linux-kernel - Re: [PATCH v1] NCSI: Add propety : no-channel-monitor and start-redo-probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20240119213640.0b8efe12@kernel.org>
Date: Fri, 19 Jan 2024 21:36:40 -0800
From: Jakub Kicinski <kuba@...nel.org>
To: Delphine CC Chiu <Delphine_CC_Chiu@...ynn.com>
Cc: patrick@...cx.xyz, Samuel Mendoza-Jonas <sam@...dozajonas.com>, "David
 S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Paolo
 Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] NCSI: Add propety : no-channel-monitor and
 start-redo-probe

On Thu, 18 Jan 2024 13:22:20 +0800 Delphine CC Chiu wrote:
> Add property start-redo-probe to redo probe, because Mellanox cx7 nic card
> cannot't get mac address after nic card hot-plug.
> Setup start-redo-probe property so that nic card can get MAC address again.
> Also setup no-channel-monitor property so that the log won't keep
> popping up when nic card host-plug.

Device tree is supposed to describe the hardware (the BMC hardware)
this seems to me like configuration which can potentially be done
via the NCSI netlink, can it not?
-- 
pw-bot: cr