| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240123164241.3689109-4-Frank.Li@nxp.com>
Date: Tue, 23 Jan 2024 11:42:41 -0500
From: Frank Li <Frank.Li@....com>
To: thinh.nguyen@...opsys.com
Cc: Frank.Li@....com,
balbi@...nel.org,
devicetree@...r.kernel.org,
gregkh@...uxfoundation.org,
imx@...ts.linux.dev,
linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org,
mark.rutland@....com,
mathias.nyman@...el.com,
pku.leo@...il.com,
ran.wang_1@....com,
robh+dt@...nel.org,
sergei.shtylyov@...entembedded.com
Subject: [PATCH v3 3/3] usb: dwc3: Add workaround for host mode VBUS glitch when boot
From: Ran Wang <ran.wang_1@....com>
When DWC3 is set to host mode by programming register DWC3_GCTL, VBUS
(or its control signal) will be turned on immediately on related Root Hub
ports. Then, the VBUS is turned off for a little while(15us) when do xhci
reset (conducted by xhci driver) and back to normal finally, we can
observe a negative glitch of related signal happen.
This VBUS glitch might cause some USB devices enumeration fail if kernel
boot with them connected. Such as LS1012AFWRY/LS1043ARDB/LX2160AQDS
/LS1088ARDB with Kingston 16GB USB2.0/Kingston USB3.0/JetFlash Transcend
4GB USB2.0 drives. The fail cases include enumerated as full-speed device
or report wrong device descriptor, etc.
One SW workaround which can fix this is by programing all xhci PORTSC[PP]
to 0 to turn off VBUS immediately after setting host mode in DWC3 driver
(per signal measurement result, it will be too late to do it in
xhci-plat.c or xhci.c). Then, after xhci reset complete in xhci driver,
PORTSC[PP]s' value will back to 1 automatically and VBUS on at that time,
no glitch happen and normal enumeration process has no impact.
Signed-off-by: Ran Wang <ran.wang_1@....com>
Reviewed-by: Peter Chen <peter.chen@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
Notes:
Change from v2 to v3
- reversed christmas tree
- please move major change hunk to the top
- Reword "We have to ..." to "Some platforms need to ... "
Change from v1 to v2:
- split xhci.h
Last review at June 06, 2019. Fixed all review comments and sent again.
https://lore.kernel.org/linux-kernel/AM5PR0402MB2865979E26017BC5937DBBA5F1170@AM5PR0402MB2865.eurprd04.prod.outlook.com/
drivers/usb/dwc3/core.c | 3 +++
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/host.c | 51 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 56 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3e55838c00014..3b68e8e45b8b9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1626,6 +1626,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_split_quirk = device_property_read_bool(dev,
"snps,dis-split-quirk");
+ dwc->host_vbus_glitches_quirk = device_property_read_bool(dev,
+ "snps,host-vbus-glitches-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index e3eea965e57bf..df544ec730d22 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1132,6 +1132,7 @@ struct dwc3_scratchpad_array {
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @host_vbus_glitches_quirk: set to avoid vbus glitch during xhci reset.
* @dis_split_quirk: set to disable split boundary.
* @wakeup_configured: set if the device is configured for remote wakeup.
* @suspended: set to track suspend event due to U3/L2.
@@ -1353,6 +1354,7 @@ struct dwc3 {
unsigned tx_de_emphasis:2;
unsigned dis_metastability_quirk:1;
+ unsigned host_vbus_glitches_quirk:1;
unsigned dis_split_quirk:1;
unsigned async_callbacks:1;
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 61f57fe5bb783..952d73d05dffa 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,8 +11,52 @@
#include <linux/of.h>
#include <linux/platform_device.h>
+#include "../host/xhci-port.h"
+#include "../host/xhci-ext-caps.h"
+#include "../host/xhci-caps.h"
#include "core.h"
+#define XHCI_HCSPARAMS1 0x4
+#define XHCI_PORTSC_BASE 0x400
+
+/*
+ * dwc3_power_off_all_roothub_ports - Power off all Root hub ports
+ * @dwc3: Pointer to our controller context structure
+ */
+static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc)
+{
+ void __iomem *xhci_regs;
+ u32 op_regs_base;
+ int port_num;
+ u32 offset;
+ u32 reg;
+ int i;
+
+ /* xhci regs is not mapped yet, do it temperary here */
+ if (dwc->xhci_resources[0].start) {
+ xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END);
+ if (IS_ERR(xhci_regs)) {
+ dev_err(dwc->dev, "Failed to ioremap xhci_regs\n");
+ return;
+ }
+
+ op_regs_base = HC_LENGTH(readl(xhci_regs));
+ reg = readl(xhci_regs + XHCI_HCSPARAMS1);
+ port_num = HCS_MAX_PORTS(reg);
+
+ for (i = 1; i <= port_num; i++) {
+ offset = op_regs_base + XHCI_PORTSC_BASE + 0x10 * (i - 1);
+ reg = readl(xhci_regs + offset);
+ reg &= ~PORT_POWER;
+ writel(reg, xhci_regs + offset);
+ }
+
+ iounmap(xhci_regs);
+ } else {
+ dev_err(dwc->dev, "xhci base reg invalid\n");
+ }
+}
+
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
int irq, char *name)
{
@@ -66,6 +110,13 @@ int dwc3_host_init(struct dwc3 *dwc)
int ret, irq;
int prop_idx = 0;
+ /*
+ * Some platforms need to power off all Root hub ports immediately after DWC3 set to host
+ * mode to avoid VBUS glitch happen when xhci get reset later.
+ */
+ if (dwc->host_vbus_glitches_quirk)
+ dwc3_power_off_all_roothub_ports(dwc);
+
irq = dwc3_host_get_irq(dwc);
if (irq < 0)
return irq;
--
2.34.1
Powered by blists - more mailing lists