[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240115101056.429471-3-sunilvl@ventanamicro.com>
Date: Mon, 15 Jan 2024 15:40:55 +0530
From: Sunil V L <sunilvl@...tanamicro.com>
To: linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
linux-riscv@...ts.infradead.org
Cc: "Rafael J . Wysocki" <rafael@...nel.org>,
Len Brown <lenb@...nel.org>,
Anup Patel <anup@...infault.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Conor Dooley <conor@...nel.org>,
Andrew Jones <ajones@...tanamicro.com>,
Atish Kumar Patra <atishp@...osinc.com>,
Pavel Machek <pavel@....cz>,
Sunil V L <sunilvl@...tanamicro.com>
Subject: [PATCH v2 -next 2/3] ACPI: RISC-V: Add LPI driver
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.
Signed-off-by: Sunil V L <sunilvl@...tanamicro.com>
---
drivers/acpi/riscv/Makefile | 3 +-
drivers/acpi/riscv/cpuidle.c | 81 ++++++++++++++++++++++++++++++++++++
2 files changed, 83 insertions(+), 1 deletion(-)
create mode 100644 drivers/acpi/riscv/cpuidle.c
diff --git a/drivers/acpi/riscv/Makefile b/drivers/acpi/riscv/Makefile
index 8b3b126e0b94..7309d92dd477 100644
--- a/drivers/acpi/riscv/Makefile
+++ b/drivers/acpi/riscv/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-y += rhct.o
+obj-y += rhct.o
+obj-$(CONFIG_ACPI_PROCESSOR_IDLE) += cpuidle.o
diff --git a/drivers/acpi/riscv/cpuidle.c b/drivers/acpi/riscv/cpuidle.c
new file mode 100644
index 000000000000..052ec3942902
--- /dev/null
+++ b/drivers/acpi/riscv/cpuidle.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024, Ventana Micro Systems Inc
+ * Author: Sunil V L <sunilvl@...tanamicro.com>
+ *
+ */
+
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpuidle.h>
+#include <linux/suspend.h>
+#include <asm/cpuidle.h>
+#include <asm/sbi.h>
+#include <asm/suspend.h>
+
+#define RISCV_FFH_LPI_TYPE_MASK GENMASK_ULL(63, 60)
+#define RISCV_FFH_LPI_RSVD_MASK GENMASK_ULL(59, 32)
+
+#define RISCV_FFH_LPI_TYPE_SBI BIT_ULL(60)
+
+static int acpi_cpu_init_idle(unsigned int cpu)
+{
+ int i;
+ struct acpi_lpi_state *lpi;
+ struct acpi_processor *pr = per_cpu(processors, cpu);
+
+ if (unlikely(!pr || !pr->flags.has_lpi))
+ return -EINVAL;
+
+ if (!is_sbi_hsm_supported())
+ return -ENODEV;
+
+ if (pr->power.count <= 1)
+ return -ENODEV;
+
+ for (i = 1; i < pr->power.count; i++) {
+ u32 state;
+
+ lpi = &pr->power.lpi_states[i];
+
+ /*
+ * Validate Entry Method as per FFH spec.
+ * bits[63:60] should be 0x1
+ * bits[59:32] should be 0x0
+ * bits[31:0] represent a SBI power_state
+ */
+ if (((lpi->address & RISCV_FFH_LPI_TYPE_MASK) != RISCV_FFH_LPI_TYPE_SBI) ||
+ (lpi->address & RISCV_FFH_LPI_RSVD_MASK)) {
+ pr_warn("Invalid LPI entry method %#llx\n", lpi->address);
+ return -EINVAL;
+ }
+
+ state = lpi->address;
+ if (!sbi_suspend_state_is_valid(state)) {
+ pr_warn("Invalid SBI power state %#x\n", state);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+int acpi_processor_ffh_lpi_probe(unsigned int cpu)
+{
+ return acpi_cpu_init_idle(cpu);
+}
+
+int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
+{
+ u32 state = lpi->address;
+
+ if (state & SBI_HSM_SUSP_NON_RET_BIT)
+ return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend,
+ lpi->index,
+ state);
+ else
+ return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(sbi_suspend,
+ lpi->index,
+ state);
+}
--
2.34.1
Powered by blists - more mailing lists