| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <424169db-49df-f168-d7f7-b48efe6ada@inria.fr>
Date: Thu, 18 Jan 2024 17:50:27 +0100 (CET)
From: Julia Lawall <julia.lawall@...ia.fr>
To: Vincent Guittot <vincent.guittot@...aro.org>
cc: Peter Zijlstra <peterz@...radead.org>, Ingo Molnar <mingo@...hat.com>,
Dietmar Eggemann <dietmar.eggemann@....com>, Mel Gorman <mgorman@...e.de>,
linux-kernel@...r.kernel.org
Subject: Re: EEVDF and NUMA balancing
On Thu, 18 Jan 2024, Vincent Guittot wrote:
> Hi Julia,
>
> Sorry for the delay. I have been involved on other perf regression
>
> On Fri, 5 Jan 2024 at 18:27, Julia Lawall <julia.lawall@...ia.fr> wrote:
> >
> >
> >
> > On Fri, 5 Jan 2024, Julia Lawall wrote:
> >
> > >
> > >
> > > On Fri, 5 Jan 2024, Vincent Guittot wrote:
> > >
> > > > On Fri, 5 Jan 2024 at 15:51, Julia Lawall <julia.lawall@...ia.fr> wrote:
> > > > >
> > > > > > Your system is calling the polling mode and not the default
> > > > > > cpuidle_idle_call() ? This could explain why I don't see such problem
> > > > > > on my system which doesn't have polling
> > > > > >
> > > > > > Are you forcing the use of polling mode ?
> > > > > > If yes, could you check that this problem disappears without forcing
> > > > > > polling mode ?
> > > > >
> > > > > I expanded the code in do_idle to:
> > > > >
> > > > > if (cpu_idle_force_poll) { c1++;
> > > > > tick_nohz_idle_restart_tick();
> > > > > cpu_idle_poll();
> > > > > } else if (tick_check_broadcast_expired()) { c2++;
> > > > > tick_nohz_idle_restart_tick();
> > > > > cpu_idle_poll();
> > > > > } else { c3++;
> > > > > cpuidle_idle_call();
> > > > > }
> > > > >
> > > > > Later, I have:
> > > > >
> > > > > trace_printk("force poll: %d: c1: %d, c2: %d, c3: %d\n",cpu_idle_force_poll, c1, c2, c3);
> > > > > flush_smp_call_function_queue();
> > > > > schedule_idle();
> > > > >
> > > > > force poll, c1 and c2 are always 0, and c3 is always some non-zero value.
> > > > > Sometimes small (often 1), and sometimes large (304 or 305).
> > > > >
> > > > > So I don't think it's calling cpu_idle_poll().
> > > >
> > > > I agree that something else
> > > >
> > > > >
> > > > > x86 has TIF_POLLING_NRFLAG defined to be a non zero value, which I think
> > > > > is sufficient to cause the issue.
> > > >
> > > > Could you trace trace_sched_wake_idle_without_ipi() ans csd traces as well ?
> > > > I don't understand what set need_resched() in your case; having in
> > > > mind that I don't see the problem on my Arm systems and IIRC Peter
> > > > said that he didn't face the problem on his x86 system.
> > >
> > > TIF_POLLING_NRFLAG doesn't seem to be defined on Arm.
> > >
> > > Peter said that he didn't see the problem, but perhaps that was just
> > > random. It requires a NUMA move to occur. I make 20 runs to be sure to
> > > see the problem at least once. But another machine might behave
> > > differently.
> > >
> > > I believe the call chain is:
> > >
> > > scheduler_tick
> > > trigger_load_balance
> > > nohz_balancer_kick
> > > kick_ilb
> > > smp_call_function_single_async
> > > generic_exec_single
> > > __smp_call_single_queue
> > > send_call_function_single_ipi
> > > call_function_single_prep_ipi
> > > set_nr_if_polling <====== sets need_resched
> > >
> > > I'll make a trace to reverify that.
> >
> > This is what I see at a tick, which corresponds to the call chain shown
> > above:
> >
> > bt.B.x-4184 [046] 466.410605: bputs: scheduler_tick: calling trigger_load_balance
> > bt.B.x-4184 [046] 466.410605: bputs: trigger_load_balance: calling nohz_balancer_kick
> > bt.B.x-4184 [046] 466.410605: bputs: trigger_load_balance: calling kick_ilb
> > bt.B.x-4184 [046] 466.410607: bprint: trigger_load_balance: calling smp_call_function_single_async 22
> > bt.B.x-4184 [046] 466.410607: bputs: smp_call_function_single_async: calling generic_exec_single
> > bt.B.x-4184 [046] 466.410607: bputs: generic_exec_single: calling __smp_call_single_queue
> > bt.B.x-4184 [046] 466.410608: bputs: __smp_call_single_queue: calling send_call_function_single_ipi
> > bt.B.x-4184 [046] 466.410608: bputs: __smp_call_single_queue: calling call_function_single_prep_ipi
> > bt.B.x-4184 [046] 466.410608: bputs: call_function_single_prep_ipi: calling set_nr_if_polling
> > bt.B.x-4184 [046] 466.410609: sched_wake_idle_without_ipi: cpu=22
>
> I don't know if you have made progress on this in the meantime.
Not really. Basically after do_idle, there is the call to
flush_smp_call_function_queue that invokes the deposited functions, which
in our case is at best going to raise a softirq, and the call to schedule.
Raising a softirq doesn't happen because of the check for need_resched.
But even if that test were removed, it would still not be useful because
there would be the ksoftirqd running on the idle core that would eliminate
the imbalance between the sockets. Maybe there could be some way to call
run_rebalance_domains directly from nohz_csd_func, since
run_rebalance_domains doesn't use its argument, but at the moment
run_rebalance_domains is not visible to nohz_csd_func.
>
> Regarding the trace above, do you know if anything happens on CPU22
> just before the scheduler tried to kick the ILB on it ?
I don't think so. It's idle.
> Have you found why TIF_POLLING_NRFLAG seems to be always set when the
> kick_ilb happens ? It should be cleared once entering the idle state.
Actually, I don't think it is always set. It switches back and forth
between two cases. I will look for the traces that show that.
> Could you check your cpuidle driver ?
Check what specifically?
thanks,
julia
Powered by blists - more mailing lists