linux-kernel - [PATCH 03/14] i2c: omap: wakeup the controller during suspend callback

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240102-j7200-pcie-s2r-v1-3-84e55da52400@bootlin.com>
Date: Mon, 15 Jan 2024 17:14:44 +0100
From: Thomas Richard <thomas.richard@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>, 
 Bartosz Golaszewski <brgl@...ev.pl>, Andy Shevchenko <andy@...nel.org>, 
 Tony Lindgren <tony@...mide.com>, 
 Haojian Zhuang <haojian.zhuang@...aro.org>, Vignesh R <vigneshr@...com>, 
 Aaro Koskinen <aaro.koskinen@....fi>, 
 Janusz Krzysztofik <jmkrzyszt@...il.com>, 
 Andi Shyti <andi.shyti@...nel.org>, Peter Rosin <peda@...ntia.se>, 
 Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>, 
 Philipp Zabel <p.zabel@...gutronix.de>, Tom Joseph <tjoseph@...ence.com>, 
 Lorenzo Pieralisi <lpieralisi@...nel.org>, 
 Krzysztof Wilczyński <kw@...ux.com>, 
 Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org, 
 linux-i2c@...r.kernel.org, linux-phy@...ts.infradead.org, 
 linux-pci@...r.kernel.org, gregory.clement@...tlin.com, 
 theo.lebrun@...tlin.com, thomas.petazzoni@...tlin.com, u-kumar1@...com, 
 Thomas Richard <thomas.richard@...tlin.com>
Subject: [PATCH 03/14] i2c: omap: wakeup the controller during suspend
 callback

A device may need the controller up during suspend_noirq or
resume_noirq.
But if the controller is autosuspended, there is no way to wakeup it
during suspend_noirq or resume_noirq because runtime pm is disabled
at this time.

The suspend callback wakes up the controller, so it is available until
its suspend_noirq callback (pm_runtime_force_suspend).
During the resume, it's restored by resume_noirq callback
(pm_runtime_force_resume). Then resume callback enables autosuspend.

So the controller is up during a little time slot in suspend and resume
sequences even if it's not used.

Signed-off-by: Thomas Richard <thomas.richard@...tlin.com>
---
 drivers/i2c/busses/i2c-omap.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 42165ef57946..57f0738fa748 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1575,9 +1575,24 @@ static int __maybe_unused omap_i2c_runtime_resume(struct device *dev)
 	return 0;
 }
 
+
+static int omap_i2c_suspend(struct device *dev)
+{
+	return pm_runtime_resume_and_get(dev);
+}
+
+static int omap_i2c_resume(struct device *dev)
+{
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
 static const struct dev_pm_ops omap_i2c_pm_ops = {
 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
 				      pm_runtime_force_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(omap_i2c_suspend, omap_i2c_resume)
 	SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
 			   omap_i2c_runtime_resume, NULL)
 };

-- 
2.39.2