lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <143b8da0-ee76-41a2-a26b-e7513e44e784@linaro.org>
Date: Tue, 23 Jan 2024 10:58:12 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Mihai.Sain@...rochip.com, claudiu.beznea@...on.dev, robh+dt@...nel.org,
 krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
 Nicolas.Ferre@...rochip.com, alexandre.belloni@...tlin.com,
 devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/8] ARM: dts: microchip: sam9x60_curiosity: Add
 power-supply properties for sdmmc nodes

On 23/01/2024 10:07, Mihai.Sain@...rochip.com wrote:
> Hi Krzysztof,
> 
> I'm sorry for quoting (email is sent from Outlook).
> The sdmmc controller from SAM9 MPUs doesn't support the IO voltage signaling/switching required by the UHS sd-card.
> On the electrical schematics of the boards the controller and sd-card power pins are connected to 3V3 regulator.
> On the SAMA5 MPUs there is support for IO voltage switching but since we have issues with the tuning procedure required but the UHS cards,
> we want to keep vqmmc at 3V3 in order to use high-speed mode.

OK, it is fine for me.

Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