linux-kernel - [PATCH v4 6/8] arm64: dts: qcom: sc7180: Add UFS nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Sun, 21 Jan 2024 17:57:46 +0100
From: David Wronek <davidwronek@...il.com>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, 
 Herbert Xu <herbert@...dor.apana.org.au>, 
 "David S. Miller" <davem@...emloft.net>, Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
 Alim Akhtar <alim.akhtar@...sung.com>, Avri Altman <avri.altman@....com>, 
 Bart Van Assche <bvanassche@....org>, Andy Gross <agross@...nel.org>, 
 Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>, 
 cros-qcom-dts-watchers@...omium.org
Cc: linux-arm-msm@...r.kernel.org, linux-crypto@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-scsi@...r.kernel.org, linux-phy@...ts.infradead.org, 
 ~postmarketos/upstreaming@...ts.sr.ht, David Wronek <davidwronek@...il.com>
Subject: [PATCH v4 6/8] arm64: dts: qcom: sc7180: Add UFS nodes

Add the UFS, QMP PHY and ICE nodes for the Qualcomm SC7180 SoC.

Signed-off-by: David Wronek <davidwronek@...il.com>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 70 ++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 4dcaa15caef2..93c867cac755 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1532,6 +1532,76 @@ mmss_noc: interconnect@...0000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		ufs_mem_hc: ufshc@...4000 {
+			compatible = "qcom,sc7180-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>;
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@...7000 {
+			compatible = "qcom,sc7180-qmp-ufs-phy",
+				     "qcom,sm7150-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ice: crypto@...0000 {
+			compatible = "qcom,sc7180-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d90000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		ipa: ipa@...0000 {
 			compatible = "qcom,sc7180-ipa";
 

-- 
2.43.0