[ 0.057945] ... fixed-purpose events: 3 [ 0.057945] ... event mask: 000000070000000f [ 0.057945] signal: max sigframe size: 2032 [ 0.057945] Estimated ratio of average max frequency by base frequency (times 1024): 1235 [ 0.057945] rcu: Hierarchical SRCU implementation. [ 0.057945] rcu: Max phase no-delay instances is 1000. [ 0.057945] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.057945] smp: Bringing up secondary CPUs ... [ 0.057945] smpboot: x86: Booting SMP configuration: [ 0.057945] .... node #0, CPUs: #1 #2 #3 [ 0.057945] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.057945] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.057945] smp: Brought up 1 node, 4 CPUs [ 0.057945] smpboot: Max logical packages: 1 [ 0.057945] smpboot: Total of 4 processors activated (23199.08 BogoMIPS) [ 0.078486] node 0 deferred pages initialised in 20ms [ 0.078486] devtmpfs: initialized [ 0.078486] x86/mm: Memory block size: 128MB [ 0.082053] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes) [ 0.082053] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes) [ 0.084497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.084504] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.084546] pinctrl core: initialized pinctrl subsystem [ 0.085033] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.085249] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.085364] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.085476] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.085509] audit: initializing netlink subsys (disabled) [ 0.085525] audit: type=2000 audit(1705477361.028:1): state=initialized audit_enabled=0 res=1 [ 0.085525] thermal_sys: Registered thermal governor 'fair_share' [ 0.085525] thermal_sys: Registered thermal governor 'bang_bang' [ 0.085525] thermal_sys: Registered thermal governor 'step_wise' [ 0.085525] thermal_sys: Registered thermal governor 'user_space' [ 0.085525] thermal_sys: Registered thermal governor 'power_allocator' [ 0.085525] cpuidle: using governor ladder [ 0.085525] cpuidle: using governor menu [ 0.085525] Simple Boot Flag at 0x47 set to 0x80 [ 0.085525] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.085525] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.085982] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.085986] PCI: not using MMCONFIG [ 0.085987] PCI: Using configuration type 1 for base access [ 0.086146] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.086152] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.086152] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.086152] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.086152] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.086152] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.086199] ACPI: Added _OSI(Module Device) [ 0.086199] ACPI: Added _OSI(Processor Device) [ 0.086199] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.086199] ACPI: Added _OSI(Processor Aggregator Device) [ 0.119600] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.124152] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.128477] ACPI: Dynamic OEM Table Load: [ 0.128477] ACPI: SSDT 0xFFFFA07C816D6800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.130163] ACPI: Dynamic OEM Table Load: [ 0.130168] ACPI: SSDT 0xFFFFA07C81755000 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.131732] ACPI: Dynamic OEM Table Load: [ 0.131737] ACPI: SSDT 0xFFFFA07C81750000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.132901] ACPI: Dynamic OEM Table Load: [ 0.132905] ACPI: SSDT 0xFFFFA07C81710200 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.135146] ACPI: _OSC evaluated successfully for all CPUs [ 0.135272] ACPI: EC: EC started [ 0.135273] ACPI: EC: interrupt blocked [ 0.139853] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.139855] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.139856] ACPI: Interpreter enabled [ 0.139892] ACPI: PM: (supports S0 S3 S4 S5) [ 0.139893] ACPI: Using IOAPIC for interrupt routing [ 0.139926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140616] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.140625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.140626] PCI: Using E820 reservations for host bridge windows [ 0.141107] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.144452] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 0.144706] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 0.146048] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 0.146301] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 0.146546] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 0.146792] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.147392] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 0.147640] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.147889] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 0.148136] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 0.148388] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 0.148634] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 0.148880] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.149125] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 0.149373] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 0.149621] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 0.149868] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 0.150897] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 0.151146] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.151396] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 0.166659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.166665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.166810] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.167077] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 0.167079] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.167869] PCI host bridge to bus 0000:00 [ 0.167871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.167873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.167875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.167876] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window] [ 0.167878] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.167879] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.167896] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 [ 0.167962] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 [ 0.167969] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit] [ 0.167975] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.167978] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.167990] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.168001] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.168130] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.168138] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit] [ 0.168379] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.168393] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit] [ 0.168449] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.168890] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.168904] pci 0000:00:14.2: reg 0x10: [mem 0xdc334000-0xdc334fff 64bit] [ 0.169042] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.169072] pci 0000:00:15.0: reg 0x10: [mem 0xdc333000-0xdc333fff 64bit] [ 0.169401] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.169442] pci 0000:00:15.1: reg 0x10: [mem 0xdc332000-0xdc332fff 64bit] [ 0.169753] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.169765] pci 0000:00:16.0: reg 0x10: [mem 0xdc331000-0xdc331fff 64bit] [ 0.169809] pci 0000:00:16.0: PME# supported from D3hot [ 0.170098] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.170138] pci 0000:00:1c.0: broken device, retraining non-functional downstream link at 2.5GT/s [ 1.177947] pci 0000:00:1c.0: retraining failed [ 1.177984] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.178003] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 1.178481] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 1.178566] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.178587] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 1.179061] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 1.179134] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.179152] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 1.179626] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 [ 1.179963] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 1.179976] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff] [ 1.180224] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 1.180244] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit] [ 1.180270] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit] [ 1.180316] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 1.180976] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 1.181035] pci 0000:00:1f.4: reg 0x10: [mem 0xdc330000-0xdc3300ff 64bit] [ 1.181107] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 1.181458] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 1.181463] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 1.181468] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 1.181900] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 [ 1.182057] pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit] [ 1.183369] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 1.184966] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 1.184970] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 1.185046] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802 [ 1.185066] pci 0000:3b:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit] [ 1.185172] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot [ 1.185491] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 1.185495] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 1.188150] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.188150] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.188150] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.188150] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.188150] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 1.188150] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 1.188150] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.188150] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.198237] ACPI: EC: interrupt unblocked [ 1.198239] ACPI: EC: event unblocked [ 1.198244] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 1.198245] ACPI: EC: GPE=0x14 [ 1.198247] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 1.198249] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 1.198324] iommu: Default domain type: Translated [ 1.198324] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.198324] pps_core: LinuxPPS API ver. 1 registered [ 1.198324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.198324] PTP clock support registered [ 1.198324] EDAC MC: Ver: 3.0.0 [ 1.198772] efivars: Registered efivars operations [ 1.198772] NetLabel: Initializing [ 1.198772] NetLabel: domain hash size = 128 [ 1.198772] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.198772] NetLabel: unlabeled traffic allowed by default [ 1.198772] PCI: Using ACPI for IRQ routing [ 1.224539] PCI: pci_cache_line_size set to 64 bytes [ 1.224923] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 1.224925] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.224926] e820: reserve RAM buffer [mem 0x4ea13018-0x4fffffff] [ 1.224927] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff] [ 1.224928] e820: reserve RAM buffer [mem 0x62264000-0x63ffffff] [ 1.224929] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff] [ 1.224930] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff] [ 1.224931] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff] [ 1.224965] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.224965] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.224965] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.224965] vgaarb: loaded [ 1.224965] clocksource: Switched to clocksource tsc-early [ 1.224965] VFS: Disk quotas dquot_6.6.0 [ 1.224965] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.224965] AppArmor: AppArmor Filesystem Enabled [ 1.224965] pnp: PnP ACPI init [ 1.224965] system 00:00: [io 0x0680-0x069f] has been reserved [ 1.224965] system 00:00: [io 0xffff] has been reserved [ 1.224965] system 00:00: [io 0xffff] has been reserved [ 1.224965] system 00:00: [io 0xffff] has been reserved [ 1.224965] system 00:00: [io 0x1800-0x18fe] has been reserved [ 1.224965] system 00:00: [io 0x164e-0x164f] has been reserved [ 1.224965] system 00:02: [io 0x1854-0x1857] has been reserved [ 1.224965] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.224965] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.224965] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.224965] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.224965] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.224965] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.224965] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.224965] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 1.224965] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.224965] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 1.224965] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 1.224965] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 1.224965] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 1.224965] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 1.224965] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 1.224965] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 1.224965] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 1.224965] system 00:07: [io 0xff00-0xfffe] has been reserved [ 1.224965] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 1.224965] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 1.227111] pnp: PnP ACPI: found 