linux-kernel - Re: [PATCH v8 2/2] PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20240114223132.GA2358466@bhelgaas>
Date: Sun, 14 Jan 2024 16:31:32 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Jim Quinlan <james.quinlan@...adcom.com>
Cc: linux-pci@...r.kernel.org, Nicolas Saenz Julienne <nsaenz@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
	Cyril Brulebois <kibi@...ian.org>,
	Phil Elwell <phil@...pberrypi.com>,
	bcm-kernel-feedback-list@...adcom.com,
	Florian Fainelli <florian.fainelli@...adcom.com>,
	Jim Quinlan <jim2101024@...il.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	Rob Herring <robh@...nel.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@...ts.infradead.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
	open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v8 2/2] PCI: brcmstb: Configure HW CLKREQ# mode
 appropriate for downstream device

On Sun, Jan 14, 2024 at 05:03:43PM -0500, Jim Quinlan wrote:
> On Thu, Jan 11, 2024 at 3:54 PM Bjorn Helgaas <helgaas@...nel.org> wrote:
> > On Thu, Jan 11, 2024 at 01:20:48PM -0500, Jim Quinlan wrote:
> > > On Thu, Jan 11, 2024 at 12:28 PM Bjorn Helgaas <helgaas@...nel.org> wrote:
> > > > On Mon, Nov 13, 2023 at 01:56:06PM -0500, Jim Quinlan wrote:
> ...

> > > > > Note: Since L1 substates are now possible, a modification was made
> > > > > regarding an internal bus timeout: During long periods of the PCIe RC HW
> > > > > being in an L1SS sleep state, there may be a timeout on an internal bus
> > > > > access, even though there may not be any PCIe access involved.  Such a
> > > > > timeout will cause a subsequent CPU abort.
> > > >
> > > > This sounds scary.  If a NIC is put in L1.2, does this mean will we
> > > > see this CPU abort if there's no traffic for a long time?  What is
> > > > needed to avoid the CPU abort?
> > >
> > > I don't think this happens in normal practice as there are a slew
> > > of low-level TLPs and LTR messages that are sent on a regular
> > > basis.
> >
> > OK, I'll have to take your word for this.  I don't know enough about
> > PCIe to know what sort of periodic transmissions are required when a
> > device is idle.
> >
> > LTR messages are required when endpoint service requirements change,
> > but I wouldn't expect those if the device is idle.
> >
> > > The only time this timeout occured is when  a major customer
> > > was doing a hack: IIRC, their endpoint device has to reboot itself
> > > after link-up and driver probe,  so it goes into L1.2 to execute
> > > this to reboot and while doing so the connection is completely
> > > silent.
> >
> > > > What does this mean for users?  L1SS is designed for long periods of
> > > > the device being idle, so this leaves me feeling that using L1SS is
> > > > unsafe in general.  Hopefully this impression is unwarranted, and all
> > > > we need is some clarification here.
> > >
> > > I don't think it will affect most users, if any.
> >
> > I'll try to get this into -next today or tomorrow.
> 
> Bjorn, you are right -- I need to cajole our PCIe HW team to tell me
> why this timeout can never
> happen and/or why it is not a bug.

It'll be good to hear what they have to say.  I will include this
patch in my pull request for v6.8 unless you want me to wait on it.
I hope to send the pull request tomorrow or Tuesday at the latest.

Bjorn