linux-kernel - [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240119171122.3057511-6-Frank.Li@nxp.com>
Date: Fri, 19 Jan 2024 12:11:11 -0500
From: Frank Li <Frank.Li@....com>
To: manivannan.sadhasivam@...aro.org
Cc: Frank.Li@....com,
	bhelgaas@...gle.com,
	conor+dt@...nel.org,
	devicetree@...r.kernel.org,
	festevam@...il.com,
	helgaas@...nel.org,
	hongxing.zhu@....com,
	imx@...ts.linux.dev,
	kernel@...gutronix.de,
	krzysztof.kozlowski+dt@...aro.org,
	krzysztof.kozlowski@...aro.org,
	kw@...ux.com,
	l.stach@...gutronix.de,
	linux-arm-kernel@...ts.infradead.org,
	linux-imx@....com,
	linux-kernel@...r.kernel.org,
	linux-pci@...r.kernel.org,
	lpieralisi@...nel.org,
	robh@...nel.org,
	s.hauer@...gutronix.de,
	shawnguo@...nel.org
Subject: [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID

Avoid use get slot id by compared with register physical address. If there
are more than 2 slots, compared logic will become complex.

"linux,pci-domain" already exist at dts since commit:
	commit (c0b70f05c87f3b arm64: dts: imx8mq: use_dt_domains for pci node).

So it is safe to remove compare basic address code:
	...
	if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
		imx6_pcie->controller_id = 1;
	...

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Signed-off-by: Frank Li <Frank.Li@....com>
---

Notes:
    Change from v7 to v8
    - fixed comments
    - Added Manivannan Sadhasivam's review tag
    Change from v5 to v7
    - none
    Change from v3 to v4
    - remove compare basic address logic
    Change from v2 to v3
    - none
    Change from v1 to v2
    - fix of_get_pci_domain_nr return value check logic

 drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index eda6bc6ef80ee..773411d20329f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -33,6 +33,7 @@
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 
+#include "../../pci.h"
 #include "pcie-designware.h"
 
 #define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
@@ -40,7 +41,6 @@
 #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
 #define IMX8MQ_GPR_PCIE_VREG_BYPASS		BIT(12)
 #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
-#define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
 
 #define to_imx6_pcie(x)	dev_get_drvdata((x)->dev)
 
@@ -1279,13 +1279,17 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 					     "Failed to get PCIEPHY reset control\n");
 	}
 
-	switch (imx6_pcie->drvdata->variant) {
-	case IMX7D:
-		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
-			imx6_pcie->controller_id = 1;
-	default:
-		break;
-	}
+	/* Using linux,pci-domain as PCI slot id */
+	imx6_pcie->controller_id = of_get_pci_domain_nr(node);
+	/*
+	 * If there are no "linux,pci-domain" property specified in DT, then assume only one
+	 * controller is available.
+	 */
+	if (imx6_pcie->controller_id == -EINVAL)
+		imx6_pcie->controller_id = 0;
+	else if (imx6_pcie->controller_id < 0)
+		return dev_err_probe(dev, imx6_pcie->controller_id,
+				     "linux,pci-domain have wrong value\n");
 
 	/* Grab turnoff reset */
 	imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
-- 
2.34.1