9 devices [ 1.232790] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.232843] NET: Registered PF_INET protocol family [ 1.232964] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.235256] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.235277] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.235337] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.235520] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.235709] TCP: Hash tables configured (established 131072 bind 65536) [ 1.235774] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 1.235824] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.235855] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.235907] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.235913] NET: Registered PF_XDP protocol family [ 1.235920] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 1.235929] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.235932] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 1.235935] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.235938] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 1.235941] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 1.235945] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 1.235949] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 1.235956] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 1.235959] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 1.235964] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.235966] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.235967] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 1.235969] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window] [ 1.235970] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 1.235971] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.235973] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 1.235974] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 1.235976] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff] [ 1.235981] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff] [ 1.236555] PCI: CLS 0 bytes, default 64 [ 1.236566] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0 [ 1.236569] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1 [ 1.236578] DMAR: No ATSR found [ 1.236579] DMAR: No SATC found [ 1.236580] DMAR: IOMMU feature fl1gp_support inconsistent [ 1.236581] DMAR: IOMMU feature pgsel_inv inconsistent [ 1.236582] DMAR: IOMMU feature nwfs inconsistent [ 1.236583] DMAR: IOMMU feature pasid inconsistent [ 1.236584] DMAR: IOMMU feature eafs inconsistent [ 1.236585] DMAR: IOMMU feature prs inconsistent [ 1.236585] DMAR: IOMMU feature nest inconsistent [ 1.236586] DMAR: IOMMU feature mts inconsistent [ 1.236587] DMAR: IOMMU feature sc_support inconsistent [ 1.236587] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 1.236589] DMAR: dmar0: Using Queued invalidation [ 1.236592] DMAR: dmar1: Using Queued invalidation [ 1.236623] Trying to unpack rootfs image as initramfs... [ 1.236887] pci 0000:00:02.0: Adding to iommu group 0 [ 1.236929] pci 0000:00:00.0: Adding to iommu group 1 [ 1.236939] pci 0000:00:04.0: Adding to iommu group 2 [ 1.236954] pci 0000:00:14.0: Adding to iommu group 3 [ 1.236962] pci 0000:00:14.2: Adding to iommu group 3 [ 1.236976] pci 0000:00:15.0: Adding to iommu group 4 [ 1.236989] pci 0000:00:15.1: Adding to iommu group 4 [ 1.237002] pci 0000:00:16.0: Adding to iommu group 5 [ 1.237015] pci 0000:00:1c.0: Adding to iommu group 6 [ 1.237026] pci 0000:00:1c.4: Adding to iommu group 7 [ 1.237037] pci 0000:00:1d.0: Adding to iommu group 8 [ 1.237056] pci 0000:00:1f.0: Adding to iommu group 9 [ 1.237065] pci 0000:00:1f.2: Adding to iommu group 9 [ 1.237074] pci 0000:00:1f.3: Adding to iommu group 9 [ 1.237083] pci 0000:00:1f.4: Adding to iommu group 9 [ 1.237094] pci 0000:3a:00.0: Adding to iommu group 10 [ 1.237105] pci 0000:3b:00.0: Adding to iommu group 11 [ 1.237980] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.237983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.237984] software IO TLB: mapped [mem 0x000000005e264000-0x0000000062264000] (64MB) [ 1.238089] sgx: EPC section 0x70200000-0x75f7ffff [ 1.238894] Initialise system trusted keyrings [ 1.238904] Key type blacklist registered [ 1.238978] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.239003] zbud: loaded [ 1.239243] fuse: init (API version 7.39) [ 1.239520] integrity: Platform Keyring initialized [ 1.239530] integrity: Machine keyring initialized [ 1.239533] Key type asymmetric registered [ 1.239536] Asymmetric key parser 'x509' registered [ 1.369406] Freeing initrd memory: 60468K [ 1.373450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.373488] io scheduler mq-deadline registered [ 1.374630] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.374655] efifb: probing for efifb [ 1.374671] efifb: framebuffer at 0x90000000, using 22500k, total 22500k [ 1.374672] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 1.374674] efifb: scrolling: redraw [ 1.374674] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.374758] Console: switching to colour frame buffer device 200x56 [ 1.378244] fb0: EFI VGA frame buffer device [ 1.380312] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.380314] ACPI: thermal: Thermal Zone [THM] (25 C) [ 1.380481] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.381100] hpet_acpi_add: no address or irqs in _CRS [ 1.381119] Linux agpgart interface v0.103 [ 1.393500] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4) [ 1.435071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.435409] i8042: Warning: Keylock active [ 1.437624] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.437631] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.437785] mousedev: PS/2 mouse device common for all mice [ 1.437810] rtc_cmos 00:01: RTC can wake from S4 [ 1.438536] rtc_cmos 00:01: registered as rtc0 [ 1.438679] rtc_cmos 00:01: setting system clock to 2024-01-17T07:42:42 UTC (1705477362) [ 1.438706] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 1.438840] intel_pstate: Intel P-state driver initializing [ 1.439016] intel_pstate: HWP enabled [ 1.439207] ledtrig-cpu: registered to indicate activity on CPUs [ 1.439743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.454996] NET: Registered PF_INET6 protocol family [ 1.460695] Segment Routing with IPv6 [ 1.460709] In-situ OAM (IOAM) with IPv6 [ 1.460741] mip6: Mobile IPv6 [ 1.460746] NET: Registered PF_PACKET protocol family [ 1.460814] mpls_gso: MPLS GSO support [ 1.461185] microcode: Current revision: 0x000000f4 [ 1.461187] microcode: Updated early from: 0x000000f0 [ 1.461375] IPI shorthand broadcast: enabled [ 1.462832] sched_clock: Marking stable (1456002483, 5993138)->(1496650333, -34654712) [ 1.463013] registered taskstats version 1 [ 1.463094] Loading compiled-in X.509 certificates [ 1.481091] Loaded X.509 cert 'Build time autogenerated kernel key: 45375d97a88689d31f3746ef65fc2b509cef42c6' [ 1.482720] Key type .fscrypt registered [ 1.482721] Key type fscrypt-provisioning registered [ 1.489056] cryptd: max_cpu_qlen set to 1000 [ 1.495250] AVX2 version of gcm_enc/dec engaged. [ 1.495276] AES CTR mode by8 optimization enabled [ 1.519129] Key type encrypted registered [ 1.519139] AppArmor: AppArmor sha1 policy hashing enabled [ 1.519373] integrity: Loading X.509 certificate: UEFI:db [ 1.519392] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' [ 1.519394] integrity: Loading X.509 certificate: UEFI:db [ 1.519413] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.519414] integrity: Loading X.509 certificate: UEFI:db [ 1.519428] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.519728] ima: Allocated hash algorithm: sha256 [ 1.562278] ima: No architecture policies found [ 1.562304] evm: Initialising EVM extended attributes: [ 1.562306] evm: security.selinux [ 1.562307] evm: security.SMACK64 (disabled) [ 1.562308] evm: security.SMACK64EXEC (disabled) [ 1.562309] evm: security.SMACK64TRANSMUTE (disabled) [ 1.562310] evm: security.SMACK64MMAP (disabled) [ 1.562311] evm: security.apparmor [ 1.562312] evm: security.ima [ 1.562312] evm: security.capability [ 1.562313] evm: HMAC attrs: 0x1 [ 1.673170] RAS: Correctable Errors collector initialized. [ 1.673231] clk: Disabling unused clocks [ 1.674070] Freeing unused decrypted memory: 2028K [ 1.674505] Freeing unused kernel image (initmem) memory: 3992K [ 1.690259] Write protecting the kernel read-only data: 28672k [ 1.690837] Freeing unused kernel image (rodata/data gap) memory: 1636K [ 1.734806] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.734808] x86/mm: Checking user space page tables [ 1.776965] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.776970] Run /init as init process [ 1.776971] with arguments: [ 1.776972] /init [ 1.776973] with environment: [ 1.776973] HOME=/ [ 1.776974] TERM=linux [ 1.776975] BOOT_IMAGE=/vmlinuz-6.7-amd64 [ 1.956723] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found [ 1.971582] hid: raw HID events driver (C) Jiri Kosina [ 1.995425] ACPI: bus type USB registered [ 1.995563] usbcore: registered new interface driver usbfs [ 1.995604] usbcore: registered new interface driver hub [ 1.995623] usbcore: registered new device driver usb [ 2.006038] ACPI: battery: Slot [BAT0] (battery present) [ 2.010057] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 2.010097] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 2.010163] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 [ 2.010222] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] [ 2.010452] pci 0000:00:1f.1: Adding to iommu group 12 [ 2.011872] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 2.012107] platform idma64.0: Adding to iommu group 12 [ 2.012212] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.012684] platform i2c_designware.0: Adding to iommu group 13 [ 2.030137] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 2.030401] platform idma64.1: Adding to iommu group 14 [ 2.030529] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.030555] platform i2c_designware.1: Adding to iommu group 15 [ 2.034268] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 2.055847] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.055856] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.056152] ACPI: bus type drm_connector registered [ 2.057008] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 2.057424] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.057429] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.057433] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.057770] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 2.057774] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.057776] usb usb1: Product: xHCI Host Controller [ 2.057778] usb usb1: Manufacturer: Linux 6.7-amd64 xhci-hcd [ 2.057779] usb usb1: SerialNumber: 0000:00:14.0 [ 2.059335] hub 1-0:1.0: USB hub found [ 2.059352] hub 1-0:1.0: 12 ports detected [ 2.061634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 2.061638] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.061640] usb usb2: Product: xHCI Host Controller [ 2.061642] usb usb2: Manufacturer: Linux 6.7-amd64 xhci-hcd [ 2.061643] usb usb2: SerialNumber: 0000:00:14.0 [ 2.061759] hub 2-0:1.0: USB hub found [ 2.061772] hub 2-0:1.0: 6 ports detected [ 2.062232] usb: port power management may be unreliable [ 2.227988] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2 [ 2.228309] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3 [ 2.228631] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 2.258046] tsc: Refined TSC clocksource calibration: 2904.009 MHz [ 2.258067] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0e73964, max_idle_ns: 440795294805 ns [ 2.260546] clocksource: Switched to clocksource tsc [ 2.273083] nvme nvme0: pci function 0000:3b:00.0 [ 2.291694] nvme nvme0: 4/0/0 default/read/poll queues [ 2.298899] nvme0n1: p1 p2 p3 p4 [ 2.318236] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 2.468183] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01 [ 2.468201] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.598243] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 2.748907] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11 [ 2.748929] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 2.748939] usb 1-4: Product: Touchscreen [ 2.748946] usb 1-4: Manufacturer: ELAN [ 2.878274] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 3.087363] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26 [ 3.087384] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3.087394] usb 1-5: Product: Integrated_Webcam_HD [ 3.087401] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01 [ 3.116367] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input5 [ 3.116445] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input6 [ 3.116468] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input7 [ 3.116564] hid-generic 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 3.116608] usbcore: registered new interface driver usbhid [ 3.116610] usbhid: USB HID core driver [ 3.149280] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 3.149331] device-mapper: uevent: version 1.0.3 [ 3.149453] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 55.847456] PM: Image not found (code -22) [ 55.989997] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none. [ 56.034263] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 56.138065] systemd[1]: Inserted module 'autofs4' [ 56.185281] systemd[1]: systemd 255.2-4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 56.185311] systemd[1]: Detected architecture x86-64. [ 56.187070] systemd[1]: Hostname set to . [ 56.376359] systemd[1]: Queued start job for default target graphical.target. [ 56.415311] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 56.415894] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 56.416415] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice. [ 