| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240111023201.6187-3-changhuang.liang@starfivetech.com>
Date: Wed, 10 Jan 2024 18:32:01 -0800
From: Changhuang Liang <changhuang.liang@...rfivetech.com>
To: Thomas Gleixner <tglx@...utronix.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>
Cc: Ley Foon Tan <leyfoon.tan@...rfivetech.com>,
Jack Zhu <jack.zhu@...rfivetech.com>,
Changhuang Liang <changhuang.liang@...rfivetech.com>,
linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH v1 2/2] irqchip: Add StarFive external interrupt controller
Add StarFive external interrupt controller for JH8100 SoC.
Signed-off-by: Changhuang Liang <changhuang.liang@...rfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@...rfivetech.com>
---
MAINTAINERS | 6 +
drivers/irqchip/Kconfig | 11 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-starfive-jh8100-intc.c | 180 +++++++++++++++++++++
4 files changed, 198 insertions(+)
create mode 100644 drivers/irqchip/irq-starfive-jh8100-intc.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a7c4cf8201e0..b53cc42cd2f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20691,6 +20691,12 @@ F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
F: drivers/phy/starfive/phy-jh7110-pcie.c
F: drivers/phy/starfive/phy-jh7110-usb.c
+STARFIVE JH8100 EXTERNAL INTERRUPT CONTROLLER DRIVER
+M: Changhuang Liang <changhuang.liang@...rfivetech.com>
+S: Supported
+F: Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
+F: drivers/irqchip/irq-starfive-jh8100-intc.c
+
STATIC BRANCH/CALL
M: Peter Zijlstra <peterz@...radead.org>
M: Josh Poimboeuf <jpoimboe@...nel.org>
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index f7149d0f3d45..72c07a12f5e1 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -546,6 +546,17 @@ config SIFIVE_PLIC
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
+config STARFIVE_JH8100_INTC
+ bool "StarFive JH8100 External Interrupt Controller"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ default ARCH_STARFIVE
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ This enables support for the INTC chip found in StarFive JH8100
+ SoC.
+
+ If you don't know what to do here, say Y.
+
config EXYNOS_IRQ_COMBINER
bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index ffd945fe71aa..ec4a18380998 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -96,6 +96,7 @@ obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
+obj-$(CONFIG_STARFIVE_JH8100_INTC) += irq-starfive-jh8100-intc.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
obj-$(CONFIG_IMX_MU_MSI) += irq-imx-mu-msi.o
diff --git a/drivers/irqchip/irq-starfive-jh8100-intc.c b/drivers/irqchip/irq-starfive-jh8100-intc.c
new file mode 100644
index 000000000000..be8224111cf2
--- /dev/null
+++ b/drivers/irqchip/irq-starfive-jh8100-intc.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH8100 External Interrupt Controller driver
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@...rfivetech.com>
+ */
+
+#define pr_fmt(fmt) "irq-starfive-jh8100: " fmt
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/reset.h>
+
+#define STARFIVE_INTC_SRC0_CLEAR 0x10
+#define STARFIVE_INTC_SRC0_MASK 0x14
+#define STARFIVE_INTC_SRC0_INT 0x1c
+
+#define STARFIVE_INTC_SRC_IRQ_NUM 32
+
+struct starfive_irq_chip {
+ void __iomem *base;
+ struct irq_domain *root_domain;
+ struct clk *clk;
+ struct reset_control *rst;
+};
+
+static void starfive_intc_mod(struct starfive_irq_chip *irqc, u32 reg, u32 mask, u32 data)
+{
+ u32 value;
+
+ value = ioread32(irqc->base + reg) & ~mask;
