| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <537266fe-0bf7-4208-a9f3-ae27f462c6ed@phytec.de>
Date: Tue, 23 Jan 2024 07:11:27 +0100
From: Wadim Egorov <w.egorov@...tec.de>
To: Mathieu Othacehe <othacehe@....org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer
<s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, NXP Linux Team <linux-imx@....com>, Li
Yang <leoyang.li@....com>, Primoz Fiser <primoz.fiser@...ik.com>, Stefan
Wahren <wahrenst@....net>, Christoph Stoidner <c.stoidner@...tec.de>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 3/3] arm64: dts: imx93: Add phyBOARD-Segin-i.MX93
support
Hey Mathieu,
Am 22.01.24 um 10:53 schrieb Mathieu Othacehe:
> Add basic support for phyBOARD-Segin-i.MX93.
> Main features are:
> * eMMC
> * Ethernet
> * SD-Card
> * UART
>
> Signed-off-by: Mathieu Othacehe <othacehe@....org>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx93-phyboard-segin.dts | 141 ++++++++++++++++++
> .../boot/dts/freescale/imx93-phycore-som.dtsi | 127 ++++++++++++++++
> 3 files changed, 269 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..65db918c821c 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -201,6 +201,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
> new file mode 100644
> index 000000000000..5433c33d1322
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Wadim Egorov <w.egorov@...tec.de>, Christoph Stoidner <c.stoidner@...tec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@...il.com>
> + *
> + * Product homepage:
> + * phyBOARD-Segin carrier board is reused for the i.MX93 design.
> + * https://www.phytec.de/produkte/single-board-computer/phyboard-segin-imx6ul/
> + */
> +
> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> + model = "PHYTEC phyBOARD-Segin-i.MX93";
> + compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
> + "fsl,imx93";
> +
> + chosen {
> + stdout-path = &lpuart1;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2 {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "VCC_SD";
> + };
> +};
> +
> +/* GPIOs */
> +&gpio1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio1>;
You are doing more than you describing in your changes log.
Here you are forcing a gpio-only functionality for the X16 header. But
the pins we route down to the X16 expansion connector can be also used
differently.
Typically we provide device tree overlays for different use cases on
this expansion connectors.
Please drop the muxing.
Same applies for the gpio names.
> + gpio-line-names = "X_GPIO1_3";
> +};
> +
> +&gpio4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio4>;
> + gpio-line-names = "", "", "", "", "", "", "", "X_GPIO5_9";
Same for gpio4.
> +};
> +
> +/* Console */
> +&lpuart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> + no-1-8-v;
> +};
> +
> +/* SD-Card */
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
> + bus-width = <4>;
> + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
> + no-mmc;
> + no-sdio;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_gpio1: gpio1grp {
> + fsl,pins = <
> + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x10
> + >;
> + };
> +
> + pinctrl_gpio4: gpio4grp {
> + fsl,pins = <
> + MX93_PAD_ENET1_TXC__GPIO4_IO07 0x10
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
> + MX93_PAD_UART1_TXD__LPUART1_TX 0x30e
> + >;
> + };
> +
> + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc2_cd: usdhc2cdgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc2_default: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x178e
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> new file mode 100644
> index 000000000000..439ea4176f8c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Wadim Egorov <w.egorov@...tec.de>, Christoph Stoidner <c.stoidner@...tec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@...il.com>
> + *
> + * Product homepage:
> + * https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
> + */
> +/dts-v1/;
Maybe this comment was lost, but I asked to move the dts-v1 tag into the
carrier board device tree.
Regards,
Wadim
> +
> +#include <dt-bindings/leds/common.h>
> +
> +#include "imx93.dtsi"
> +
> +/{
> + model = "PHYTEC phyCORE-i.MX93";
> + compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> + reserved-memory {
> + ranges;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + alloc-ranges = <0 0x80000000 0 0x40000000>;
> + size = <0 0x10000000>;
> + linux,cma-default;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + led-0 {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_HEARTBEAT;
> + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +/* Ethernet */
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "rmii";
> + phy-handle = <ðphy1>;
> + fsl,magic-packet;
> + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
> + <&clk IMX93_CLK_ENET_REF>,
> + <&clk IMX93_CLK_ENET_REF_PHY>;
> + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
> + assigned-clock-rates = <100000000>, <50000000>, <50000000>;
> + status = "okay";
> +
> + mdio: mdio {
> + clock-frequency = <5000000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
> + };
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +/* Watchdog */
> +&wdog3 {
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_fec: fecgrp {
> + fsl,pins = <
> + MX93_PAD_ENET2_MDC__ENET1_MDC 0x50e
> + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x502
> + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
> + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
> + MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x5fe
> + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
> + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x50e
> + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x50e
> + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x50e
> + MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX93_PAD_SD1_CLK__USDHC1_CLK 0x179e
> + MX93_PAD_SD1_CMD__USDHC1_CMD 0x1386
> + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
> + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x1386
> + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
> + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x1386
> + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x1386
> + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x1386
> + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x1386
> + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x1386
> + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e
> + >;
> + };
> +};
Powered by blists - more mailing lists