56.416930] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 56.417260] systemd[1]: Created slice user.slice - User and Session Slice. [ 56.417358] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 56.417437] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 56.417699] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 56.417733] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4... [ 56.417746] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8... [ 56.417760] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5... [ 56.417771] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653... [ 56.417823] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 56.417867] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 56.417893] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 56.417924] systemd[1]: Reached target slices.target - Slice Units. [ 56.417984] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 56.419559] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 56.419691] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 56.419765] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 56.419916] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 56.420082] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 56.420125] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 56.420504] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 56.420645] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 56.422100] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 56.423384] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 56.424968] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 56.430185] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 56.434610] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 56.438858] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 56.441228] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 56.444644] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 56.447411] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 56.454228] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 56.456800] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 56.462247] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 56.462389] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 56.466205] pstore: Using crash dump compression: deflate [ 56.466301] systemd[1]: Starting systemd-journald.service - Journal Service... [ 56.473974] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 56.474172] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 56.474577] pstore: Registered efi_pstore as persistent store backend [ 56.478210] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 56.478315] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 56.482259] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 56.484781] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 56.484944] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 56.485072] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 56.485210] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 56.485634] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 56.486015] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 56.486418] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 56.486496] loop: module loaded [ 56.486618] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 56.487068] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 56.487246] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 56.487703] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 56.487884] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 56.488254] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 56.488432] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 56.488833] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 56.489016] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 56.489406] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 56.489593] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 56.494142] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 56.496963] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 56.497045] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 56.498823] systemd-journald[431]: Collecting audit messages is disabled. [ 56.498897] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 56.502528] lp: driver loaded but no devices found [ 56.506413] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 56.508606] ppdev: user-space parallel port driver [ 56.509572] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 56.523488] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none. [ 56.524940] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 56.525928] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 56.526234] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 56.527824] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 56.527860] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 56.528290] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 56.528676] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 56.534208] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 56.534286] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 56.538226] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 56.555225] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 56.555635] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 56.556914] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 56.556992] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 56.557970] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 56.564951] systemd[1]: Started systemd-journald.service - Journal Service. [ 56.580859] systemd-journald[431]: Received client request to flush runtime journal. [ 56.594528] systemd-journald[431]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/system.journal: Journal file uses a different sequence number ID, rotating. [ 56.594537] systemd-journald[431]: Rotating system journal. [ 56.799051] ACPI: AC: AC Adapter [AC] (on-line) [ 56.804121] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9 [ 56.809039] intel_pmc_core INT33A1:00: initialized [ 56.813693] input: Intel HID events as /devices/platform/INT33D5:00/input/input10 [ 56.829271] Consider using thermal netlink events interface [ 56.853169] intel-hid INT33D5:00: platform supports 5 button array [ 56.861150] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input11 [ 56.863972] ACPI: button: Lid Switch [LID0] [ 56.864732] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 56.868954] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12 [ 56.872080] intel_rapl_common: Found RAPL domain package [ 56.872083] intel_rapl_common: Found RAPL domain dram [ 56.883122] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input13 [ 56.919266] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input15 [ 56.923795] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input16 [ 56.925561] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS [ 56.932032] ACPI: button: Power Button [PBTN] [ 56.935362] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 56.942593] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input18 [ 56.942683] ACPI: button: Sleep Button [SBTN] [ 56.942749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input19 [ 56.942826] ACPI: button: Power Button [PWRF] [ 56.972952] mc: Linux media interface: v0.10 [ 56.999854] input: PC Speaker as /devices/platform/pcspkr/input/input20 [ 57.010719] iTCO_vendor_support: vendor-support=0 [ 57.017259] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 57.032814] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 57.060372] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 57.079065] videodev: Linux video capture interface: v2.00 [ 57.091298] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 57.095956] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input21 [ 57.100419] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 57.121424] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 57.121428] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 57.121429] RAPL PMU: hw unit of domain package 2^-14 Joules [ 57.121431] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 57.121432] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 57.121433] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 57.121802] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input22 [ 57.122175] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input23 [ 57.126014] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none. [ 57.150346] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input24 [ 57.202113] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 57.225565] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 57.292754] intel_rapl_common: Found RAPL domain package [ 57.292757] intel_rapl_common: Found RAPL domain core [ 57.292759] intel_rapl_common: Found RAPL domain uncore [ 57.292760] intel_rapl_common: Found RAPL domain dram [ 57.292761] intel_rapl_common: Found RAPL domain psys [ 57.293819] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 57.298127] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 57.298355] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 57.298567] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 57.298777] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 57.308862] usbcore: registered new interface driver uvcvideo [ 57.320287] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 57.323280] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 57.815056] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 57.815542] Console: switching to colour dummy device 80x25 [ 57.815660] i915 0000:00:02.0: vgaarb: deactivate vga console [ 57.815715] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 57.823619] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 57.823636] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 57.824050] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 57.825485] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 57.836287] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 57.838714] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [ 57.839079] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 57.841591] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 57.963740] Bluetooth: Core ver 2.22 [ 57.963760] NET: Registered PF_BLUETOOTH protocol family [ 57.963761] Bluetooth: HCI device and connection manager initialized [ 57.963765] Bluetooth: HCI socket layer initialized [ 57.963767] Bluetooth: L2CAP socket layer initialized [ 57.963770] Bluetooth: SCO socket layer initialized [ 57.969332] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 57.985329] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 57.993881] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 58.029454] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 [ 58.036367] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 58.037085] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26 [ 58.038855] i915 display info: display version: 9 [ 58.038859] i915 display info: cursor_needs_physical: no [ 58.038861] i915 display info: has_cdclk_crawl: no [ 58.038862] i915 display info: has_cdclk_squash: no [ 58.038864] i915 display info: has_ddi: yes [ 58.038865] i915 display info: has_dp_mst: yes [ 58.038866] i915 display info: has_dsb: no [ 58.038867] i915 display info: has_fpga_dbg: yes [ 58.038869] i915 display info: has_gmch: no [ 58.038870] i915 display info: has_hotplug: yes [ 58.038871] i915 display info: has_hti: no [ 58.038872] i915 display info: has_ipc: yes [ 58.038873] i915 display info: has_overlay: no [ 58.038874] i915 display info: has_psr: yes [ 58.038875] i915 display info: has_psr_hw_tracking: yes [ 58.038877] i915 display info: overlay_needs_physical: no [ 58.038878] i915 display info: supports_tv: no [ 58.038879] i915 display info: has_hdcp: yes [ 58.038880] i915 display info: has_dmc: yes [ 58.038881] i915 display info: has_dsc: no [ 58.041315] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 58.041540] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 58.052302] fbcon: i915drmfb (fb0) is primary device [ 58.059298] Console: switching to colour frame buffer device 200x56 [ 58.080147] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 58.132204] audit: type=1400 audit(1705477419.189:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=662 comm="apparmor_parser" [ 58.134368] audit: type=1400 audit(1705477419.189:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=663 comm="apparmor_parser" [ 58.134372] audit: type=1400 audit(1705477419.189:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=663 comm="apparmor_parser" [ 58.134999] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002) [ 58.139041] audit: type=1400 audit(1705477419.197:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser" [ 58.139044] audit: type=1400 audit(1705477419.197:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=664 comm="apparmor_parser" [ 58.139045] audit: type=1400 audit(1705477419.197:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser" [ 58.139046] audit: type=1400 audit(1705477419.197:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=664 comm="apparmor_parser" [ 58.145064] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 58.155759] audit: type=1400 audit(1705477419.213:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=683 comm="apparmor_parser" [ 58.157411] audit: type=1400 audit(1705477419.213:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=682 comm="apparmor_parser" [ 58.158683] audit: type=1400 audit(1705477419.217:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=680 comm="apparmor_parser" [ 58.195963] usbcore: registered new interface driver btusb [ 58.204572] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin [ 58.204907] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 58.204910] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 