| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <08c15a99-b158-4a69-af63-0bbbb0961da7@flygoat.com>
Date: Fri, 19 Jan 2024 09:56:31 +0000
From: Jiaxun Yang <jiaxun.yang@...goat.com>
To: Gregory CLEMENT <gregory.clement@...tlin.com>,
Paul Burton <paulburton@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>, linux-mips@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Théo Lebrun <theo.lebrun@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v6 14/15] MIPS: Add support for Mobileye EyeQ5
在 2024/1/18 15:52, Gregory CLEMENT 写道:
> Introduce support for the MIPS based Mobileye EyeQ5 SoCs.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@...tlin.com>
Hi Gregory,
Thanks for your reversion!
See my comments below.
> ---
> arch/mips/Kbuild.platforms | 1 +
> arch/mips/Kconfig | 62 ++++++++++++++++
> arch/mips/configs/eyeq5_defconfig | 109 ++++++++++++++++++++++++++++
> arch/mips/mobileye/Kconfig | 12 +++
> arch/mips/mobileye/Platform | 16 ++++
> arch/mips/mobileye/board-epm5.its.S | 24 ++++++
> arch/mips/mobileye/vmlinux.its.S | 32 ++++++++
> 7 files changed, 256 insertions(+)
> create mode 100644 arch/mips/configs/eyeq5_defconfig
> create mode 100644 arch/mips/mobileye/Kconfig
> create mode 100644 arch/mips/mobileye/Platform
> create mode 100644 arch/mips/mobileye/board-epm5.its.S
> create mode 100644 arch/mips/mobileye/vmlinux.its.S
>
> diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
> index a2311c4bce6a6..5c145b67d3bf4 100644
> --- a/arch/mips/Kbuild.platforms
> +++ b/arch/mips/Kbuild.platforms
> @@ -17,6 +17,7 @@ platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/
> platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
> platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
> platform-$(CONFIG_MIPS_MALTA) += mti-malta/
> +platform-$(CONFIG_MACH_EYEQ5) += mobileye/
> platform-$(CONFIG_MACH_NINTENDO64) += n64/
> platform-$(CONFIG_PIC32MZDA) += pic32/
> platform-$(CONFIG_RALINK) += ralink/
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 5549d26448941..e4f624adffee8 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -569,6 +569,68 @@ config MACH_PIC32
> Microchip PIC32 is a family of general-purpose 32 bit MIPS core
> microcontrollers.
>
> +config MACH_EYEQ5
> + bool "Mobileye EyeQ5 SoC"
> + select MACH_GENERIC_CORE
> + select ARM_AMBA
> + select WEAK_ORDERING
> + select WEAK_REORDERING_BEYOND_LLSC
^ Those should be selected for MIPS_CPS, as I mentioned before.
> + select PHYSICAL_START_BOOL
> + select ARCH_SPARSEMEM_DEFAULT if 64BIT
> + select BOOT_RAW
> + select BUILTIN_DTB
> + select CEVT_R4K
> + select CLKSRC_MIPS_GIC
> + select COMMON_CLK
> + select CPU_MIPSR2_IRQ_EI
> + select CPU_MIPSR2_IRQ_VI
> + select CSRC_R4K
> + select DMA_NONCOHERENT
> + select HAVE_PCI
> + select IRQ_MIPS_CPU
> + select MIPS_AUTO_PFN_OFFSET
> + select MIPS_CPU_SCACHE
> + select MIPS_GIC
> + select MIPS_L1_CACHE_SHIFT_7
> + select PCI_DRIVERS_GENERIC
> + select SMP_UP if SMP
> + select SWAP_IO_SPACE
> + select SYS_HAS_CPU_MIPS64_R6
> + select SYS_SUPPORTS_32BIT_KERNEL
^ I don't think you can build 32bit kernel due to your address space
limitation.
> + select SYS_SUPPORTS_64BIT_KERNEL
> + select SYS_SUPPORTS_BIG_ENDIAN
^ Does it support big endian mode?
For I6500 endian pin is driven by external circuit. You shouldn't select
it unless you have
physical endian pin or reset and set register at SoC level.
> + select SYS_SUPPORTS_HIGHMEM
> + select SYS_SUPPORTS_LITTLE_ENDIAN
> + select SYS_SUPPORTS_MICROMIPS
> + select SYS_SUPPORTS_MIPS16
^ Both MICROMIPS and MIPS16 are not available on MIPS R6.
