| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0b6b8738-9ea3-44fa-a624-9297bd55778f@amd.com>
Date: Mon, 22 Jan 2024 14:41:14 +0100
From: Christian König <christian.koenig@....com>
To: Paul Cercueil <paul@...pouillou.net>,
Christian König <ckoenig.leichtzumerken@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jonathan Corbet <corbet@....net>, Sumit Semwal <sumit.semwal@...aro.org>
Cc: Jonathan Cameron <jic23@...nel.org>, Nuno Sá
<noname.nuno@...il.com>, Michael Hennerich <Michael.Hennerich@...log.com>,
linux-usb@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linaro-mm-sig@...ts.linaro.org
Subject: Re: [Linaro-mm-sig] [PATCH v5 1/6] dma-buf: Add
dma_buf_{begin,end}_access()
Am 22.01.24 um 12:01 schrieb Paul Cercueil:
> Hi Christian,
>
> Le lundi 22 janvier 2024 à 11:35 +0100, Christian König a écrit :
>> Am 19.01.24 um 15:13 schrieb Paul Cercueil:
>>> These functions should be used by device drivers when they start
>>> and
>>> stop accessing the data of DMABUF. It allows DMABUF importers to
>>> cache
>>> the dma_buf_attachment while ensuring that the data they want to
>>> access
>>> is available for their device when the DMA transfers take place.
>> As Daniel already noted as well this is a complete no-go from the
>> DMA-buf design point of view.
> What do you mean "as Daniel already noted"? It was him who suggested
> this.
Sorry, I haven't fully catched up to the discussion then.
In general DMA-buf is build around the idea that the data can be
accessed coherently by the involved devices.
Having a begin/end of access for devices was brought up multiple times
but so far rejected for good reasons.
That an exporter has to call extra functions to access his own buffers
is a complete no-go for the design since this forces exporters into
doing extra steps for allowing importers to access their data.
That in turn is pretty much un-testable unless you have every possible
importer around while testing the exporter.
Regards,
Christian.
>
>> Regards,
>> Christian.
> Cheers,
> -Paul
>
>>> Signed-off-by: Paul Cercueil <paul@...pouillou.net>
>>>
>>> ---
>>> v5: New patch
>>> ---
>>> drivers/dma-buf/dma-buf.c | 66
>>> +++++++++++++++++++++++++++++++++++++++
>>> include/linux/dma-buf.h | 37 ++++++++++++++++++++++
>>> 2 files changed, 103 insertions(+)
>>>
>>> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
>>> index 8fe5aa67b167..a8bab6c18fcd 100644
>>> --- a/drivers/dma-buf/dma-buf.c
>>> +++ b/drivers/dma-buf/dma-buf.c
>>> @@ -830,6 +830,8 @@ static struct sg_table * __map_dma_buf(struct
>>> dma_buf_attachment *attach,
>>> * - dma_buf_mmap()
>>> * - dma_buf_begin_cpu_access()
>>> * - dma_buf_end_cpu_access()
>>> + * - dma_buf_begin_access()
>>> + * - dma_buf_end_access()
>>> * - dma_buf_map_attachment_unlocked()
>>> * - dma_buf_unmap_attachment_unlocked()
>>> * - dma_buf_vmap_unlocked()
>>> @@ -1602,6 +1604,70 @@ void dma_buf_vunmap_unlocked(struct dma_buf
>>> *dmabuf, struct iosys_map *map)
>>> }
>>> EXPORT_SYMBOL_NS_GPL(dma_buf_vunmap_unlocked, DMA_BUF);
>>>
>>> +/**
>>> + * @dma_buf_begin_access - Call before any hardware access from/to
>>> the DMABUF
>>> + * @attach: [in] attachment used for hardware access
>>> + * @sg_table: [in] scatterlist used for the DMA transfer
>>> + * @direction: [in] direction of DMA transfer
>>> + */
>>> +int dma_buf_begin_access(struct dma_buf_attachment *attach,
>>> + struct sg_table *sgt, enum
>>> dma_data_direction dir)
>>> +{
>>> + struct dma_buf *dmabuf;
