[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240122053451.8004-1-arinc.unal@arinc9.com>
Date: Mon, 22 Jan 2024 08:34:51 +0300
From: Arınç ÜNAL <arinc.unal@...nc9.com>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Arınç ÜNAL <arinc.unal@...nc9.com>,
mithat.guner@...ont.com,
erkin.bozoglu@...ont.com,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH net-next] net: dsa: mt7530: select MEDIATEK_GE_PHY for NET_DSA_MT7530_MDIO
Quoting from commit 4223f8651287 ("net: dsa: mt7530: make NET_DSA_MT7530
select MEDIATEK_GE_PHY"):
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.
A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.
Now, the switch can be used without the PHYs but, at the moment, every
hardware design out there that I have seen uses them. For that, it would
make the most sense to force the selection of MEDIATEK_GE_PHY for the MDIO
interface which currently controls the MT7530 and MT7531 switches.
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index f8c1d73b251d..3092b391031a 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -48,7 +48,7 @@ config NET_DSA_MT7530
config NET_DSA_MT7530_MDIO
tristate "MediaTek MT7530 MDIO interface driver"
depends on NET_DSA_MT7530
- imply MEDIATEK_GE_PHY
+ select MEDIATEK_GE_PHY
select PCS_MTK_LYNXI
help
This enables support for the MediaTek MT7530 and MT7531 switch
--
2.40.1
Powered by blists - more mailing lists