[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240112144902.40044-4-dario.binacchi@amarulasolutions.com>
Date: Fri, 12 Jan 2024 15:48:23 +0100
From: Dario Binacchi <dario.binacchi@...rulasolutions.com>
To: linux-kernel@...r.kernel.org
Cc: linux-amarula@...rulasolutions.com,
Lee Jones <lee@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>,
Dario Binacchi <dario.binacchi@...rulasolutions.com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com
Subject: [PATCH v8 3/5] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
In the schematics of document UM2033, the power supply for the micro SD
card is the same 3v3 voltage that is used to power other devices on the
board. By generalizing the name of the voltage regulator, it can be
referenced by other nodes in the device tree without creating
misunderstandings.
This patch is preparatory for future developments.
Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
---
Changes in v8:
- Add Reviewed-by tag of Raphael Gallais-Pou
arch/arm/boot/dts/st/stm32f769-disco.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index 5d12ae25b327..8632bd866272 100644
--- a/arch/arm/boot/dts/st/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -92,9 +92,9 @@ usbotg_hs_phy: usb-phy {
clock-names = "main_clk";
};
- mmc_vcard: mmc_vcard {
+ vcc_3v3: vcc_3v3 {
compatible = "regulator-fixed";
- regulator-name = "mmc_vcard";
+ regulator-name = "vcc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -128,7 +128,7 @@ &rtc {
&sdio2 {
status = "okay";
- vmmc-supply = <&mmc_vcard>;
+ vmmc-supply = <&vcc_3v3>;
cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain", "sleep";
--
2.43.0
Powered by blists - more mailing lists