linux-kernel - [PATCH 09/11] arm64: dts: ti: k3-j7200: Make the FSS node a simple-bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240124184722.150615-9-afd@ti.com>
Date: Wed, 24 Jan 2024 12:47:20 -0600
From: Andrew Davis <afd@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Tero
 Kristo <kristo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Krzysztof
 Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley
	<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Andrew Davis <afd@...com>
Subject: [PATCH 09/11] arm64: dts: ti: k3-j7200: Make the FSS node a simple-bus

To do this we convert hbmc-mux to "reg-mux", then the FSS node
does not need to be a syscon, so change to "simple-bus". This
removes a DTS check warning.

Signed-off-by: Andrew Davis <afd@...com>
---
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 60b26374ae0cc..d501bd5f02248 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -518,17 +518,18 @@ mcu_spi2: spi@...20000 {
 		status = "disabled";
 	};
 
-	fss: syscon@...00000 {
-		compatible = "syscon", "simple-mfd";
+	fss: bus@...00000 {
+		compatible = "simple-bus";
 		reg = <0x00 0x47000000 0x00 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		hbmc_mux: hbmc-mux {
-			compatible = "mmio-mux";
+		hbmc_mux: mux-controller@...00004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+			mux-reg-masks = <0x0 0x2>; /* HBMC select */
 		};
 
 		hbmc: hyperbus@...34000 {
-- 
2.39.2