>>> + bool cookie;
>>> + int ret;
>>> +
>>> + if (WARN_ON(!attach))
>>> + return -EINVAL;
>>> +
>>> + dmabuf = attach->dmabuf;
>>> +
>>> + if (!dmabuf->ops->begin_access)
>>> + return 0;
>>> +
>>> + cookie = dma_fence_begin_signalling();
>>> + ret = dmabuf->ops->begin_access(attach, sgt, dir);
>>> + dma_fence_end_signalling(cookie);
>>> +
>>> + if (WARN_ON_ONCE(ret))
>>> + return ret;
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL_NS_GPL(dma_buf_begin_access, DMA_BUF);
>>> +
>>> +/**
>>> + * @dma_buf_end_access - Call after any hardware access from/to
>>> the DMABUF
>>> + * @attach: [in] attachment used for hardware access
>>> + * @sg_table: [in] scatterlist used for the DMA transfer
>>> + * @direction: [in] direction of DMA transfer
>>> + */
>>> +int dma_buf_end_access(struct dma_buf_attachment *attach,
>>> + struct sg_table *sgt, enum
>>> dma_data_direction dir)
>>> +{
>>> + struct dma_buf *dmabuf;
>>> + bool cookie;
>>> + int ret;
>>> +
>>> + if (WARN_ON(!attach))
>>> + return -EINVAL;
>>> +
>>> + dmabuf = attach->dmabuf;
>>> +
>>> + if (!dmabuf->ops->end_access)
>>> + return 0;
>>> +
>>> + cookie = dma_fence_begin_signalling();
>>> + ret = dmabuf->ops->end_access(attach, sgt, dir);
>>> + dma_fence_end_signalling(cookie);
>>> +
>>> + if (WARN_ON_ONCE(ret))
>>> + return ret;
>>> +
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL_NS_GPL(dma_buf_end_access, DMA_BUF);
>>> +
>>> #ifdef CONFIG_DEBUG_FS
>>> static int dma_buf_debug_show(struct seq_file *s, void *unused)
>>> {
>>> diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
>>> index 8ff4add71f88..8ba612c7cc16 100644
>>> --- a/include/linux/dma-buf.h
>>> +++ b/include/linux/dma-buf.h
>>> @@ -246,6 +246,38 @@ struct dma_buf_ops {
>>> */
>>> int (*end_cpu_access)(struct dma_buf *, enum
>>> dma_data_direction);
>>>
>>> + /**
>>> + * @begin_access:
>>> + *
>>> + * This is called from dma_buf_begin_access() when a
>>> device driver
>>> + * wants to access the data of the DMABUF. The exporter
>>> can use this
>>> + * to flush/sync the caches if needed.
>>> + *
>>> + * This callback is optional.
>>> + *
>>> + * Returns:
>>> + *
>>> + * 0 on success or a negative error code on failure.
>>> + */
>>> + int (*begin_access)(struct dma_buf_attachment *, struct
>>> sg_table *,
>>> + enum dma_data_direction);
>>> +
>>> + /**
>>> + * @end_access:
>>> + *
>>> + * This is called from dma_buf_end_access() when a device
>>> driver is
>>> + * done accessing the data of the DMABUF. The exporter can
>>> use this
>>> + * to flush/sync the caches if needed.
>>> + *
>>> + * This callback is optional.
>>> + *
>>> + * Returns:
>>> + *
>>> + * 0 on success or a negative error code on failure.
>>> + */
>>> + int (*end_access)(struct dma_buf_attachment *, struct
>>> sg_table *,
>>> + enum dma_data_direction);
>>> +
>>> /**
>>> * @mmap:
>>> *
>>> @@ -606,6 +638,11 @@ void dma_buf_detach(struct dma_buf *dmabuf,
>>> int dma_buf_pin(struct dma_buf_attachment *attach);
>>> void dma_buf_unpin(struct dma_buf_attachment *attach);
>>>
>>> +int dma_buf_begin_access(struct dma_buf_attachment *attach,
>>> + struct sg_table *sgt, enum
>>> dma_data_direction dir);
>>> +int dma_buf_end_access(struct dma_buf_attachment *attach,
>>> + struct sg_table *sgt, enum
>>> dma_data_direction dir);
>>> +
>>> struct dma_buf *dma_buf_export(const struct dma_buf_export_info
>>> *exp_info);
>>>
>>> int dma_buf_fd(struct dma_buf *dmabuf, int flags);
Powered by blists - more mailing lists