[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e776db0e-2376-415b-8688-f166118d4007@redhat.com>
Date: Mon, 15 Jan 2024 13:38:16 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Andrei Sabalenka <mechakotik@...il.com>, corentin.chary@...il.com,
ilpo.jarvinen@...ux.intel.com, acpi4asus-user@...ts.sourceforge.net,
platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
"Luke D. Jones" <luke@...nes.dev>
Subject: Re: [PATCH] platform/x86: asus-wmi: Re-enable custom fan curves after
setting throttle_thermal_policy
Hi,
On 1/15/24 13:22, Andrei Sabalenka wrote:
> When changing throttle_thermal_policy, all the custom fan curves are getting disabled. This patch re-enables all the custom fan curves that were enabled before changing throttle_thermal_policy.
>
> I believe it makes asus-wmi sysfs interface more convenient, as it allows userspace to manage fan curves independently from platform_profile and throttle_thermal_policy. At the kernel level, custom fan curves should not be tied to "power profiles" scheme in any way, as it gives the user less freedom of controlling them.
Setting a high performance power-profile typically also involves ramping up
the fans harder. So I don't think this patch is a good idea.
If you really want this behavior then you can always re-enable the custom
curve after changing the profile.
Luke, do you have any opinion on this?
Regards,
Hans
>
> Signed-off-by: Andrei Sabalenka <mechakotik@...il.com>
> ---
> drivers/platform/x86/asus-wmi.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index 18be35fdb..c2e38f6d8 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -3441,13 +3441,28 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
> return -EIO;
> }
>
> - /* Must set to disabled if mode is toggled */
> - if (asus->cpu_fan_curve_available)
> - asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false;
> - if (asus->gpu_fan_curve_available)
> - asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false;
> - if (asus->mid_fan_curve_available)
> - asus->custom_fan_curves[FAN_CURVE_DEV_MID].enabled = false;
> + /* Re-enable fan curves after profile change */
> + if (asus->cpu_fan_curve_available && asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled) {
> + err = fan_curve_write(asus, &asus->custom_fan_curves[FAN_CURVE_DEV_CPU]);
> + if (err) {
> + pr_warn("Failed to re-enable CPU fan curve: %d\n", err);
> + return err;
> + }
> + }
> + if (asus->gpu_fan_curve_available && asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled) {
> + err = fan_curve_write(asus, &asus->custom_fan_curves[FAN_CURVE_DEV_GPU]);
> + if (err) {
> + pr_warn("Failed to re-enable GPU fan curve: %d\n", err);
> + return err;
> + }
> + }
> + if (asus->mid_fan_curve_available && asus->custom_fan_curves[FAN_CURVE_DEV_MID].enabled) {
> + err = fan_curve_write(asus, &asus->custom_fan_curves[FAN_CURVE_DEV_MID]);
> + if (err) {
> + pr_warn("Failed to re-enable MID fan curve: %d\n", err);
> + return err;
> + }
> + }
>
> return 0;
> }
Powered by blists - more mailing lists