[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240123153421.715951-16-tudor.ambarus@linaro.org>
Date: Tue, 23 Jan 2024 15:34:14 +0000
From: Tudor Ambarus <tudor.ambarus@...aro.org>
To: broonie@...nel.org,
andi.shyti@...nel.org,
arnd@...db.de
Cc: robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
alim.akhtar@...sung.com,
linux-spi@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-arch@...r.kernel.org,
andre.draszik@...aro.org,
peter.griffin@...aro.org,
semen.protsenko@...aro.org,
kernel-team@...roid.com,
willmcvicker@...gle.com,
Tudor Ambarus <tudor.ambarus@...aro.org>
Subject: [PATCH 15/21] spi: s3c64xx: simplify s3c64xx_wait_for_pio()
s3c64xx_spi_transfer_one() makes sure that for PIO the xfer->len is
always smaller than the fifo size. Clean s3c64xx_wait_for_pio() and
emphasize that it works with lengths smaller than the fifo size.
Signed-off-by: Tudor Ambarus <tudor.ambarus@...aro.org>
---
drivers/spi/spi-s3c64xx.c | 75 +++++++++------------------------------
1 file changed, 17 insertions(+), 58 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fd0e62ff8968..f5474f3b3920 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -484,26 +484,6 @@ static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
return 0;
}
-static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
- int timeout_ms)
-{
- void __iomem *regs = sdd->regs;
- unsigned long val = 1;
- u32 status;
- u32 max_fifo = FIFO_DEPTH(sdd);
-
- if (timeout_ms)
- val = msecs_to_loops(timeout_ms);
-
- do {
- status = readl(regs + S3C64XX_SPI_STATUS);
- } while (FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status) < max_fifo &&
- --val);
-
- /* return the actual received data length */
- return FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status);
-}
-
static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer)
{
@@ -547,13 +527,11 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, bool use_irq)
{
void __iomem *regs = sdd->regs;
+ u8 *buf = xfer->rx_buf;
+ unsigned long time_us;
unsigned long val;
- u32 status;
- int loops;
- u32 cpy_len;
- u8 *buf;
+ u32 status, len;
int ms;
- unsigned long time_us;
/* microsecs to xfer 'len' bytes @ 'cur_speed' */
time_us = (xfer->len * 8 * 1000 * 1000) / sdd->cur_speed;
@@ -576,48 +554,29 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
status = readl(regs + S3C64XX_SPI_STATUS);
} while (FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status) < xfer->len &&
--val);
-
if (!val)
return -EIO;
/* If it was only Tx */
- if (!xfer->rx_buf) {
+ if (!buf) {
sdd->state &= ~TXBUSY;
return 0;
}
- /*
- * If the receive length is bigger than the controller fifo
- * size, calculate the loops and read the fifo as many times.
- * loops = length / max fifo size (calculated by using the
- * fifo mask).
- * For any size less than the fifo size the below code is
- * executed atleast once.
- */
- loops = xfer->len / FIFO_DEPTH(sdd);
- buf = xfer->rx_buf;
- do {
- /* wait for data to be received in the fifo */
- cpy_len = s3c64xx_spi_wait_for_timeout(sdd,
- (loops ? ms : 0));
-
- switch (sdd->cur_bpw) {
- case 32:
- ioread32_rep(regs + S3C64XX_SPI_RX_DATA,
- buf, cpy_len / 4);
- break;
- case 16:
- ioread16_rep(regs + S3C64XX_SPI_RX_DATA,
- buf, cpy_len / 2);
- break;
- default:
- ioread8_rep(regs + S3C64XX_SPI_RX_DATA,
- buf, cpy_len);
- break;
- }
+ len = FIELD_GET(S3C64XX_SPI_ST_RX_FIFO_LVL, status);
+
+ switch (sdd->cur_bpw) {
+ case 32:
+ ioread32_rep(regs + S3C64XX_SPI_RX_DATA, buf, len / 4);
+ break;
+ case 16:
+ ioread16_rep(regs + S3C64XX_SPI_RX_DATA, buf, len / 2);
+ break;
+ default:
+ ioread8_rep(regs + S3C64XX_SPI_RX_DATA, buf, len);
+ break;
+ }
- buf = buf + cpy_len;
- } while (loops--);
sdd->state &= ~RXBUSY;
return 0;
--
2.43.0.429.g432eaa2c6b-goog
Powered by blists - more mailing lists