| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240112-opp_support-v6-6-77bbf7d0cc37@quicinc.com>
Date: Fri, 12 Jan 2024 19:52:05 +0530
From: Krishna chaitanya chundru <quic_krichai@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
"Lorenzo
Pieralisi" <lpieralisi@...nel.org>,
Krzysztof Wilczyński
<kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Johan Hovold <johan+linaro@...nel.org>,
Brian Masney <bmasney@...hat.com>, Georgi Djakov <djakov@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>, <vireshk@...nel.org>,
<quic_vbadigan@...cinc.com>, <quic_skananth@...cinc.com>,
<quic_nitegupt@...cinc.com>, <linux-pci@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"Krishna
chaitanya chundru" <quic_krichai@...cinc.com>
Subject: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance
state of power domain
QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
maintains hardware state of a regulator by performing max aggregation of
the requests made by all of the processors.
PCIe controller can operate on different RPMh performance state of power
domain based up on the speed of the link. And this performance state varies
from target to target.
It is manadate to scale the performance state based up on the PCIe speed
link operates so that SoC can run under optimum power conditions.
Add Operating Performance Points(OPP) support to vote for RPMh state based
upon GEN speed link is operating.
OPP can handle ICC bw voting also, so move icc bw voting through opp
framework if opp entries are present.
In PCIe certain gen speeds like GEN1x2 & GEN2X1 or GEN3x2 & GEN4x1 use
same icc bw and has frequency, so use frequency based search to reduce
number of entries in the opp table.
Don't initialize icc if opp is supported.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 83 ++++++++++++++++++++++++++++------
1 file changed, 70 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 035953f0b6d8..31512dc9d6ff 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -22,6 +22,7 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pci.h>
+#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/phy/pcie.h>
@@ -244,6 +245,7 @@ struct qcom_pcie {
const struct qcom_pcie_cfg *cfg;
struct dentry *debugfs;
bool suspended;
+ bool opp_supported;
};
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
@@ -1404,16 +1406,14 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
return 0;
}
-static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
+static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
{
struct dw_pcie *pci = pcie->pci;
- u32 offset, status;
+ u32 offset, status, freq;
+ struct dev_pm_opp *opp;
int speed, width;
int ret;
- if (!pcie->icc_mem)
- return;
-
offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
@@ -1424,11 +1424,42 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
- ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
- if (ret) {
- dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
- ret);
+ if (pcie->opp_supported) {
+ switch (speed) {
+ case 1:
+ freq = 2500000;
+ break;
+ case 2:
+ freq = 5000000;
+ break;
+ case 3:
+ freq = 8000000;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ fallthrough;
+ case 4:
+ freq = 16000000;
+ break;
+ }
+
+ opp = dev_pm_opp_find_freq_exact(pci->dev, freq * width, true);
+ if (!IS_ERR(opp)) {
+ ret = dev_pm_opp_set_opp(pci->dev, opp);
+ if (ret)
+ dev_err(pci->dev, "Failed to set opp: freq %ld ret %d\n",
+ dev_pm_opp_get_freq(opp), ret);
+ dev_pm_opp_put(opp);
+ }
+ } else {
+ ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
+ if (ret) {
+ dev_err(pci->dev, "failed to set interconnect bandwidth for pcie-mem: %d\n",
+ ret);
+ }
}
+
+ return;
}
static int qcom_pcie_link_transition_count(struct seq_file *s, void *data)
@@ -1471,8 +1502,10 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
static int qcom_pcie_probe(struct platform_device *pdev)
{
const struct qcom_pcie_cfg *pcie_cfg;
+ unsigned long max_freq = INT_MAX;
struct device *dev = &pdev->dev;
struct qcom_pcie *pcie;
+ struct dev_pm_opp *opp;
struct dw_pcie_rp *pp;
struct resource *res;
struct dw_pcie *pci;
@@ -1539,9 +1572,33 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_pm_runtime_put;
}
- ret = qcom_pcie_icc_init(pcie);
- if (ret)
+ /* OPP table is optional */
+ ret = devm_pm_opp_of_add_table(dev);
+ if (ret && ret != -ENODEV) {
+ dev_err_probe(dev, ret, "Failed to add OPP table\n");
goto err_pm_runtime_put;
+ }
+
+ /* vote for max freq in the opp table if opp table is present */
+ if (ret != -ENODEV) {
+ opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+ if (!IS_ERR(opp)) {
+ ret = dev_pm_opp_set_opp(dev, opp);
+ if (ret)
+ dev_err_probe(pci->dev, ret,
+ "Failed to set opp: freq %ld\n",
+ dev_pm_opp_get_freq(opp));
+ dev_pm_opp_put(opp);
+ }
+ pcie->opp_supported = true;
+ }
+
+ /* Skip icc init if opp is supported as icc bw vote is handled by opp framework */
+ if (!pcie->opp_supported) {
+ ret = qcom_pcie_icc_init(pcie);
+ if (ret)
+ goto err_pm_runtime_put;
+ }
ret = pcie->cfg->ops->get_resources(pcie);
if (ret)
@@ -1561,7 +1618,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_phy_exit;
}
- qcom_pcie_icc_update(pcie);
+ qcom_pcie_icc_opp_update(pcie);
if (pcie->mhi)
qcom_pcie_init_debugfs(pcie);
@@ -1640,7 +1697,7 @@ static int qcom_pcie_resume_noirq(struct device *dev)
pcie->suspended = false;
}
- qcom_pcie_icc_update(pcie);
+ qcom_pcie_icc_opp_update(pcie);
return 0;
}
--
2.42.0
Powered by blists - more mailing lists