58.211974] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 58.211982] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 58.211985] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 58.211987] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 58.211989] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 58.211991] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 58.211993] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 58.211995] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 58.309005] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 58.309090] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 58.309167] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 58.309464] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 58.309585] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 58.423369] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2) [ 58.423400] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 58.423435] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:3a:00.0.bin (-2) [ 58.423472] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2) [ 58.423497] ath10k_pci 0000:3a:00.0: firmware: failed to load ath10k/cal-pci-0000:3a:00.0.bin (-2) [ 58.427221] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin [ 58.430294] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [ 58.430300] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 58.430721] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00288- api 6 features wowlan,ignore-otp,mfp crc32 bf907c7c [ 58.511554] ath10k_pci 0000:3a:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin [ 58.515305] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [ 58.566407] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin [ 58.566442] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 58.599769] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 58.620587] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 58.675686] NET: Registered PF_QIPCRTR protocol family [ 58.705824] ath: EEPROM regdomain: 0x6c [ 58.705828] ath: EEPROM indicates we should expect a direct regpair map [ 58.705829] ath: Country alpha2 being used: 00 [ 58.705830] ath: Regpair used: 0x6c [ 58.719598] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 61.269789] rfkill: input handler disabled [ 64.479985] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1) [ 64.479991] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3) [ 64.483461] wlp58s0: authenticated [ 64.486134] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3) [ 64.520571] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3) [ 64.524227] wlp58s0: associated [ 64.602617] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b [ 64.799399] PPP generic driver version 2.4.2 [ 64.804802] NET: Registered PF_PPPOX protocol family [ 64.814975] Initializing XFRM netlink socket [ 64.826360] l2tp_core: L2TP core driver, V2.0 [ 64.829835] l2tp_netlink: L2TP netlink interface [ 64.831076] IPsec XFRM device driver [ 64.834626] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 67.171757] systemd-journald[431]: /var/log/journal/16ae67b9dca94ecebbc8ec78ab24e074/user-5272.journal: Journal file uses a different sequence number ID, rotating. [ 67.569594] rfkill: input handler enabled [ 70.450226] rfkill: input handler disabled [ 80.286449] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 [ 80.286529] pci 0000:01:00.0: enabling Extended Tags [ 80.286766] pci 0000:01:00.0: supports D1 D2 [ 80.286767] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 80.286912] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 80.389984] pci 0000:01:00.0: Adding to iommu group 16 [ 80.390308] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 [ 80.390400] pci 0000:02:00.0: enabling Extended Tags [ 80.391492] pci 0000:02:00.0: supports D1 D2 [ 80.391642] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 80.392869] pci 0000:02:00.0: Adding to iommu group 17 [ 80.393004] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 [ 80.393092] pci 0000:02:01.0: enabling Extended Tags [ 80.393575] pci 0000:02:01.0: supports D1 D2 [ 80.393577] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 80.393981] pci 0000:02:01.0: Adding to iommu group 18 [ 80.394148] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 [ 80.394247] pci 0000:02:02.0: enabling Extended Tags [ 80.394393] pci 0000:02:02.0: supports D1 D2 [ 80.394395] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 80.395567] pci 0000:02:02.0: Adding to iommu group 19 [ 80.395713] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 80.395727] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 80.395737] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 80.395813] pci 0000:02:00.0: PCI bridge to [bus 03] [ 80.395826] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 80.396783] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 80.396798] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 80.396809] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 80.398903] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 [ 80.398938] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff] [ 80.399054] pci 0000:39:00.0: enabling Extended Tags [ 80.399228] pci 0000:39:00.0: supports D1 D2 [ 80.399230] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 80.399394] pci 0000:39:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 80.400666] pci 0000:39:00.0: Adding to iommu group 19 [ 80.400759] pci 0000:02:02.0: PCI bridge to [bus 39] [ 80.400774] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 80.400820] pci_bus 0000:02: Allocating resources [ 80.400842] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 80.400846] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 80.400849] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 80.400852] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 80.400856] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 80.400859] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 80.400861] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 80.400863] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 80.400868] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 80.400870] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 80.400872] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 80.400874] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 80.400876] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 80.400878] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 80.400881] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 80.400883] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 80.400885] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 80.400887] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 80.400888] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 80.400890] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 80.400893] pci 0000:02:00.0: PCI bridge to [bus 03] [ 80.400900] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 80.400913] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 80.400921] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 80.400926] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 80.400936] pci 0000:02:02.0: PCI bridge to [bus 39] [ 80.400942] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 80.400954] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 80.400960] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 80.400965] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 80.402280] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 80.402289] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 80.403532] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 80.403887] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 80.403892] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 80.403896] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 80.403947] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 80.403951] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 80.403953] usb usb3: Product: xHCI Host Controller [ 80.403955] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd [ 80.403957] usb usb3: SerialNumber: 0000:39:00.0 [ 80.404384] hub 3-0:1.0: USB hub found [ 80.404397] hub 3-0:1.0: 2 ports detected [ 80.404906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 80.404909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 80.404912] usb usb4: Product: xHCI Host Controller [ 80.404914] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd [ 80.404916] usb usb4: SerialNumber: 0000:39:00.0 [ 80.405360] hub 4-0:1.0: USB hub found [ 80.405371] hub 4-0:1.0: 2 ports detected [ 80.418060] pci_bus 0000:02: Allocating resources [ 80.418083] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 80.418087] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 80.418090] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 80.418093] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 80.418096] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 80.418098] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 80.418100] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 80.418101] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 80.418105] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 80.418107] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 80.418108] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 80.418110] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 80.418111] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 80.418112] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 80.418114] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 80.418116] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 80.418117] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 80.418118] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 80.418120] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 80.418121] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 80.658037] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 80.808271] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3 [ 80.808276] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 80.808278] usb 3-1: Product: USB2.0 Hub [ 80.808279] usb 3-1: Manufacturer: VIA Labs, Inc. [ 80.808280] usb 3-1: SerialNumber: 000000000 [ 80.809929] hub 3-1:1.0: USB hub found [ 80.810058] hub 3-1:1.0: 5 ports detected [ 80.934182] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 80.982762] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3 [ 80.982767] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 80.982769] usb 4-1: Product: USB3.0 Hub [ 80.982770] usb 4-1: Manufacturer: VIA Labs, Inc. [ 80.982772] usb 4-1: SerialNumber: 000000000 [ 80.984331] hub 4-1:1.0: USB hub found [ 80.984432] hub 4-1:1.0: 4 ports detected [ 81.096445] Registered IR keymap rc-cec [ 81.096497] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0 [ 81.096542] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input32 [ 81.530044] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [ 81.680620] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4 [ 81.680625] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 81.680627] usb 3-1.1: Product: USB2.0 Hub [ 81.680629] usb 3-1.1: Manufacturer: VIA Labs, Inc. [ 81.680630] usb 3-1.1: SerialNumber: 000000000 [ 81.681966] hub 3-1.1:1.0: USB hub found [ 81.682123] hub 3-1.1:1.0: 4 ports detected [ 82.066039] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd [ 82.152111] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4 [ 82.152116] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 82.152117] usb 4-1.1: Product: USB3.0 Hub [ 82.152118] usb 4-1.1: Manufacturer: VIA Labs, Inc. [ 82.152120] usb 4-1.1: SerialNumber: 000000000 [ 82.154080] hub 4-1.1:1.0: USB hub found [ 82.154260] hub 4-1.1:1.0: 4 ports detected [ 82.334145] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 82.355930] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [ 82.355935] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 82.355936] usb 4-1.4: Product: Mass Storage Device [ 82.355938] usb 4-1.4: Manufacturer: Generic [ 82.355939] usb 4-1.4: SerialNumber: 058F84688461 [ 82.405762] SCSI subsystem initialized [ 82.419503] usb-storage 4-1.4:1.0: USB Mass Storage device detected [ 82.419665] scsi host0: usb-storage 4-1.4:1.0 [ 82.419792] usbcore: registered new interface driver usb-storage [ 82.425836] usbcore: registered new interface driver uas [ 82.698062] usb 3-1.1.2: new high-speed USB device number 4 using xhci_hcd [ 82.814754] usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41 [ 82.814759] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 82.814761] usb 3-1.1.2: Product: 4-Port USB 2.0 Hub [ 82.814762] usb 3-1.1.2: Manufacturer: Generic [ 82.817241] hub 3-1.1.2:1.0: USB hub found [ 82.818405] hub 3-1.1.2:1.0: 4 ports detected [ 82.883046] usb 4-1.1.2: new SuperSpeed USB device number 5 using xhci_hcd [ 82.919229] usb 4-1.1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41 [ 82.919242] usb 4-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 82.919247] usb 4-1.1.2: Product: 4-Port USB 3.0 Hub [ 82.919250] usb 4-1.1.2: Manufacturer: Generic [ 82.927399] hub 4-1.1.2:1.0: USB hub found [ 82.928838] hub 4-1.1.2:1.0: 2 ports detected [ 83.674044] usb 3-1.1.2.3: new low-speed USB device number 6 using xhci_hcd [ 83.782726] usb 3-1.1.2.