lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240117225009.2931699-1-Frank.Li@nxp.com>
Date: Wed, 17 Jan 2024 17:50:09 -0500
From: Frank Li <Frank.Li@....com>
To: imx@...ts.linux.dev,
	Miquel Raynal <miquel.raynal@...tlin.com>,
	Conor Culhane <conor.culhane@...vaco.com>,
	Alexandre Belloni <alexandre.belloni@...tlin.com>,
	linux-i3c@...ts.infradead.org (moderated list:SILVACO I3C DUAL-ROLE MASTER),
	linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 1/1] i3c: master: svc: add support for read len bigger than 255

RDTERM is 8bit. Only support max 255 read transfer for auto terminate. Use
manual terminate when read len bigger than 255.

When left data length is FIFO size + 1, issue terminate
(RDTERM(1) | REQUEST_NONE). So hardware will stop fetch data after next
data.
	│ ◄──────────  buff length     ────────►│
	│                                       │
	│                       ┌─┬─────────────┤
	│                       │ │  FIFO SIZE  │
	│                       └─┴─────────────┘
	                        ▲
	                        │
	                  Wait FIFO Full and Issue read termniate here!!

Signed-off-by: Frank Li <Frank.Li@....com>
---
 drivers/i3c/master/svc-i3c-master.c | 76 ++++++++++++++++++++++++-----
 1 file changed, 64 insertions(+), 12 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 5ee4db68988e2..58047ad357791 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -977,7 +977,7 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
 }
 
 static int svc_i3c_master_read(struct svc_i3c_master *master,
-			       u8 *in, unsigned int len)
+			       u8 *in, unsigned int len, bool auto_term)
 {
 	int offset = 0, i;
 	u32 mdctrl, mstatus;
@@ -995,16 +995,60 @@ static int svc_i3c_master_read(struct svc_i3c_master *master,
 			return -ETIMEDOUT;
 		}
 
-		mdctrl = readl(master->regs + SVC_I3C_MDATACTRL);
-		count = SVC_I3C_MDATACTRL_RXCOUNT(mdctrl);
-		if (offset + count > len) {
-			dev_err(master->dev, "I3C receive length too long!\n");
-			return -EINVAL;
-		}
-		for (i = 0; i < count; i++)
-			in[offset + i] = readl(master->regs + SVC_I3C_MRDATAB);
+		if (auto_term || completed) {
+			/* auto termate or early termate by target */
+			mdctrl = readl(master->regs + SVC_I3C_MDATACTRL);
+			count = SVC_I3C_MDATACTRL_RXCOUNT(mdctrl);
+			if (offset + count > len) {
+				dev_err(master->dev, "I3C receive length too long!\n");
+				return -EINVAL;
+			}
+			for (i = 0; i < count; i++)
+				in[offset + i] = readl(master->regs + SVC_I3C_MRDATAB);
+
+			offset += count;
 
-		offset += count;
+		} else {
+			/*
+			 * Controller will fill whole RX FIFO in manual mode. FIFO full can prevent
+			 * controller continue fetch data from target.
+			 *
+			 * When left data length is FIFO size + 1, issue terminate
+			 * (RDTERM(1) | REQUEST_NONE). So hardware will stop fetch data after next
+			 * data.
+			 *
+			 * │ ◄──────────  buff length     ────────►│
+			 * │                                       │
+			 * │                       ┌─┬─────────────┤
+			 * │                       │ │  FIFO SIZE  │
+			 * │                       └─┴─────────────┘
+			 *                         ▲
+			 *                         │
+			 *                         Wait FIFO Full and Issue read termniate here!!
+			 */
+			mdctrl = readl_relaxed(master->regs + SVC_I3C_MDATACTRL);
+			count = SVC_I3C_MDATACTRL_RXCOUNT(mdctrl);
+
+			if (offset + count + SVC_I3C_FIFO_SIZE < len) {
+				for (i = 0; i < count; i++) {
+					in[offset] = readl_relaxed(master->regs + SVC_I3C_MRDATAB);
+					offset++;
+				}
+			} else {
+				if (count != SVC_I3C_FIFO_SIZE)
+					continue;
+
+				/* Issue manual read terminate at next data */
+				if (offset + SVC_I3C_FIFO_SIZE == len - 1)
+					writel_relaxed(SVC_I3C_MCTRL_REQUEST_NONE |
+						       SVC_I3C_MCTRL_DIR(1) |
+						       SVC_I3C_MCTRL_RDTERM(1),
+						       master->regs + SVC_I3C_MCTRL);
+
+				in[offset] = readl_relaxed(master->regs + SVC_I3C_MRDATAB);
+				offset++;
+			}
+		}
 	}
 
 	return offset;
@@ -1042,9 +1086,17 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 			       u8 *in, const u8 *out, unsigned int xfer_len,
 			       unsigned int *actual_len, bool continued)
 {
+	int rdterm = 0;
 	u32 reg;
 	int ret;
 
+	if (rnw)
+		rdterm = xfer_len;
+
+	/* If read length > max RDTERM in MCTRL, using manual terminate */
+	if (xfer_len > 255)
+		rdterm = 0;
+
 	/* clean SVC_I3C_MINT_IBIWON w1c bits */
 	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
 
@@ -1053,7 +1105,7 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 	       SVC_I3C_MCTRL_IBIRESP_NACK |
 	       SVC_I3C_MCTRL_DIR(rnw) |
 	       SVC_I3C_MCTRL_ADDR(addr) |
-	       SVC_I3C_MCTRL_RDTERM(*actual_len),
+	       SVC_I3C_MCTRL_RDTERM(rdterm),
 	       master->regs + SVC_I3C_MCTRL);
 
 	ret = readl_poll_timeout(master->regs + SVC_I3C_MSTATUS, reg,
@@ -1086,7 +1138,7 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 	}
 
 	if (rnw)
-		ret = svc_i3c_master_read(master, in, xfer_len);
+		ret = svc_i3c_master_read(master, in, xfer_len, !!rdterm);
 	else
 		ret = svc_i3c_master_write(master, out, xfer_len);
 	if (ret < 0)
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