> + select SYS_SUPPORTS_MIPS_CPS
> + select SYS_SUPPORTS_MULTITHREADING
^ MT is not possible on R6, we do have VP on R6.
> + select SYS_SUPPORTS_RELOCATABLE
> + select SYS_SUPPORTS_SMARTMIPS
^ SMARTMIPS is deprecated on R6.
> + select SYS_SUPPORTS_ZBOOT
> + select UHI_BOOT
> + select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
> + select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
> + select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
> + select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
> + select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
> + select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
> + select USE_OF
> + help
> + Select this to build a kernel supporting EyeQ5 SoC from Mobileye.
> +
> + bool
> +
> +config FIT_IMAGE_FDT_EPM5
> + bool "Include FDT for Mobileye EyeQ5 development platforms"
> + depends on MACH_EYEQ5
> + default n
> + help
> + Enable this to include the FDT for the EyeQ5 development platforms
> + from Mobileye in the FIT kernel image.
> + This requires u-boot on the platform.
> +
> +
> config MACH_NINTENDO64
> bool "Nintendo 64 console"
> select CEVT_R4K
> diff --git a/arch/mips/configs/eyeq5_defconfig b/arch/mips/configs/eyeq5_defconfig
> new file mode 100644
> index 0000000000000..653fb11b1580d
> --- /dev/null
> +++ b/arch/mips/configs/eyeq5_defconfig
> @@ -0,0 +1,109 @@
> +CONFIG_SYSVIPC=y
> +CONFIG_NO_HZ_IDLE=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_BPF_SYSCALL=y
> +CONFIG_TASKSTATS=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_MEMCG=y
> +CONFIG_BLK_CGROUP=y
> +CONFIG_CFS_BANDWIDTH=y
> +CONFIG_RT_GROUP_SCHED=y
> +CONFIG_CGROUP_PIDS=y
> +CONFIG_CGROUP_FREEZER=y
> +CONFIG_CPUSETS=y
> +CONFIG_CGROUP_DEVICE=y
> +CONFIG_CGROUP_CPUACCT=y
> +CONFIG_NAMESPACES=y
> +CONFIG_USER_NS=y
> +CONFIG_SCHED_AUTOGROUP=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_EXPERT=y
> +CONFIG_MACH_EYEQ5=y
> +CONFIG_FIT_IMAGE_FDT_EPM5=y
> +CONFIG_CPU_LITTLE_ENDIAN=y
> +CONFIG_64BIT=y
> +CONFIG_PAGE_SIZE_16KB=y
> +CONFIG_MIPS_CPS=y
> +CONFIG_CPU_HAS_MSA=y
> +CONFIG_NR_CPUS=16
> +CONFIG_JUMP_LABEL=y
> +CONFIG_COMPAT_32BIT_TIME=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_TRIM_UNUSED_KSYMS=y
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_SPARSEMEM_MANUAL=y
> +CONFIG_USERFAULTFD=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_NET_KEY=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_NETFILTER=y
> +CONFIG_CAN=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MSI=y
> +CONFIG_PCI_DEBUG=y
> +CONFIG_PCI_ENDPOINT=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +CONFIG_CONNECTOR=y
> +CONFIG_MTD=y
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BLOCK=y
> +CONFIG_SCSI=y
> +CONFIG_NETDEVICES=y
> +CONFIG_MACVLAN=y
> +CONFIG_IPVLAN=y
> +CONFIG_MACB=y
> +CONFIG_MARVELL_PHY=y
> +CONFIG_MICREL_PHY=y
> +CONFIG_CAN_M_CAN=y
> +CONFIG_SERIAL_AMBA_PL011=y
> +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
> +CONFIG_HW_RANDOM=y
> +# CONFIG_PTP_1588_CLOCK is not set
> +CONFIG_PINCTRL=y
> +CONFIG_MFD_SYSCON=y
> +CONFIG_HID_A4TECH=y
> +CONFIG_HID_BELKIN=y
> +CONFIG_HID_CHERRY=y
> +CONFIG_HID_CYPRESS=y
> +CONFIG_HID_EZKEY=y
> +CONFIG_HID_ITE=y
> +CONFIG_HID_KENSINGTON=y
> +CONFIG_HID_REDRAGON=y
> +CONFIG_HID_MICROSOFT=y
> +CONFIG_HID_MONTEREY=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +# CONFIG_IOMMU_SUPPORT is not set
> +CONFIG_RESET_CONTROLLER=y
> +# CONFIG_NVMEM is not set
> +CONFIG_EXT4_FS=y
> +CONFIG_EXT4_FS_POSIX_ACL=y
> +CONFIG_EXT4_FS_SECURITY=y
> +CONFIG_FS_ENCRYPTION=y
> +CONFIG_FUSE_FS=y
> +CONFIG_CUSE=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_TMPFS_POSIX_ACL=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3_ACL=y
> +CONFIG_NFS_V4=y
> +CONFIG_NFS_V4_1=y
> +CONFIG_NFS_V4_2=y
> +CONFIG_ROOT_NFS=y
> +CONFIG_CRYPTO_CRC32_MIPS=y
> +CONFIG_FRAME_WARN=1024
> +CONFIG_DEBUG_FS=y
> +# CONFIG_RCU_TRACE is not set
> +# CONFIG_FTRACE is not set
> +CONFIG_CMDLINE_BOOL=y
> +CONFIG_CMDLINE="earlycon"
^ Better not overriding cmdline here, you can leave it in chosen node.