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 83.782730] usb 3-1.1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 83.782732] usb 3-1.1.2.3: Product: USB Optical Mouse [ 83.792074] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.3/3-1.1.2.3:1.0/0003:1BCF:0005.0003/input/input33 [ 83.792196] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.1.2.3/input0 [ 83.858146] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd [ 83.879073] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 83.879078] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 83.879080] usb 4-1.1.3: Product: USB 10/100/1000 LAN [ 83.879081] usb 4-1.1.3: Manufacturer: Realtek [ 83.879082] usb 4-1.1.3: SerialNumber: 000001 [ 84.206427] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 84.243036] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [ 84.255865] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 84.264027] usbcore: registered new device driver r8152-cfgselector [ 84.268852] sd 0:0:0:0: [sda] Media removed, stopped polling [ 84.269164] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 84.310115] usb 3-1.1.2.4: new low-speed USB device number 7 using xhci_hcd [ 84.421108] usb 3-1.1.2.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 84.421115] usb 3-1.1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 84.421117] usb 3-1.1.2.4: Product: Dell KB216 Wired Keyboard [ 84.431903] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.0/0003:413C:2113.0004/input/input34 [ 84.490305] hid-generic 0003:413C:2113.0004: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input0 [ 84.494409] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd [ 84.494738] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0005/input/input35 [ 84.498066] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110) [ 84.532036] r8152 4-1.1.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw [ 84.550145] r8152 4-1.1.3:1.0: load rtl8153a-4 v2 02/07/20 successfully [ 84.554139] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0005/input/input36 [ 84.554225] hid-generic 0003:413C:2113.0005: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input1 [ 84.583730] r8152 4-1.1.3:1.0 eth0: v1.12.13 [ 84.583770] usbcore: registered new interface driver r8152 [ 84.624572] usbcore: registered new interface driver cdc_ether [ 84.628095] usbcore: registered new interface driver r8153_ecm [ 84.702354] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0 [ 85.494016] usb 3-1.5: new high-speed USB device number 8 using xhci_hcd [ 85.594977] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01 [ 85.594983] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 85.594986] usb 3-1.5: Product: USB Billboard Device [ 85.594988] usb 3-1.5: Manufacturer: VIA Labs, Inc. [ 85.594989] usb 3-1.5: SerialNumber: 0000000000000001 [ 87.605105] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on [ 89.618027] ucsi_acpi USBC000:00: GET_CONNECTOR_STATUS failed (-110) [ 94.994027] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110) [ 96.168848] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [ 174.195104] sctp: Hash tables configured (bind 256/256) [ 4290.445120] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off [ 4293.578906] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on [ 7461.281578] usb 4-1.1.2: USB disconnect, device number 5 [ 7461.377506] usb 3-1.1.2: USB disconnect, device number 4 [ 7461.377512] usb 3-1.1.2.3: USB disconnect, device number 6 [ 7461.433767] usb 3-1.1.2.4: USB disconnect, device number 7 [ 7485.597024] PM: suspend entry (deep) [ 7485.602142] Filesystems sync: 0.005 seconds [ 7485.602264] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [ 7485.602335] (NULL device *): firmware: direct-loading firmware regulatory.db [ 7485.602370] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [ 7485.602395] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin [ 7485.602397] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin [ 7485.604675] Freezing user space processes [ 7485.607051] Freezing user space processes completed (elapsed 0.002 seconds) [ 7485.607054] OOM killer disabled. [ 7485.607055] Freezing remaining freezable tasks [ 7485.608070] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 7485.608116] printk: Suspending console(s) (use no_console_suspend to debug) [ 7486.165630] ACPI: EC: interrupt blocked [ 7486.204206] ACPI: PM: Preparing to enter system sleep state S3 [ 7486.217028] ACPI: EC: event blocked [ 7486.217032] ACPI: EC: EC stopped [ 7486.217034] ACPI: PM: Saving platform NVS memory [ 7486.220503] Disabling non-boot CPUs ... [ 7486.222670] smpboot: CPU 1 is now offline [ 7486.227679] smpboot: CPU 2 is now offline [ 7486.233604] smpboot: CPU 3 is now offline [ 7486.244591] ACPI: PM: Low-level resume complete [ 7486.244631] ACPI: EC: EC started [ 7486.244632] ACPI: PM: Restoring platform NVS memory [ 7486.246719] Enabling non-boot CPUs ... [ 7486.246751] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7486.247465] CPU1 is up [ 7486.247484] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 7486.248232] CPU2 is up [ 7486.248250] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 7486.248930] CPU3 is up [ 7486.251774] ACPI: PM: Waking up from system sleep state S3 [ 7486.555872] ACPI: EC: interrupt unblocked [ 7486.556051] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 7486.556062] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 7486.556067] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 7486.558602] pcieport 0000:01:00.0: Unable to change power state from unknown to D0, device inaccessible [ 7486.562612] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible [ 7486.562614] pcieport 0000:02:02.0: Unable to change power state from unknown to D0, device inaccessible [ 7486.564617] pcieport 0000:02:01.0: Unable to change power state from unknown to D0, device inaccessible [ 7486.566243] xhci_hcd 0000:39:00.0: Unable to change power state from D3hot to D0, device inaccessible [ 7486.629505] ACPI: EC: event unblocked [ 7486.630417] xhci_hcd 0000:39:00.0: Unable to change power state from D3cold to D0, device inaccessible [ 7486.630432] xhci_hcd 0000:39:00.0: Controller not ready at resume -19 [ 7486.630434] xhci_hcd 0000:39:00.0: PCI post-resume error -19! [ 7486.630435] xhci_hcd 0000:39:00.0: HC died; cleaning up [ 7486.630448] xhci_hcd 0000:39:00.0: PM: dpm_run_callback(): pci_pm_resume+0x0/0xf0 returns -19 [ 7486.630454] xhci_hcd 0000:39:00.0: PM: failed to resume async: error -19 [ 7486.639864] nvme nvme0: 4/0/0 default/read/poll queues [ 7486.647173] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7486.663178] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7486.677210] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7486.948796] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [ 7487.040106] ------------[ cut here ]------------ [ 7487.040108] refcount_t: underflow; use-after-free. [ 7487.040117] WARNING: CPU: 2 PID: 54815 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 [ 7487.040123] Modules linked in: sctp libcrc32c typec_displayport r8153_ecm cdc_ether usbnet sd_mod r8152 sg mii uas usb_storage scsi_mod scsi_common l2tp_ppp xfrm_interface l2tp_netlink xfrm6_tunnel l2tp_core tunnel6 tunnel4 ip6_udp_tunnel xfrm_user udp_tunnel xfrm_algo pppox ppp_generic slhc ctr ccm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device qrtr snd_sof_pci_intel_skl snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation snd_hda_codec_hdmi snd_sof_intel_hda_mlink soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof snd_sof_utils soundwire_bus snd_ctl_led snd_soc_avs snd_soc_hda_codec snd_soc_skl snd_hda_codec_realtek snd_soc_hdac_hda ath10k_pci snd_hda_ext_core binfmt_misc snd_hda_codec_generic ath10k_core btusb snd_soc_sst_ipc btrtl snd_soc_sst_dsp snd_soc_acpi_intel_match btintel nls_ascii btbcm nls_cp437 ath snd_soc_acpi btmtk mac80211 vfat bluetooth snd_soc_core x86_pkg_temp_thermal fat intel_powerclamp coretemp kvm_intel snd_compress snd_pcm_dmaengine dell_laptop [ 7487.040173] snd_hda_intel mei_pxp mei_hdcp mei_wdt i915 ledtrig_audio snd_intel_dspcfg libarc4 snd_intel_sdw_acpi kvm intel_rapl_msr snd_hda_codec sha3_generic joydev jitterentropy_rng dell_smm_hwmon uvcvideo snd_hda_core cfg80211 videobuf2_vmalloc drbg uvc irqbypass snd_hwdep rapl snd_pcm videobuf2_memops videobuf2_v4l2 dell_wmi intel_cstate ansi_cprng dell_smbios videodev snd_timer dcdbas intel_uncore ucsi_acpi ecdh_generic mei_me typec_ucsi iTCO_wdt intel_pmc_bxt snd iTCO_vendor_support wmi_bmof intel_wmi_thunderbolt watchdog dell_wmi_descriptor pcspkr mei videobuf2_common soundcore rfkill drm_buddy typec ecc mc intel_pch_thermal drm_display_helper cec intel_vbtn soc_button_array rc_core processor_thermal_device_pci_legacy processor_thermal_device ttm processor_thermal_wt_hint processor_thermal_rfim processor_thermal_rapl int3400_thermal drm_kms_helper int3403_thermal intel_rapl_common acpi_thermal_rel intel_pmc_core intel_hid intel_xhci_usb_role_switch processor_thermal_wt_req button processor_thermal_power_floor [ 7487.040218] processor_thermal_mbox sparse_keymap evdev acpi_pad int340x_thermal_zone ac intel_soc_dts_iosf i2c_algo_bit roles hid_multitouch serio_raw msr parport_pc ppdev lp parport loop efi_pstore configfs nfnetlink efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_crypt dm_mod usbhid nvme crc32_pclmul crc32c_intel nvme_core t10_pi hid_generic ghash_clmulni_intel crc64_rocksoft_generic sha512_ssse3 crc64_rocksoft i2c_hid_acpi crc_t10dif i2c_hid crct10dif_generic xhci_pci sha512_generic drm xhci_hcd sha256_ssse3 intel_lpss_pci crct10dif_pclmul i2c_i801 crc64 usbcore sha1_ssse3 crct10dif_common i2c_smbus hid battery intel_lpss idma64 usb_common video wmi aesni_intel crypto_simd cryptd [ 7487.040256] CPU: 2 PID: 54815 Comm: kworker/u8:61 Not tainted 6.7-amd64 #1 Debian 6.7-1~exp1 [ 7487.040258] Hardware name: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022 [ 7487.040260] Workqueue: USBC000:00-con1 ucsi_poll_worker [typec_ucsi] [ 7487.040269] RIP: 0010:refcount_warn_saturate+0xbe/0x110 [ 7487.040272] Code: 01 01 e8 f5 22 a9 ff 0f 0b c3 cc cc cc cc 80 3d e1 62 7e 01 00 75 85 48 c7 c7 38 ca 8f 89 c6 05 d1 62 7e 01 01 e8 d2 22 a9 ff <0f> 0b c3 cc cc cc cc 80 3d bf 62 7e 01 00 0f 85 5e ff ff ff 48 c7 [ 7487.040274] RSP: 0000:ffffb653c149fd90 EFLAGS: 00010282 [ 7487.040276] RAX: 0000000000000000 RBX: ffffa07c8687ac08 RCX: 0000000000000027 [ 7487.040278] RDX: ffffa07ff1521408 RSI: 0000000000000001 RDI: ffffa07ff1521400 [ 7487.040279] RBP: ffffa07c8687ac00 R08: 0000000000000000 R09: 65646e75203a745f [ 7487.040280] R10: 75203b776f6c6672 R11: 72657466612d6573 R12: 0000000000000000 [ 7487.040281] R13: ffffa07c8484fc40 R14: ffffffff8951ffa0 R15: ffffa07ee4b06b48 [ 7487.040282] FS: 0000000000000000(0000) GS:ffffa07ff1500000(0000) knlGS:0000000000000000 [ 7487.040283] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7487.040285] CR2: 0000000000000000 CR3: 0000000246820001 CR4: 00000000003706f0 [ 7487.040286] Call Trace: [ 7487.040288] [ 7487.040289] ? refcount_warn_saturate+0xbe/0x110 [ 7487.040292] ? __warn+0x81/0x130 [ 7487.040298] ? refcount_warn_saturate+0xbe/0x110 [ 7487.040300] ? report_bug+0x171/0x1a0 [ 7487.040304] ? console_unlock+0xcb/0x120 [ 7487.040307] ? handle_bug+0x3c/0x80 [ 7487.040309] ? exc_invalid_op+0x17/0x70 [ 7487.040311] ? asm_exc_invalid_op+0x1a/0x20 [ 7487.040315] ? refcount_warn_saturate+0xbe/0x110 [ 7487.040319] typec_altmode_release+0x49/0xc0 [typec] [ 7487.040334] device_release+0x34/0x90 [ 7487.040339] kobject_put+0x78/0x190 [ 7487.040341] ucsi_unregister_altmodes+0x41/0xa0 [typec_ucsi] [ 7487.040347] ucsi_unregister_partner.part.0+0x77/0xa0 [typec_ucsi] [ 7487.040353] ucsi_check_connection+0x73/0xc0 [typec_ucsi] [ 7487.040359] ucsi_poll_worker+0x3a/0x110 [typec_ucsi] [ 7487.040365] process_one_work+0x171/0x340 [ 7487.040369] worker_thread+0x27b/0x3a0 [ 7487.040372] ? __pfx_worker_thread+0x10/0x10 [ 7487.040374] kthread+0xe5/0x120 [ 7487.040376] ? __pfx_kthread+0x10/0x10 [ 7487.040378] ret_from_fork+0x31/0x50 [ 7487.040381] ? __pfx_kthread+0x10/0x10 [ 7487.040382] ret_from_fork_asm+0x1b/0x30 [ 7487.040388] [ 7487.040388] ---[ end trace 0000000000000000 ]--- [ 7487.224816] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 7487.500805] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 7489.963594] xhci_hcd 0000:39:00.0: remove, state 4 [ 7489.963600] usb usb4: USB disconnect, device number 1 [ 7489.963603] usb 4-1: USB disconnect, device number 2 [ 7489.963606] usb 4-1.1: USB disconnect, device number 3 [ 7489.963608] r8152-cfgselector 4-1.1.3: USB disconnect, device number 6 [ 7489.963647] OOM killer enabled. [ 7489.963648] Restarting tasks ... [ 7489.963678] usb 3-1: USB disconnect, device number 2 [ 7489.963682] usb 3-1.1: USB disconnect, device number 3 [ 7489.964436] usb 3-1.5: USB disconnect, device number 8 [ 7489.975598] done. [ 7489.975613] random: crng reseeded on system resumption [ 7490.021086] usb 4-1.4: USB disconnect, device number 4 [ 7490.099164] PM: suspend exit [ 7490.170671] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 7490.198487] xhci_hcd 0000:39:00.0: USB bus 4 deregistered [ 7490.198514] xhci_hcd 0000:39:00.0: remove, state 4 [ 7490.198518] usb usb3: USB disconnect, device number 1 [ 7490.198727] xhci_hcd 0000:39:00.0: Host halt failed, -19 [ 7490.198730] xhci_hcd 0000:39:00.0: Host not accessible, reset failed. [ 7490.199420] xhci_hcd 0000:39:00.0: USB bus 3 deregistered [ 7490.199763] pcieport 0000:02:00.0: Unable to change power state from D3cold to D0, device inaccessible [ 7490.199900] pci_bus 0000:03: busn_res: [bus 03] is released [ 7490.200076] pci_bus 0000:04: busn_res: [bus 04-38] is released [ 7490.200907] pci_bus 0000:39: busn_res: [bus 39] is released [ 7490.201163] pci_bus 0000:02: busn_res: [bus 02-39] is released [ 7490.285359] Process accounting resumed [ 7490.286821] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 7490.293635] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 7492.312566] ucsi_acpi USBC000:00: ucsi_handle_connector_change: ACK failed (-110) [ 7506.318903] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1) [ 7506.318909] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3) [ 7506.322266] wlp58s0: authenticated [ 7506.324496] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3) [ 7506.358428] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3) [ 7506.361318] wlp58s0: associated [ 