lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Message-ID: <20240116113939.17339-3-othacehe@gnu.org>
Date: Tue, 16 Jan 2024 12:39:39 +0100
From: Mathieu Othacehe <othacehe@....org>
To: Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>,
	NXP Linux Team <linux-imx@....com>,
	Li Yang <leoyang.li@....com>,
	Stefan Wahren <wahrenst@....net>
Cc: devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Mathieu Othacehe <othacehe@....org>
Subject: [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin

Add DTSI for Phytec i.MX93 System on Module and DTS for Phytec
i.MX93 on Segin evaluation board.

This version comes with:
 - 1GB LPDDR4 RAM
 - external SD
 - debug UART
 - 1x 100Mbit Ethernet

Signed-off-by: Mathieu Othacehe <othacehe@....org>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../dts/freescale/imx93-phycore-segin.dts     | 93 +++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 51 ++++++++++
 3 files changed, 145 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2e027675d7bb..6cb6d9f8783e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
new file mode 100644
index 000000000000..2277d97fc3c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner@...tec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@...il.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phycore-segin",
+		     "phytec,imx93-phycore-som", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 000000000000..7a9ff998a342
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner@...tec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@...il.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+};
-- 
2.41.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