[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<MA0P287MB282243605EB9824657607192FE6F2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM>
Date: Fri, 12 Jan 2024 16:27:34 +0800
From: Chen Wang <unicorn_wang@...look.com>
To: Conor Dooley <conor.dooley@...rochip.com>
Cc: Conor Dooley <conor@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Chen Wang <unicornxw@...il.com>, aou@...s.berkeley.edu, chao.wei@...hgo.com,
krzysztof.kozlowski+dt@...aro.org, mturquette@...libre.com,
palmer@...belt.com, paul.walmsley@...ive.com, richardcochran@...il.com,
robh+dt@...nel.org, sboyd@...nel.org, devicetree@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org, haijiao.liu@...hgo.com,
xiaoguang.xing@...hgo.com, guoren@...nel.org, jszhang@...nel.org,
inochiama@...look.com, samuel.holland@...ive.com
Subject: Re: [PATCH v7 2/4] dt-bindings: clock: sophgo: support SG2042
On 2024/1/12 15:42, Conor Dooley wrote:
> On Fri, Jan 12, 2024 at 08:08:15AM +0800, Chen Wang wrote:
>> On 2024/1/12 0:58, Conor Dooley wrote:
>>> On Thu, Jan 11, 2024 at 04:00:04PM +0800, Chen Wang wrote:
>>>> There are four types of clocks for SG2042 and following are where their
>>>> control registers are defined in:
>>>>
>>>> PLL:all in SYS_CTRL
>>>> DIV: all in CLOCK
>>>> GATE: some are in SYS_CTRL, some others are in CLOCK
>>> When you say "some", do you meant some entire clocks are in SYS_CTRL and
>>> some entire clocks are in the CLOCKS? Or do you meant that for a given
>>> clock, some registers are in SYS_CTRL and some are in CLOCK? It's the
>>> first option, right?
>> It's the first option.
> Then the gate clocks that are fully contained within SYS_CTRL are
> outputs of SYS_CTRL and gate clocks fully contained within CLOCK are
> outputs of CLOCK. You should not use a phandle to SYS_CTRL from the
> CLOCKS node so that you can pretend they are part of CLOCKS just because
> that makes writing your driver easier. That said, obviously you can
> share the routines for turning the gates on and off etc.
Um, seems that we need to define two clock-controllers to output their
own clocks respectively. Thank you for your patient guidance, let me
re-cook the code.
Regards,
Chen
> Cheers,
> Conor.
Powered by blists - more mailing lists