7506.374700] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b [ 7763.146603] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [ 7767.186049] PM: suspend entry (deep) [ 7767.199559] Filesystems sync: 0.013 seconds [ 7767.199851] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [ 7767.200030] (NULL device *): firmware: direct-loading firmware regulatory.db [ 7767.200178] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [ 7767.206718] Freezing user space processes [ 7767.211183] Freezing user space processes completed (elapsed 0.004 seconds) [ 7767.211190] OOM killer disabled. [ 7767.211191] Freezing remaining freezable tasks [ 7767.212724] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 7767.212793] printk: Suspending console(s) (use no_console_suspend to debug) [ 7767.774978] ACPI: EC: interrupt blocked [ 7767.810399] ACPI: PM: Preparing to enter system sleep state S3 [ 7767.817652] ACPI: EC: event blocked [ 7767.817653] ACPI: EC: EC stopped [ 7767.817653] ACPI: PM: Saving platform NVS memory [ 7767.819136] Disabling non-boot CPUs ... [ 7767.820425] smpboot: CPU 1 is now offline [ 7767.822823] smpboot: CPU 2 is now offline [ 7767.824836] smpboot: CPU 3 is now offline [ 7767.831982] ACPI: PM: Low-level resume complete [ 7767.832023] ACPI: EC: EC started [ 7767.832024] ACPI: PM: Restoring platform NVS memory [ 7767.834138] Enabling non-boot CPUs ... [ 7767.834164] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7767.834965] CPU1 is up [ 7767.834983] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 7767.835743] CPU2 is up [ 7767.835762] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 7767.836449] CPU3 is up [ 7767.839306] ACPI: PM: Waking up from system sleep state S3 [ 7767.883379] ACPI: EC: interrupt unblocked [ 7767.883692] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 7767.883712] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 7767.883801] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 7767.903331] DMAR: DRHD: handling fault status reg 2 [ 7767.903337] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request [ 7767.904975] ACPI: EC: event unblocked [ 7767.917570] nvme nvme0: 4/0/0 default/read/poll queues [ 7767.921375] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7767.923980] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7767.931564] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7768.223061] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 7768.499091] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [ 7768.775114] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 7768.930818] OOM killer enabled. [ 7768.930820] Restarting tasks ... done. [ 7768.938872] random: crng reseeded on system resumption [ 7768.995553] PM: suspend exit [ 7769.050396] Process accounting resumed [ 7769.306972] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 7769.344055] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 7773.406757] ucsi_acpi USBC000:00: failed to re-enable notifications (-110) [ 7774.614369] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1) [ 7774.614375] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3) [ 7774.616904] wlp58s0: authenticated [ 7774.618743] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3) [ 7774.649373] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3) [ 7774.652149] wlp58s0: associated [ 7774.750355] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b [ 7810.590669] rfkill: input handler enabled [ 7812.432953] rfkill: input handler disabled [ 7834.997603] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [ 7860.148927] PM: suspend entry (deep) [ 7860.158457] Filesystems sync: 0.009 seconds [ 7860.158651] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [ 7860.158817] (NULL device *): firmware: direct-loading firmware regulatory.db [ 7860.158958] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [ 7860.166930] Freezing user space processes [ 7860.172200] Freezing user space processes completed (elapsed 0.005 seconds) [ 7860.172209] OOM killer disabled. [ 7860.172211] Freezing remaining freezable tasks [ 7860.173865] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 7860.173938] printk: Suspending console(s) (use no_console_suspend to debug) [ 7860.737884] ACPI: EC: interrupt blocked [ 7860.770234] ACPI: PM: Preparing to enter system sleep state S3 [ 7860.776133] ACPI: EC: event blocked [ 7860.776133] ACPI: EC: EC stopped [ 7860.776134] ACPI: PM: Saving platform NVS memory [ 7860.777615] Disabling non-boot CPUs ... [ 7860.778952] smpboot: CPU 1 is now offline [ 7860.781204] smpboot: CPU 2 is now offline [ 7860.783276] smpboot: CPU 3 is now offline [ 7860.790397] ACPI: PM: Low-level resume complete [ 7860.790438] ACPI: EC: EC started [ 7860.790438] ACPI: PM: Restoring platform NVS memory [ 7860.792570] Enabling non-boot CPUs ... [ 7860.792598] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7860.793317] CPU1 is up [ 7860.793335] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 7860.794076] CPU2 is up [ 7860.794093] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 7860.794799] CPU3 is up [ 7860.797671] ACPI: PM: Waking up from system sleep state S3 [ 7865.755580] ACPI: EC: interrupt unblocked [ 7865.755882] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 7865.755889] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 7865.755891] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 7865.775498] DMAR: DRHD: handling fault status reg 2 [ 7865.775507] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request [ 7865.777159] ACPI: EC: event unblocked [ 7865.790961] nvme nvme0: 4/0/0 default/read/poll queues [ 7865.866656] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7865.866671] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7865.866678] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7866.155897] Registered IR keymap rc-cec [ 7866.155954] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0 [ 7866.155990] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input117 [ 7866.158866] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 7866.434814] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [ 7866.710836] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 7866.865691] OOM killer enabled. [ 7866.865693] Restarting tasks ... [ 7866.865762] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 [ 7866.865824] pci 0000:01:00.0: enabling Extended Tags [ 7866.865938] pci 0000:01:00.0: supports D1 D2 [ 7866.865941] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7866.866741] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 7866.868455] pci 0000:01:00.0: Adding to iommu group 16 [ 7866.868758] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 [ 7866.868829] pci 0000:02:00.0: enabling Extended Tags [ 7866.868962] pci 0000:02:00.0: supports D1 D2 [ 7866.868966] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7866.869320] pci 0000:02:00.0: Adding to iommu group 17 [ 7866.869421] done. [ 7866.869469] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 [ 7866.869504] random: crng reseeded on system resumption [ 7866.869547] pci 0000:02:01.0: enabling Extended Tags [ 7866.873439] pci 0000:02:01.0: supports D1 D2 [ 7866.873443] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7866.877077] pci 0000:02:01.0: Adding to iommu group 18 [ 7866.877218] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 [ 7866.877283] pci 0000:02:02.0: enabling Extended Tags [ 7866.877414] pci 0000:02:02.0: supports D1 D2 [ 7866.877417] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7866.877646] pci 0000:02:02.0: Adding to iommu group 19 [ 7866.877767] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 7866.877777] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 7866.877785] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 7866.877849] pci 0000:02:00.0: PCI bridge to [bus 03] [ 7866.877858] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 7866.877921] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 7866.877930] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 7866.877936] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 7866.878043] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 [ 7866.878069] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff] [ 7866.878157] pci 0000:39:00.0: enabling Extended Tags [ 7866.878305] pci 0000:39:00.0: supports D1 D2 [ 7866.878307] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 7866.878440] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 7866.878604] pci 0000:39:00.0: Adding to iommu group 19 [ 7866.878691] pci 0000:02:02.0: PCI bridge to [bus 39] [ 7866.878701] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 7866.878733] pci_bus 0000:02: Allocating resources [ 7866.878751] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 7866.878755] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 7866.878757] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 7866.878760] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 7866.878765] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 7866.878767] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 7866.878770] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 7866.878772] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 7866.878777] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 7866.878779] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 7866.878781] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 7866.878782] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 7866.878783] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 7866.878785] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 7866.878788] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 7866.878790] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 7866.878792] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 7866.878794] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 7866.878796] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 7866.878798] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 7866.878800] pci 0000:02:00.0: PCI bridge to [bus 03] [ 7866.878807] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 7866.878817] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 7866.878822] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 7866.878826] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 7866.878835] pci 0000:02:02.0: PCI bridge to [bus 39] [ 7866.878840] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 7866.878849] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 7866.878854] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 7866.878858] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 7866.881171] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 7866.881184] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 7866.882405] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 7866.883794] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 7866.883802] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 7866.883809] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 7866.883889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [ 7866.883891] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7866.883893] usb usb3: Product: xHCI Host Controller [ 7866.883894] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd [ 7866.883895] usb usb3: SerialNumber: 0000:39:00.0 [ 7866.884757] hub 3-0:1.0: USB hub found [ 7866.884773] hub 3-0:1.0: 2 ports detected [ 7866.959759] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [ 7866.959764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7866.959767] usb usb4: Product: xHCI Host Controller [ 7866.959769] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd [ 7866.959770] usb usb4: SerialNumber: 0000:39:00.0 [ 7866.967782] hub 4-0:1.0: USB hub found [ 7866.967804] hub 4-0:1.0: 2 ports detected [ 7866.972597] pci_bus 0000:02: Allocating resources [ 7866.972629] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 7866.972635] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 7866.972638] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 7866.972643] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 7866.972654] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 7866.972657] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 7866.972659] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [ 7866.972660] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [ 7866.972665] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 7866.972667] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 7866.972669] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 7866.972670] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 7866.972677] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 7866.972679] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 7866.972683] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 7866.972685] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 7866.972687] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [ 7866.972689] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [ 7866.972690] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [ 7866.972692] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [ 7866.979246] PM: suspend exit [ 7867.063858] Process accounting resumed [ 7867.069431] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 7867.073875] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 7867.194656] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 7867.344984] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3 [ 7867.344999] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7867.345002] usb 3-1: Product: USB2.0 Hub [ 7867.345004] usb 3-1: Manufacturer: VIA Labs, Inc. [ 7867.345007] usb 3-1: SerialNumber: 000000000 [ 7867.346493] hub 3-1:1.0: USB hub found [ 7867.346700] hub 3-1:1.0: 5 ports detected [ 7867.470976] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 