+ data &= mask;
+ data |= value;
+ iowrite32(data, irqc->base + reg);
+}
+
+static void starfive_intc_unmask(struct irq_data *d)
+{
+ struct starfive_irq_chip *irqc = irq_data_get_irq_chip_data(d);
+
+ starfive_intc_mod(irqc, STARFIVE_INTC_SRC0_MASK, BIT(d->hwirq), 0);
+}
+
+static void starfive_intc_mask(struct irq_data *d)
+{
+ struct starfive_irq_chip *irqc = irq_data_get_irq_chip_data(d);
+
+ starfive_intc_mod(irqc, STARFIVE_INTC_SRC0_MASK, BIT(d->hwirq), BIT(d->hwirq));
+}
+
+static struct irq_chip intc_dev = {
+ .name = "starfive jh8100 intc",
+ .irq_unmask = starfive_intc_unmask,
+ .irq_mask = starfive_intc_mask,
+};
+
+static int starfive_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_domain_set_info(d, irq, hwirq, &intc_dev, d->host_data,
+ handle_level_irq, NULL, NULL);
+
+ return 0;
+}
+
+static const struct irq_domain_ops starfive_intc_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = starfive_intc_map,
+};
+
+static void starfive_intc_irq_handler(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct starfive_irq_chip *irqc = irq_data_get_irq_handler_data(&desc->irq_data);
+ unsigned long value = 0;
+ int hwirq;
+
+ chained_irq_enter(chip, desc);
+
+ value = ioread32(irqc->base + STARFIVE_INTC_SRC0_INT);
+ while (value) {
+ hwirq = ffs(value) - 1;
+
+ generic_handle_domain_irq(irqc->root_domain, hwirq);
+
+ starfive_intc_mod(irqc, STARFIVE_INTC_SRC0_CLEAR, BIT(hwirq), BIT(hwirq));
+ starfive_intc_mod(irqc, STARFIVE_INTC_SRC0_CLEAR, BIT(hwirq), 0);
+
+ clear_bit(hwirq, &value);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static int __init starfive_intc_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct starfive_irq_chip *irqc;
+ int ret;
+ int parent_irq;
+
+ irqc = kzalloc(sizeof(*irqc), GFP_KERNEL);
+ if (!irqc)
+ return -ENOMEM;
+
+ irqc->base = of_iomap(intc, 0);
+ if (!irqc->base) {
+ pr_err("Unable to map IC registers\n");
+ ret = -ENXIO;
+ goto err_free;
+ }
+
+ irqc->rst = of_reset_control_get_by_index(intc, 0);
+ if (IS_ERR(irqc->rst)) {
+ pr_err("Unable to get reset control\n");
+ ret = PTR_ERR(irqc->rst);
+ goto err_unmap;
+ }
+
+ irqc->clk = of_clk_get(intc, 0);
+ if (IS_ERR(irqc->clk)) {
+ pr_err("Unable to get clock\n");
+ ret = PTR_ERR(irqc->clk);
+ goto err_rst;
+ }
+
+ ret = reset_control_deassert(irqc->rst);
+ if (ret)
+ goto err_clk;
+
+ ret = clk_prepare_enable(irqc->clk);
+ if (ret)
+ goto err_clk;
+
+ irqc->root_domain = irq_domain_add_linear(intc, STARFIVE_INTC_SRC_IRQ_NUM,
+ &starfive_intc_domain_ops, irqc);
+ if (!irqc->root_domain) {
+ pr_err("Unable to create IRQ domain\n");
+ ret = -EINVAL;
+ goto err_clk;
+ }
+
+ parent_irq = of_irq_get(intc, 0);
+ if (parent_irq < 0) {
+ pr_err("Failed to get main IRQ: %d\n", parent_irq);
+ ret = parent_irq;
+ goto err_clk;
+ }
+
+ irq_set_chained_handler_and_data(parent_irq, starfive_intc_irq_handler, irqc);
+
+ pr_info("Interrupt controller register, nr_irqs %d\n", STARFIVE_INTC_SRC_IRQ_NUM);
+
+ return 0;
+
+err_clk:
+ clk_put(irqc->clk);
+err_rst:
+ reset_control_put(irqc->rst);
+err_unmap:
+ iounmap(irqc->base);
+err_free:
+ kfree(irqc);
+ return ret;
+}
+
+IRQCHIP_PLATFORM_DRIVER_BEGIN(starfive_intc)
+IRQCHIP_MATCH("starfive,jh8100-intc", starfive_intc_init)
+IRQCHIP_PLATFORM_DRIVER_END(starfive_intc)
+
+MODULE_DESCRIPTION("StarFive JH8100 External Interrupt Controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Changhuang Liang <changhuang.liang@...rfivetech.com>");
--
2.25.1
Powered by blists - more mailing lists