[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240116144832.GA3862516-robh@kernel.org>
Date: Tue, 16 Jan 2024 08:48:32 -0600
From: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/6] dt-bindings: PCI: qcom,pcie-sm8450: move SM8450 to
dedicated schema
On Mon, Jan 08, 2024 at 03:19:15PM +0100, Krzysztof Kozlowski wrote:
> Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
> to make reviewing easier.
>
> This creates equivalent schema file, except missing required compatible
> which is actually redundant.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
> .../devicetree/bindings/pci/qcom,pcie-sm8450.yaml | 215 +++++++++++++++++++++
> .../devicetree/bindings/pci/qcom,pcie.yaml | 67 -------
> 2 files changed, 215 insertions(+), 67 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
> new file mode 100644
> index 000000000000..59ba809b6204
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
> @@ -0,0 +1,215 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM8450 PCI Express Root Complex
> +
> +maintainers:
> + - Bjorn Andersson <andersson@...nel.org>
> + - Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> +
> +description:
> + Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
> + DesignWare PCIe IP.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,pcie-sm8450-pcie0
> + - qcom,pcie-sm8450-pcie1
> +
> + reg:
> + minItems: 5
> + maxItems: 6
> +
> + reg-names:
> + minItems: 5
> + items:
> + - const: parf # Qualcomm specific registers
> + - const: dbi # DesignWare PCIe registers
> + - const: elbi # External local bus interface registers
> + - const: atu # ATU address space
> + - const: config # PCIe configuration space
> + - const: mhi # MHI registers
> +
> + clocks:
> + minItems: 11
> + maxItems: 12
> +
> + clock-names:
> + minItems: 11
> + maxItems: 12
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + items:
> + - const: pci
> +
> +oneOf:
> + - properties:
> + interrupts:
> + maxItems: 1
> + interrupt-names:
> + items:
> + - const: msi
> +
> + - properties:
> + interrupts:
> + minItems: 8
> + interrupt-names:
> + items:
> + - const: msi0
> + - const: msi1
> + - const: msi2
> + - const: msi3
> + - const: msi4
> + - const: msi5
> + - const: msi6
> + - const: msi7
> +
> +allOf:
> + - $ref: qcom,pcie-common.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,pcie-sm8450-pcie0
> + then:
> + properties:
> + clocks:
> + minItems: 12
> + maxItems: 12
> + clock-names:
> + items:
> + - const: pipe # PIPE clock
> + - const: pipe_mux # PIPE MUX
> + - const: phy_pipe # PIPE output clock
> + - const: ref # REFERENCE clock
> + - const: aux # Auxiliary clock
> + - const: cfg # Configuration clock
> + - const: bus_master # Master AXI clock
> + - const: bus_slave # Slave AXI clock
> + - const: slave_q2a # Slave Q2A clock
> + - const: ddrss_sf_tbu # PCIe SF TBU clock
> + - const: aggre0 # Aggre NoC PCIe0 AXI clock
> + - const: aggre1 # Aggre NoC PCIe1 AXI clock
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,pcie-sm8450-pcie1
> + then:
> + properties:
> + clocks:
> + minItems: 11
> + maxItems: 11
> + clock-names:
> + items:
> + - const: pipe # PIPE clock
> + - const: pipe_mux # PIPE MUX
> + - const: phy_pipe # PIPE output clock
> + - const: ref # REFERENCE clock
> + - const: aux # Auxiliary clock
> + - const: cfg # Configuration clock
> + - const: bus_master # Master AXI clock
> + - const: bus_slave # Slave AXI clock
> + - const: slave_q2a # Slave Q2A clock
> + - const: ddrss_sf_tbu # PCIe SF TBU clock
> + - const: aggre1 # Aggre NoC PCIe1 AXI clock
Almost the same list. Combine them and just make the 11th entry "enum:
[aggre0, aggre1]".
Rob
Powered by blists - more mailing lists