lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 16 Jan 2024 14:46:05 -0500
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Kang Yang <quic_kangyang@...cinc.com>,
	Jeff Johnson <quic_jjohnson@...cinc.com>,
	Kalle Valo <quic_kvalo@...cinc.com>,
	Sasha Levin <sashal@...nel.org>,
	kvalo@...nel.org,
	ath12k@...ts.infradead.org,
	linux-wireless@...r.kernel.org
Subject: [PATCH AUTOSEL 6.6 039/104] wifi: ath12k: fix and enable AP mode for WCN7850

From: Kang Yang <quic_kangyang@...cinc.com>

[ Upstream commit ed7e818a7b501012038d6bc6fedadaf7375a380a ]

For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again.  Then an
error will return which makes AP mode startup fail.

Kernel log:

[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22

wpa_supplicant log:

Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED

So fix this check and enable AP mode for WCN7850, as now AP mode works normally.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@...cinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@...cinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@...cinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/wireless/ath/ath12k/hw.c  | 3 ++-
 drivers/net/wireless/ath/ath12k/mac.c | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index 5991cc91cd00..c1dcdd849f9d 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -942,7 +942,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.rx_mac_buf_ring = true,
 		.vdev_start_delay = true,
 
-		.interface_modes = BIT(NL80211_IFTYPE_STATION),
+		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
+				   BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
 
 		.idle_ps = true,
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 88346e66bb75..5434883eaf96 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -6196,8 +6196,8 @@ ath12k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	}
 
 	if (ab->hw_params->vdev_start_delay &&
-	    (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
-	    arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) {
+	    arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+	    arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) {
 		param.vdev_id = arvif->vdev_id;
 		param.peer_type = WMI_PEER_TYPE_DEFAULT;
 		param.peer_addr = ar->mac_addr;
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