linux-kernel - [PATCH v3 0/3] Add AM64x ICSSG Ethernet support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date: Mon, 22 Jan 2024 17:00:42 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Vignesh Raghavendra <vigneshr@...com>, Nishanth Menon <nm@...com>
CC: Andrew Lunn <andrew@...n.ch>, Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring
	<robh+dt@...nel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
        Tero
 Kristo <kristo@...nel.org>, <srk@...com>, <r-gunasekaran@...com>,
        Roger
 Quadros <rogerq@...nel.org>,
        MD Danish Anwar <danishanwar@...com>
Subject: [PATCH v3 0/3] Add AM64x ICSSG Ethernet support

Hi All,

This series adds support for ICSSG ethernet on AM64x. 
This series is based on the latest next-20231211 linux-next.

AM64x EVM has three ethernet ports. One is dedicated to CPSW and one is
dedicated to ICSSG1. The remaining port is muxed between CPSW and ICSSG1
ICSSG1 ports. The ICSSG1 node is added in the k3-am642-evm.dts. By default
the muxed port is used by CPSW so 2nd ICSSG1 port is disabled in the
k3-am642-evm.dts. But overlay k3-am642-evm-icssg1-dualemac.dtso can be
applied to use muxed port as ICSSG1.

This is the v3 of the series [v1].

Changes from v2 to v3:
*) No functional changes.
*) Rebased on latest linux-next (next-20240122) after 6.8-rc1.

Changes from v1 to v2:
*) Fixed aliases section in k3-am642-evm.dts
*) Fixed firmware-names in k3-am642-evm.dts
*) Changed icssg1_phy1 to ethernet-phy@f from ethernet-phy@0 as suggested
   by Andrew L.
*) Changed makefile to handle overlays using CONFIG_OF_ALL_DTBS as
   suggested by Nishant and Andrew Davis.
*) Fixed aliases section in k3-am642-evm-icssg1-dualemac.dtso
*) Fixed pinctrl in k3-am642-evm-icssg1-dualemac.dtso
*) Updated commit message of patch 3/3 of the series to warn about adding
   label name to 'mdio-mux-1' node.

[v1] https://lore.kernel.org/all/20231207081917.340167-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20231212165832.3933335-1-danishanwar@ti.com/

Thanks and Regards,
MD Danish Anwar

MD Danish Anwar (2):
  arm64: dts: ti: k3-am642-evm: add ICSSG1 Ethernet support
  arm64: dts: ti: k3-am642-evm: add overlay for icssg1 2nd port

Suman Anna (1):
  arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes

 arch/arm64/boot/dts/ti/Makefile               |   5 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |  24 ++++
 .../dts/ti/k3-am642-evm-icssg1-dualemac.dtso  |  75 +++++++++++++
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       | 104 +++++++++++++++++-
 4 files changed, 207 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso

base-commit: 319fbd8fc6d339e0a1c7b067eed870c518a13a02
-- 
2.34.1