7867.523066] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3 [ 7867.523093] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7867.523108] usb 4-1: Product: USB3.0 Hub [ 7867.523117] usb 4-1: Manufacturer: VIA Labs, Inc. [ 7867.523125] usb 4-1: SerialNumber: 000000000 [ 7867.533947] hub 4-1:1.0: USB hub found [ 7867.534201] hub 4-1:1.0: 4 ports detected [ 7868.078619] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [ 7868.229038] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4 [ 7868.229051] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7868.229053] usb 3-1.1: Product: USB2.0 Hub [ 7868.229055] usb 3-1.1: Manufacturer: VIA Labs, Inc. [ 7868.229057] usb 3-1.1: SerialNumber: 000000000 [ 7868.230313] hub 3-1.1:1.0: USB hub found [ 7868.230431] hub 3-1.1:1.0: 4 ports detected [ 7868.608469] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd [ 7868.697756] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4 [ 7868.697762] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7868.697764] usb 4-1.1: Product: USB3.0 Hub [ 7868.697766] usb 4-1.1: Manufacturer: VIA Labs, Inc. [ 7868.697767] usb 4-1.1: SerialNumber: 000000000 [ 7868.699778] hub 4-1.1:1.0: USB hub found [ 7868.699937] hub 4-1.1:1.0: 4 ports detected [ 7868.774609] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd [ 7868.875829] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01 [ 7868.875834] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7868.875836] usb 3-1.5: Product: USB Billboard Device [ 7868.875838] usb 3-1.5: Manufacturer: VIA Labs, Inc. [ 7868.875840] usb 3-1.5: SerialNumber: 0000000000000001 [ 7872.164011] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1) [ 7872.164017] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3) [ 7872.165547] wlp58s0: authenticated [ 7872.166592] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3) [ 7872.186650] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=3) [ 7872.189642] wlp58s0: associated [ 7872.189668] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b [ 7874.022603] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command [ 7879.398569] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command [ 7879.606517] usb 4-1.4: device not accepting address 4, error -62 [ 7880.374509] usb 3-1.1.2: new high-speed USB device number 5 using xhci_hcd [ 7880.498308] usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41 [ 7880.498313] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7880.498315] usb 3-1.1.2: Product: 4-Port USB 2.0 Hub [ 7880.498316] usb 3-1.1.2: Manufacturer: Generic [ 7880.500428] hub 3-1.1.2:1.0: USB hub found [ 7880.501628] hub 3-1.1.2:1.0: 4 ports detected [ 7880.575256] usb 4-1.1.2: new SuperSpeed USB device number 6 using xhci_hcd [ 7880.610852] usb 4-1.1.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41 [ 7880.610860] usb 4-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7880.610863] usb 4-1.1.2: Product: 4-Port USB 3.0 Hub [ 7880.610865] usb 4-1.1.2: Manufacturer: Generic [ 7880.615601] hub 4-1.1.2:1.0: USB hub found [ 7880.616909] hub 4-1.1.2:1.0: 2 ports detected [ 7881.366633] usb 3-1.1.2.3: new low-speed USB device number 7 using xhci_hcd [ 7881.472592] usb 3-1.1.2.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 7881.472616] usb 3-1.1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7881.472626] usb 3-1.1.2.3: Product: USB Optical Mouse [ 7881.483783] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.3/3-1.1.2.3:1.0/0003:1BCF:0005.0006/input/input126 [ 7881.484212] hid-generic 0003:1BCF:0005.0006: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:39:00.0-1.1.2.3/input0 [ 7881.546936] usb 4-1.1.3: new SuperSpeed USB device number 7 using xhci_hcd [ 7881.568462] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 7881.568485] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 7881.568495] usb 4-1.1.3: Product: USB 10/100/1000 LAN [ 7881.568502] usb 4-1.1.3: Manufacturer: Realtek [ 7881.568508] usb 4-1.1.3: SerialNumber: 000001 [ 7886.822763] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command [ 7892.198686] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command [ 7892.406656] usb 4-1.4: device not accepting address 8, error -62 [ 7893.170691] usb 3-1.1.2.4: new low-speed USB device number 8 using xhci_hcd [ 7893.278713] usb 3-1.1.2.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 7893.278738] usb 3-1.1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7893.278751] usb 3-1.1.2.4: Product: Dell KB216 Wired Keyboard [ 7893.291112] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.0/0003:413C:2113.0007/input/input141 [ 7893.351219] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 7 using xhci_hcd [ 7893.352161] hid-generic 0003:413C:2113.0007: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input0 [ 7893.358003] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0008/input/input142 [ 7893.385990] r8152 4-1.1.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw [ 7893.409349] r8152 4-1.1.3:1.0: load rtl8153a-4 v2 02/07/20 successfully [ 7893.414768] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.0/0000:01:00.0/0000:02:02.0/0000:39:00.0/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.4/3-1.1.2.4:1.1/0003:413C:2113.0008/input/input143 [ 7893.414967] hid-generic 0003:413C:2113.0008: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:39:00.0-1.1.2.4/input1 [ 7893.450031] r8152 4-1.1.3:1.0 eth0: v1.12.13 [ 7893.575704] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0 [ 7896.166295] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on [ 7900.673728] Registered IR keymap rc-cec [ 7900.673905] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0 [ 7900.674064] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input144 [ 7902.212753] usb 3-1.1.2: USB disconnect, device number 5 [ 7902.212775] usb 3-1.1.2.3: USB disconnect, device number 7 [ 7902.260239] usb 4-1.1.2: USB disconnect, device number 6 [ 7902.276144] usb 3-1.1.2.4: USB disconnect, device number 8 [ 7906.686521] usb 1-2: new high-speed USB device number 5 using xhci_hcd [ 7906.851568] usb 1-2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41 [ 7906.851595] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7906.851606] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7906.851615] usb 1-2: Manufacturer: Generic [ 7906.854493] hub 1-2:1.0: USB hub found [ 7906.855760] hub 1-2:1.0: 4 ports detected [ 7907.146517] usb 1-2.3: new low-speed USB device number 6 using xhci_hcd [ 7907.252318] usb 1-2.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 7907.252345] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7907.252356] usb 1-2.3: Product: USB Optical Mouse [ 7907.265406] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:1BCF:0005.0009/input/input145 [ 7907.267326] hid-generic 0003:1BCF:0005.0009: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2.3/input0 [ 7907.346524] usb 1-2.4: new low-speed USB device number 7 using xhci_hcd [ 7907.454437] usb 1-2.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 7907.454463] usb 1-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7907.454475] usb 1-2.4: Product: Dell KB216 Wired Keyboard [ 7907.465414] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:413C:2113.000A/input/input146 [ 7907.523528] hid-generic 0003:413C:2113.000A: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-2.4/input0 [ 7907.529285] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:413C:2113.000B/input/input147 [ 7907.587062] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:413C:2113.000B/input/input148 [ 7907.587573] hid-generic 0003:413C:2113.000B: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-2.4/input1 [ 7908.975263] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 7909.012963] usb 2-2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41 [ 7909.012990] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7909.013002] usb 2-2: Product: 4-Port USB 3.0 Hub [ 7909.013011] usb 2-2: Manufacturer: Generic [ 7909.022896] hub 2-2:1.0: USB hub found [ 7909.024638] hub 2-2:1.0: 2 ports detected [ 7916.523114] rfkill: input handler enabled [ 7926.584908] rfkill: input handler disabled [ 9028.903392] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [11738.418394] perf: interrupt took too long (3167 > 3135), lowering kernel.perf_event_max_sample_rate to 63000 [13177.749479] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [13701.205206] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1) [13701.205222] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3) [13701.207553] wlp58s0: authenticated [13701.212158] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3) [13701.244369] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1) [13701.248773] wlp58s0: associated [13701.309540] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b [13705.993549] usb 1-2: USB disconnect, device number 5 [13705.993569] usb 1-2.3: USB disconnect, device number 6 [13706.029892] usb 1-2.4: USB disconnect, device number 7 [13706.131730] usb 2-2: USB disconnect, device number 2 [13707.611153] usb 3-1: USB disconnect, device number 2 [13707.611165] usb 3-1.1: USB disconnect, device number 3 [13707.613605] usb 3-1.5: USB disconnect, device number 4 [13707.668437] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead [13707.668459] xhci_hcd 0000:39:00.0: HC died; cleaning up [13707.668484] r8152 4-1.1.3:1.0 enx00e04ceabc41: Stop submitting intr, status -108 [13707.723801] xhci_hcd 0000:39:00.0: remove, state 1 [13707.723809] usb usb4: USB disconnect, device number 1 [13707.799615] usb 4-1: USB disconnect, device number 2 [13707.799621] usb 4-1.1: USB disconnect, device number 3 [13707.799624] r8152-cfgselector 4-1.1.3: USB disconnect, device number 7 [13707.849630] xhci_hcd 0000:39:00.0: USB bus 4 deregistered [13707.849641] xhci_hcd 0000:39:00.0: remove, state 1 [13707.849645] usb usb3: USB disconnect, device number 1 [13707.849834] xhci_hcd 0000:39:00.0: Host halt failed, -19 [13707.849837] xhci_hcd 0000:39:00.0: Host not accessible, reset failed. [13707.850076] xhci_hcd 0000:39:00.0: USB bus 3 deregistered [13707.871996] pci_bus 0000:02: Allocating resources [13707.872013] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [13707.872018] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [13707.872020] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [13707.872024] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [13707.872027] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [13707.872029] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [13707.872031] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [13707.872033] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [13707.872037] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [13707.872039] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [13707.872040] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [13707.872042] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [13707.872043] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [13707.872045] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [13707.872047] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [13707.872048] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [13707.872050] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [13707.872051] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [13707.872053] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [13707.872054] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [13712.814935] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible [13712.819095] pci_bus 0000:03: busn_res: [bus 03] is released [13712.819534] pci_bus 0000:04: busn_res: [bus 04-38] is released [13712.821949] pci_bus 0000:39: busn_res: [bus 39] is released [13712.822621] pci_bus 0000:02: busn_res: [bus 02-39] is released [13724.368811] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [13730.096706] PM: suspend entry (deep) [13730.116558] Filesystems sync: 0.019 seconds [13730.116657] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [13730.116777] (NULL device *): firmware: direct-loading firmware regulatory.db [13730.116811] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s [13730.120232] Freezing user space processes [13730.123012] Freezing user space processes completed (elapsed 0.002 seconds) [13730.123016] OOM killer disabled. [13730.123017] Freezing remaining freezable tasks [13730.124430] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [13730.124478] printk: Suspending console(s) (use no_console_suspend to debug) [13730.675112] ACPI: EC: interrupt blocked [13730.711661] ACPI: PM: Preparing to enter system sleep state S3 [13730.719678] ACPI: EC: event blocked [13730.719678] ACPI: EC: EC stopped [13730.719679] ACPI: PM: Saving platform NVS memory [13730.721198] Disabling non-boot CPUs ... [13730.722503] smpboot: CPU 1 is now offline [13730.724551] smpboot: CPU 2 is now offline [13730.726618] smpboot: CPU 3 is now offline [13730.733762] ACPI: PM: Low-level resume complete [13730.733803] ACPI: EC: EC started [13730.733804] ACPI: PM: Restoring platform NVS memory [13730.735920] Enabling non-boot CPUs ... [13730.735946] smpboot: Booting Node 0 Processor 1 APIC 0x2 [13730.736643] CPU1 is up [13730.736662] smpboot: Booting Node 0 Processor 2 APIC 0x1 [13730.737384] CPU2 is up [13730.737402] smpboot: Booting Node 0 Processor 3 APIC 0x3 [13730.738055] CPU3 is up [13730.740921] ACPI: PM: Waking up from system sleep state S3 [13735.879483] ACPI: EC: interrupt unblocked [13735.879663] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [13735.879681] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [13735.879843] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [13735.904678] DMAR: DRHD: handling fault status reg 2 [13735.904686] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request [13735.906343] ACPI: EC: event unblocked [13735.920925] nvme nvme0: 4/0/0 default/read/poll queues [13735.993517] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [13735.993530] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [13735.993538] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [13736.280899] Registered IR keymap rc-cec [13736.280955] rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0 [13736.280992] input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input226 [13736.292152] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [13736.568252] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [13736.844273] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [13736.994731] OOM killer enabled. [13736.994733] Restarting tasks ... [13736.994981] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 [13736.995050] pci 0000:01:00.0: enabling Extended Tags [13736.996084] pci 0000:01:00.0: supports D1 D2 [13736.996088] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [13736.996420] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [13736.997175] pci 0000:01:00.0: Adding to iommu group 16 [13736.997564] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [13736.999378] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 [13736.999451] pci 0000:02:00.0: enabling Extended Tags [13736.999584] pci 0000:02:00.0: supports D1 D2 [13736.999587] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [13736.999864] pci 0000:02:00.0: Adding to iommu group 17 [13737.000042] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 [13737.000128] pci 0000:02:01.0: enabling Extended Tags [13737.000245] pci 0000:02:01.0: supports D1 D2 [13737.000247] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [13737.003933] done. [13737.003960] random: crng reseeded on system resumption [13737.004457] pci 0000:02:01.0: Adding to iommu group 18 [13737.004586] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 [13737.004652] pci 0000:02:02.0: enabling Extended Tags [13737.004777] pci 0000:02:02.0: supports D1 D2 [13737.004780] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [13737.005004] pci 0000:02:02.0: Adding to iommu group 19 [13737.005115] pci 0000:01:00.0: PCI bridge to [bus 02-39] [13737.005125] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [13737.005132] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [13737.005191] pci 0000:02:00.0: PCI bridge to [bus 03] [13737.005200] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [13737.005259] pci 0000:02:01.0: PCI bridge to [bus 04-38] [13737.005269] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [13737.005276] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [13737.005377] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 [13737.005404] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff] [13737.005495] pci 0000:39:00.0: enabling Extended Tags [13737.005633] pci 0000:39:00.0: supports D1 D2 [13737.005635] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [13737.005760] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [13737.005923] pci 0000:39:00.0: Adding to iommu group 19 [13737.005995] pci 0000:02:02.0: PCI bridge to [bus 39] [13737.006006] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [13737.006038] pci_bus 0000:02: Allocating resources [13737.006055] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [13737.006058] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [13737.006061] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [13737.006065] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [13737.006069] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [13737.006071] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [13737.006073] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000] [13737.006075] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [13737.006079] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [13737.006082] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [13737.006084] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [13737.006086] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [13737.006087] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [13737.006089] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [13737.006092] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [13737.006094] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [13737.006096] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000] [13737.006097] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [13737.006099] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000] [13737.006100] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [13737.006102] pci 0000:02:00.0: PCI bridge to [bus 03] [13737.006108] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [13737.006117] pci 0000:02:01.0: PCI bridge to [bus 04-38] [13737.006122] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [13737.006127] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [13737.006134] pci 0000:02:02.0: PCI bridge to [bus 39] [13737.006139] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [13737.006147] pci 0000:01:00.0: PCI bridge to [bus 02-39] [13737.006153] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [13737.006157] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [13737.009150] xhci_hcd 0000:39:00.0: xHCI Host Controller [13737.009160] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [13737.010850] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [13737.011324] xhci_hcd 0000:39:00.0: xHCI Host Controller [13737.011330] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [13737.011335] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [13737.011376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 [13737.011380] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [13737.011381] usb usb3: Product: xHCI Host Controller [13737.011383] usb usb3: Manufacturer: Linux 6.7-amd64 xhci-hcd [13737.011384] usb usb3: SerialNumber: 0000:39:00.0 [13737.011535] hub 3-0:1.0: USB hub found [13737.011545] hub 3-0:1.0: 2 ports detected [13737.014728] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 [13737.014734] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [13737.014736] usb usb4: Product: xHCI Host Controller [13737.014738] usb usb4: Manufacturer: Linux 6.7-amd64 xhci-hcd [13737.014740] usb usb4: SerialNumber: 0000:39:00.0 [13737.014901] hub 4-0:1.0: USB hub found [13737.014912] hub 4-0:1.0: 2 ports detected [13737.015897] pci_bus 0000:02: Allocating resources [13737.015934] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [13737.015939] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [13737.015942] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [13737.015945] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [13737.015951] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [13737.016002] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [13737.016122] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000] [13737.016125] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000] [13737.016131] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [13737.016133] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [13737.016134] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [13737.016136] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [13737.016138] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [13737.016140] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [13737.016142] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [13737.016144] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [13737.016145] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000] [13737.016147] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000] [13737.016149] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000] [13737.016151] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000] [13737.128025] usb 1-1: new high-speed USB device number 8 using xhci_hcd [13737.238961] PM: suspend exit [13737.268024] usb 3-1: new high-speed USB device number 2 using xhci_hcd [13737.297913] usb 1-1: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 1.41 [13737.297920] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [13737.297923] usb 1-1: Product: 4-Port USB 2.0 Hub [13737.297925] usb 1-1: Manufacturer: Generic [13737.300700] hub 1-1:1.0: USB hub found [13737.304016] hub 1-1:1.0: 4 ports detected [13737.415194] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [13737.416033] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd [13737.418454] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3 [13737.418464] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [13737.418467] usb 3-1: Product: USB2.0 Hub [13737.418469] usb 3-1: Manufacturer: VIA Labs, Inc. [13737.418471] usb 3-1: SerialNumber: 000000000 [13737.420456] hub 3-1:1.0: USB hub found [13737.422033] hub 3-1:1.0: 5 ports detected [13737.451675] usb 2-1: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 1.41 [13737.451682] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [13737.451685] usb 2-1: Product: 4-Port USB 3.0 Hub [13737.451686] usb 2-1: Manufacturer: Generic [13737.460088] hub 2-1:1.0: USB hub found [13737.461544] hub 2-1:1.0: 2 ports detected [13737.473654] Process accounting resumed [13737.549711] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [13737.596783] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3 [13737.596789] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [13737.596791] usb 4-1: Product: USB3.0 Hub [13737.596792] usb 4-1: Manufacturer: VIA Labs, Inc. [13737.596794] usb 4-1: SerialNumber: 000000000 [13737.602069] hub 4-1:1.0: USB hub found [13737.602134] hub 4-1:1.0: 4 ports detected [13737.607992] usb 1-1.3: new low-speed USB device number 9 using xhci_hcd [13737.716839] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [13737.716846] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [13737.716849] usb 1-1.3: Product: USB Optical Mouse [13737.728036] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1BCF:0005.000C/input/input229 [13737.729757] hid-generic 0003:1BCF:0005.000C: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1.3/input0 [13737.837893] usb 1-1.4: new low-speed USB device number 10 using xhci_hcd [13737.943342] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [13737.943356] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [13737.943358] usb 1-1.4: Product: Dell KB216 Wired Keyboard [13737.955748] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2113.000D/input/input230 [13738.016411] hid-generic 0003:413C:2113.000D: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-1.4/input0 [13738.021142] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2113.000E/input/input231 [13738.080320] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2113.000E/input/input232 [13738.080871] hid-generic 0003:413C:2113.000E: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-1.4/input1 [13738.151964] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [13738.311654] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4 [13738.311661] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [13738.311663] usb 3-1.1: Product: USB2.0 Hub [13738.311665] usb 3-1.1: Manufacturer: VIA Labs, Inc. [13738.311667] usb 3-1.1: SerialNumber: 000000000 [13738.312655] hub 3-1.1:1.0: USB hub found [13738.312814] hub 3-1.1:1.0: 4 ports detected [13738.408256] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd [13738.469805] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4 [13738.469811] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [13738.469814] usb 4-1.1: Product: USB3.0 Hub [13738.469815] usb 4-1.1: Manufacturer: VIA Labs, Inc. [13738.469817] usb 4-1.1: SerialNumber: 000000000 [13738.477219] hub 4-1.1:1.0: USB hub found [13738.477410] hub 4-1.1:1.0: 4 ports detected [13738.551987] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd [13738.669735] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01 [13738.669742] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [13738.669745] usb 3-1.5: Product: USB Billboard Device [13738.669746] usb 3-1.5: Manufacturer: VIA Labs, Inc. [13738.669748] usb 3-1.5: SerialNumber: 0000000000000001 [13743.045600] wlp58s0: authenticate with 88:71:b1:81:93:1b (local address=9c:b6:d0:d1:6a:b1) [13743.045608] wlp58s0: send auth to 88:71:b1:81:93:1b (try 1/3) [13743.047967] wlp58s0: authenticated [13743.051919] wlp58s0: associate with 88:71:b1:81:93:1b (try 1/3) [13743.068668] wlp58s0: RX AssocResp from 88:71:b1:81:93:1b (capab=0x1011 status=0 aid=1) [13743.071461] wlp58s0: associated [13743.140436] wlp58s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 88:71:b1:81:93:1b [13743.803986] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command [13749.179951] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command [13749.387848] usb 4-1.4: device not accepting address 4, error -62 [13750.851893] usb 4-1.1.3: new SuperSpeed USB device number 6 using xhci_hcd [13750.876525] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [13750.876531] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [13750.876533] usb 4-1.1.3: Product: USB 10/100/1000 LAN [13750.876535] usb 4-1.1.3: Manufacturer: Realtek [13750.876536] usb 4-1.1.3: SerialNumber: 000001 [13750.964207] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 6 using xhci_hcd [13750.989917] r8152 4-1.1.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-4.fw [13751.006104] r8152 4-1.1.3:1.0: load rtl8153a-4 v2 02/07/20 successfully [13751.038157] r8152 4-1.1.3:1.0 eth0: v1.12.13 [13751.413679] r8152 4-1.1.3:1.0 enx00e04ceabc41: renamed from eth0 [13754.548324] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on [13780.274411] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [13949.173910] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier off [13952.435734] r8152 4-1.1.3:1.0 enx00e04ceabc41: carrier on [16308.689709] rfkill: input handler enabled [16319.899816] rfkill: input handler disabled [16322.218829] rfkill: input handler enabled [16322.219599] rfkill: input handler disabled