linux-kernel - [PATCH v3] thermal/drivers/sun8i: Don't fail probe due to zone registration failure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240123-thermal-sun8i-registration-v3-1-3e5771b1bbdd@kernel.org>
Date: Tue, 23 Jan 2024 23:33:07 +0000
From: Mark Brown <broonie@...nel.org>
To: Vasily Khoruzhick <anarsoul@...il.com>, 
 Yangtao Li <tiny.windzz@...il.com>, "Rafael J. Wysocki" <rafael@...nel.org>, 
 Daniel Lezcano <daniel.lezcano@...aro.org>, 
 Amit Kucheria <amitk@...nel.org>, Zhang Rui <rui.zhang@...el.com>, 
 Chen-Yu Tsai <wens@...e.org>, Jernej Skrabec <jernej.skrabec@...il.com>, 
 Samuel Holland <samuel@...lland.org>
Cc: Hugh Dickins <hughd@...gle.com>, linux-pm@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev, 
 linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>
Subject: [PATCH v3] thermal/drivers/sun8i: Don't fail probe due to zone
 registration failure

Currently the sun8i thermal driver will fail to probe if any of the
thermal zones it is registering fails to register with the thermal core.
Since we currently do not define any trip points for the GPU thermal
zones on at least A64 or H5 this means that we have no thermal support
on these platforms:

[    1.698703] thermal_sys: Failed to find 'trips' node
[    1.698707] thermal_sys: Failed to find trip points for thermal-sensor id=1

even though the main CPU thermal zone on both SoCs is fully configured.
This does not seem ideal, while we may not be able to use all the zones
it seems better to have those zones which are usable be operational.
Instead just carry on registering zones if we get any non-deferral
error, allowing use of those zones which are usable.

This means that we also need to update the interrupt handler to not
attempt to notify the core for events on zones which we have not
registered, I didn't see an ability to mask individual interrupts and
I would expect that interrupts would still be indicated in the ISR even
if they were masked.

Reviewed-by: Vasily Khoruzhick <anarsoul@...il.com>
Acked-by: Jernej Skrabec <jernej.skrabec@...il.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
Changes in v3:
- Rebase onto v6.8-rc1.
- Link to v2: https://lore.kernel.org/r/20230912-thermal-sun8i-registration-v2-1-077230107768@kernel.org

Changes in v2:
- Rebase onto v6.6-rc1.
- Link to v1: https://lore.kernel.org/r/20230718-thermal-sun8i-registration-v1-1-c95b1b070340@kernel.org
---
 drivers/thermal/sun8i_thermal.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 6a8e386dbc8d..c2a8ae7f8f2f 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -188,6 +188,9 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
 	int i;

 	for_each_set_bit(i, &irq_bitmap, tmdev->chip->sensor_num) {
+		/* We allow some zones to not register. */
+		if (IS_ERR(tmdev->sensor[i].tzd))
+			continue;
 		thermal_zone_device_update(tmdev->sensor[i].tzd,
 					   THERMAL_EVENT_UNSPECIFIED);
 	}
@@ -465,8 +468,17 @@ static int sun8i_ths_register(struct ths_device *tmdev)
 						      i,
 						      &tmdev->sensor[i],
 						      &ths_ops);
-		if (IS_ERR(tmdev->sensor[i].tzd))
-			return PTR_ERR(tmdev->sensor[i].tzd);
+
+		/*
+		 * If an individual zone fails to register for reasons
+		 * other than probe deferral (eg, a bad DT) then carry
+		 * on, other zones might register successfully.
+		 */
+		if (IS_ERR(tmdev->sensor[i].tzd)) {
+			if (PTR_ERR(tmdev->sensor[i].tzd) == -EPROBE_DEFER)
+				return PTR_ERR(tmdev->sensor[i].tzd);
+			continue;
+		}

 		devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd);
 	}

---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20230718-thermal-sun8i-registration-df3a136ccafa

Best regards,
-- 
Mark Brown <broonie@...nel.org>