> diff --git a/arch/mips/mobileye/Kconfig b/arch/mips/mobileye/Kconfig
> new file mode 100644
> index 0000000000000..781007542422d
> --- /dev/null
> +++ b/arch/mips/mobileye/Kconfig
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: GPL-2.0
> +if MACH_EYEQ5
> +
> +config BOARD_EYEQ5
> + bool "Support EyeQ5 platform"
> + select WEAK_ORDERING
> + select WEAK_REORDERING_BEYOND_LLSC
> + default n
> + help
> + This enables support for EyeQ5 platform.
^ Do you need this board option, given that you can build a generic
kernel for all
EyeQ5 systems?
Thanks
- Jiaxun
> +
> +endif
> diff --git a/arch/mips/mobileye/Platform b/arch/mips/mobileye/Platform
> new file mode 100644
> index 0000000000000..43b6f4644592f
> --- /dev/null
> +++ b/arch/mips/mobileye/Platform
> @@ -0,0 +1,16 @@
> +#
> +# Copyright (C) 2016 Imagination Technologies
> +# Author: Paul Burton <paul.burton@...s.com>
> +#
> +# This program is free software; you can redistribute it and/or modify it
> +# under the terms of the GNU General Public License as published by the
> +# Free Software Foundation; either version 2 of the License, or (at your
> +# option) any later version.
> +#
> +
> +load-$(CONFIG_MACH_EYEQ5) = 0xa800000808000000
> +all-$(CONFIG_MACH_EYEQ5) += vmlinux.gz.itb
> +
> +its-y := vmlinux.its.S
> +its-$(CONFIG_FIT_IMAGE_FDT_EPM5) += board-epm5.its.S
> +
> diff --git a/arch/mips/mobileye/board-epm5.its.S b/arch/mips/mobileye/board-epm5.its.S
> new file mode 100644
> index 0000000000000..08e8c4f183d63
> --- /dev/null
> +++ b/arch/mips/mobileye/board-epm5.its.S
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/ {
> + images {
> + fdt-mobileye-epm5 {
> + description = "Mobileeye MP5 Device Tree";
> + data = /incbin/("boot/dts/mobileye/eyeq5-epm5.dtb");
> + type = "flat_dt";
> + arch = "mips";
> + compression = "none";
> + hash {
> + algo = "sha1";
> + };
> + };
> + };
> +
> + configurations {
> + default = "conf-1";
> + conf-1 {
> + description = "Mobileye EPM5 Linux kernel";
> + kernel = "kernel";
> + fdt = "fdt-mobileye-epm5";
> + };
> + };
> +};
> diff --git a/arch/mips/mobileye/vmlinux.its.S b/arch/mips/mobileye/vmlinux.its.S
> new file mode 100644
> index 0000000000000..3e254676540f4
> --- /dev/null
> +++ b/arch/mips/mobileye/vmlinux.its.S
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/dts-v1/;
> +
> +/ {
> + description = KERNEL_NAME;
> + #address-cells = <ADDR_CELLS>;
> +
> + images {
> + kernel {
> + description = KERNEL_NAME;
> + data = /incbin/(VMLINUX_BINARY);
> + type = "kernel";
> + arch = "mips";
> + os = "linux";
> + compression = VMLINUX_COMPRESSION;
> + load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
> + entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
> + hash {
> + algo = "sha1";
> + };
> + };
> + };
> +
> + configurations {
> + default = "conf-default";
> +
> + conf-default {
> + description = "Generic Linux kernel";
> + kernel = "kernel";
> + };
> + };
> +};
--
---
Jiaxun Yang
Powered by blists - more mailing lists