| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240117115908.740438007@linutronix.de>
Date: Tue, 23 Jan 2024 13:53:40 +0100 (CET)
From: Thomas Gleixner <tglx@...utronix.de>
To: LKML <linux-kernel@...r.kernel.org>
Cc: x86@...nel.org,
Tom Lendacky <thomas.lendacky@....com>,
Andrew Cooper <andrew.cooper3@...rix.com>,
Arjan van de Ven <arjan@...ux.intel.com>,
Huang Rui <ray.huang@....com>,
Juergen Gross <jgross@...e.com>,
Dimitri Sivanich <dimitri.sivanich@....com>,
Sohil Mehta <sohil.mehta@...el.com>,
K Prateek Nayak <kprateek.nayak@....com>,
Kan Liang <kan.liang@...ux.intel.com>,
Zhang Rui <rui.zhang@...el.com>,
"Paul E. McKenney" <paulmck@...nel.org>,
Feng Tang <feng.tang@...el.com>,
Andy Shevchenko <andy@...radead.org>,
Michael Kelley <mhklinux@...look.com>,
"Peter Zijlstra (Intel)" <peterz@...radead.org>
Subject: [patch v5 07/19] x86/cpu: Use common topology code for Intel
From: Thomas Gleixner <tglx@...utronix.de>
Intel CPUs use either topology leaf 0xb/0x1f evaluation or the legacy
SMP/HT evaluation based on CPUID leaf 0x1/0x4.
Move it over to the consolidated topology code and remove the random
topology hacks which are sprinkled into the Intel and the common code.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
Tested-by: Juergen Gross <jgross@...e.com>
Tested-by: Sohil Mehta <sohil.mehta@...el.com>
Tested-by: Michael Kelley <mhklinux@...look.com>
---
arch/x86/kernel/cpu/common.c | 65 ----------------------------------
arch/x86/kernel/cpu/cpu.h | 4 --
arch/x86/kernel/cpu/intel.c | 25 -------------
arch/x86/kernel/cpu/topology_common.c | 5 ++
4 files changed, 4 insertions(+), 95 deletions(-)
---
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -792,19 +792,6 @@ static void get_model_name(struct cpuinf
*(s + 1) = '\0';
}
-void detect_num_cpu_cores(struct cpuinfo_x86 *c)
-{
- unsigned int eax, ebx, ecx, edx;
-
- c->x86_max_cores = 1;
- if (!IS_ENABLED(CONFIG_SMP) || c->cpuid_level < 4)
- return;
-
- cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
- if (eax & 0x1f)
- c->x86_max_cores = (eax >> 26) + 1;
-}
-
void cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, ebx, ecx, edx, l2size;
@@ -866,54 +853,6 @@ static void cpu_detect_tlb(struct cpuinf
tlb_lld_4m[ENTRIES], tlb_lld_1g[ENTRIES]);
}
-int detect_ht_early(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- u32 eax, ebx, ecx, edx;
-
- if (!cpu_has(c, X86_FEATURE_HT))
- return -1;
-
- if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
- return -1;
-
- if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
- return -1;
-
- cpuid(1, &eax, &ebx, &ecx, &edx);
-
- smp_num_siblings = (ebx & 0xff0000) >> 16;
- if (smp_num_siblings == 1)
- pr_info_once("CPU0: Hyper-Threading is disabled\n");
-#endif
- return 0;
-}
-
-void detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- int index_msb, core_bits;
-
- if (topo_is_converted(c))
- return;
-
- if (detect_ht_early(c) < 0)
- return;
-
- index_msb = get_count_order(smp_num_siblings);
- c->topo.pkg_id = apic->phys_pkg_id(c->topo.initial_apicid, index_msb);
-
- smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
- index_msb = get_count_order(smp_num_siblings);
-
- core_bits = get_count_order(c->x86_max_cores);
-
- c->topo.core_id = apic->phys_pkg_id(c->topo.initial_apicid, index_msb) &
- ((1 << core_bits) - 1);
-#endif
-}
-
static void get_cpu_vendor(struct cpuinfo_x86 *c)
{
char *v = c->x86_vendor_id;
@@ -1898,10 +1837,6 @@ static void identify_cpu(struct cpuinfo_
c->x86, c->x86_model);
}
-#ifdef CONFIG_X86_64
- detect_ht(c);
-#endif
-
x86_init_rdrand(c);
setup_pku(c);
setup_cet(c);
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -76,11 +76,7 @@ extern void init_intel_cacheinfo(struct
extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
extern void init_hygon_cacheinfo(struct cpuinfo_x86 *c);
-extern void detect_num_cpu_cores(struct cpuinfo_x86 *c);
-extern int detect_extended_topology_early(struct cpuinfo_x86 *c);
extern int detect_extended_topology(struct cpuinfo_x86 *c);
-extern int detect_ht_early(struct cpuinfo_x86 *c);
-extern void detect_ht(struct cpuinfo_x86 *c);
extern void check_null_seg_clears_base(struct cpuinfo_x86 *c);
void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c);
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -315,13 +315,6 @@ static void early_init_intel(struct cpui
}
check_memory_type_self_snoop_errata(c);
-
- /*
- * Get the number of SMT siblings early from the extended topology
- * leaf, if available. Otherwise try the legacy SMT detection.
- */
- if (detect_extended_topology_early(c) < 0)
- detect_ht_early(c);
}
static void bsp_init_intel(struct cpuinfo_x86 *c)
@@ -603,24 +596,6 @@ static void init_intel(struct cpuinfo_x8
intel_workarounds(c);
- /*
- * Detect the extended topology information if available. This
- * will reinitialise the initial_apicid which will be used
- * in init_intel_cacheinfo()
- */
- detect_extended_topology(c);
-
- if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
- /*
- * let's use the legacy cpuid vector 0x1 and 0x4 for topology
- * detection.
- */
- detect_num_cpu_cores(c);
-#ifdef CONFIG_X86_32
- detect_ht(c);
-#endif
- }
-
init_intel_cacheinfo(c);
if (c->cpuid_level > 9) {
--- a/arch/x86/kernel/cpu/topology_common.c
+++ b/arch/x86/kernel/cpu/topology_common.c
@@ -71,7 +71,6 @@ bool topo_is_converted(struct cpuinfo_x8
/* Temporary until everything is converted over. */
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
- case X86_VENDOR_INTEL:
case X86_VENDOR_HYGON:
return false;
default:
@@ -136,6 +135,10 @@ static void parse_topology(struct topo_s
case X86_VENDOR_ZHAOXIN:
parse_legacy(tscan);
break;
+ case X86_VENDOR_INTEL:
+ if (!IS_ENABLED(CONFIG_CPU_SUP_INTEL) || !cpu_parse_topology_ext(tscan))
+ parse_legacy(tscan);
+ break;
}
}
Powered by blists - more mailing lists