.
> + On the output side, SENINF can be connected either to CAMSV instance or
> + to the internal ISP. CAMSV is used to bypass the internal ISP processing
> + in order to connect either an external ISP, or a sensor (RAW, YUV).
> +
> +properties:
> + compatible:
> + const: mediatek,mt8365-seninf
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Seninf camsys clock
> + - description: Seninf top mux clock
> +
> + clock-names:
> + items:
> + - const: camsys
> + - const: top_mux
> +
> + phys:
> + minItems: 1
> + maxItems: 4
> + description:
> + phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
> +
> + phy-names:
> + minItems: 1
> + items:
> + - const: csi0
> + - const: csi1
> + - const: csi2
> + - const: csi0b
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI0 or CSI0A port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI1 port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI2 port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI0B port
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> + data-lanes:
> + minItems: 1
> + maxItems: 2
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for cam0
> +
> + port@5:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for cam1
> +
> + port@6:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv0
> +
> + port@7:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv1
> +
> + port@8:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv2
> +
> + port@9:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: connection point for camsv3
> +
> + required:
> + - port@0
> + - port@1
> + - port@2
> + - port@3
> + - port@4
> + - port@5
> + - port@6
> + - port@7
> + - port@8
> + - port@9
> +
> +required:
> + - compatible
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/phy/phy.h>
> + #include <dt-bindings/power/mediatek,mt8365-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + seninf: seninf@...40000 {
> + compatible = "mediatek,mt8365-seninf";
> + reg = <0 0x15040000 0 0x6000>;
> + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&camsys CLK_CAM_SENIF>,
> + <&topckgen CLK_TOP_SENIF_SEL>;
> + clock-names = "camsys", "top_mux";
> +
> + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> +
> + phys = <&mipi_csi0 PHY_TYPE_DPHY>;
> + phy-names = "csi0";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + seninf_in1: endpoint {
> + clock-lanes = <2>;
> + data-lanes = <1 3 0 4>;
> + remote-endpoint = <&isp1_out>;
Indentation issue, you need two more spaces here.
With these small issues fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + };
> +
> + port@3 {
> + reg = <3>;
> + };
> +
> + port@4 {
> + reg = <4>;
> + seninf_camsv1_endpoint: endpoint {
> + remote-endpoint = <&camsv1_endpoint>;
> + };
> + };
> +
> + port@5 {
> + reg = <5>;
> + };
> +
> + port@6 {
> + reg = <6>;
> + };
> +
> + port@7 {
> + reg = <7>;
> + };
> +
> + port@8 {
> + reg = <8>;
> + };
> +
> + port@9 {
> + reg = <9>;
> + };
> +
> + };
> + };
> + };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41e0862cfa7d..4444e719cf8e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13611,6 +13611,13 @@ M: Sean Wang <sean.wang@...iatek.com>
> S: Maintained
> F: drivers/char/hw_random/mtk-rng.c
>
> +MEDIATEK ISP3.0 DRIVER
> +M: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> +M: Julien Stephan <jstephan@...libre.com>
> +M: Andy Hsieh <andy.hsieh@...iatek.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> +
> MEDIATEK SMI DRIVER
> M: Yong Wu <yong.wu@...iatek.com>
> L: linux-mediatek@...ts.infradead.org (moderated for non-subscribers)
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists