| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240116-jz-test-sim-panel-v1-1-f9511f46c9c7@quicinc.com>
Date: Tue, 16 Jan 2024 14:22:04 -0800
From: Jessica Zhang <quic_jesszhan@...cinc.com>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Sam Ravnborg
<sam@...nborg.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>
CC: <quic_abhinavk@...cinc.com>, <linux-kernel@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>
Subject: [PATCH RFC 1/4] drm/panel: add driver for simulated panel
Add a driver for simulating panels. This module also supports a mode
parameter for users to specify a custom mode. If no custom mode is set,
it will fall back to a custom, hard-coded mode.
Signed-off-by: Jessica Zhang <quic_jesszhan@...cinc.com>
---
drivers/gpu/drm/panel/Kconfig | 9 ++
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-simulation.c | 147 +++++++++++++++++++++++++++++++
3 files changed, 157 insertions(+)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 99e14dc212ecb..d711ec170c586 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -107,6 +107,15 @@ config DRM_PANEL_SIMPLE
that it can be automatically turned off when the panel goes into a
low power state.
+config DRM_PANEL_SIMULATION
+ tristate "support for simulation panels"
+ depends on DRM_MIPI_DSI
+ help
+ DRM panel driver for simulated DSI panels. Enabling this config will
+ cause the physical panel driver to not be attached to the DT panel
+ node. After the kernel boots, users can load the module and specify a
+ custom mode using the driver modparams.
+
config DRM_PANEL_EDP
tristate "support for simple Embedded DisplayPort panels"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index d10c3de51c6db..5bc55357714ad 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+obj-$(CONFIG_DRM_PANEL_SIMULATION) += panel-simulation.o
obj-$(CONFIG_DRM_PANEL_EDP) += panel-edp.o
obj-$(CONFIG_DRM_PANEL_EBBG_FT8719) += panel-ebbg-ft8719.o
obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
diff --git a/drivers/gpu/drm/panel/panel-simulation.c b/drivers/gpu/drm/panel/panel-simulation.c
new file mode 100644
index 0000000000000..081c03bea188d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-simulation.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+static char sim_panel_mode[PATH_MAX];
+
+module_param_string(mode, sim_panel_mode, sizeof(sim_panel_mode), 0644);
+MODULE_PARM_DESC(mode, "Sim panel mode");
+
+struct panel_simulation {
+ struct drm_panel base;
+ struct platform_device *platform;
+} *sim_panel;
+
+static struct drm_display_mode panel_simulation_mode = {
+ .clock = 345830,
+ .hdisplay = 1080,
+ .hsync_start = 1175,
+ .hsync_end = 1176,
+ .htotal = 1216,
+ .vdisplay = 2340,
+ .vsync_start = 2365,
+ .vsync_end = 2366,
+ .vtotal = 2370,
+ .width_mm = 0,
+ .height_mm = 0,
+ .type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int panel_simulation_parse_mode(void)
+{
+ int count;
+ struct drm_display_mode user_mode = { 0 };
+ unsigned int vrefresh;
+
+ if (sim_panel_mode[0] == '\0')
+ return 0;
+
+ count = sscanf(sim_panel_mode, "%hu,%hu,%hu,%hu,%hu,%hu,%hu,%hu-%u",
+ &user_mode.hdisplay, &user_mode.hsync_start,
+ &user_mode.hsync_end, &user_mode.htotal,
+ &user_mode.vdisplay, &user_mode.vsync_start,
+ &user_mode.vsync_end, &user_mode.vtotal, &vrefresh);
+
+ if (count != 9)
+ return -EINVAL;
+
+ user_mode.clock = user_mode.htotal * user_mode.vtotal * vrefresh / 1000;
+ memcpy(&panel_simulation_mode, &user_mode, sizeof(struct drm_display_mode));
+
+ return 0;
+}
+
+static int panel_simulation_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+ int ret;
+
+ ret = panel_simulation_parse_mode();
+
+ mode = drm_mode_duplicate(connector->dev, &panel_simulation_mode);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs panel_simulation_funcs = {
+ .get_modes = panel_simulation_get_modes,
+};
+
+static int panel_simulation_probe(struct mipi_dsi_device *dsi)
+{
+ struct panel_simulation *panel;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
+ if (!panel)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, panel);
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ drm_panel_init(&panel->base, dev, &panel_simulation_funcs, DRM_MODE_CONNECTOR_DSI);
+ drm_panel_add(&panel->base);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret)
+ drm_panel_remove(&panel->base);
+
+ return ret;
+}
+
+static void panel_simulation_remove(struct mipi_dsi_device *dsi)
+{
+ struct panel_simulation *panel = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+ drm_panel_remove(&panel->base);
+ drm_panel_disable(&panel->base);
+ drm_panel_unprepare(&panel->base);
+}
+
+static void panel_simulation_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct panel_simulation *panel = dev_get_drvdata(&dsi->dev);
+
+ drm_panel_disable(&panel->base);
+ drm_panel_unprepare(&panel->base);
+}
+
+static struct mipi_dsi_driver panel_simulation_driver = {
+ .driver = {
+ .name = "panel_simulation",
+ },
+ .probe = panel_simulation_probe,
+ .remove = panel_simulation_remove,
+ .shutdown = panel_simulation_shutdown,
+};
+module_mipi_dsi_driver(panel_simulation_driver);
+
+MODULE_AUTHOR("Jessica Zhang <quic_jesszhan@...cinc.com>");
+MODULE_DESCRIPTION("DRM Driver for Simulated Panels");
+MODULE_LICENSE("GPL");
--
2.43.0
Powered by blists - more mailing lists