| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240125-ktd2801-v5-0-e22da232a825@skole.hr>
Date: Thu, 25 Jan 2024 16:30:52 +0100
From: Duje Mihanović <duje.mihanovic@...le.hr>
To: Lee Jones <lee@...nel.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>, Pavel Machek <pavel@....cz>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Helge Deller <deller@....de>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Karel Balej <balejk@...fyz.cz>, ~postmarketos/upstreaming@...ts.sr.ht,
phone-devel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
Duje Mihanović <duje.mihanovic@...le.hr>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v5 0/4] Kinetic ExpressWire library and KTD2801 backlight
driver
Hello,
This series adds support for the Kinetic KTD2801 LED backlight driver
IC found in samsung,coreprimevelte.
Support is already upstream for the somewhat similar KTD2692 flash
driver, and this series since v3 also moves its ExpressWire code into a
separate library and converts the KTD2692 driver to use that library.
Signed-off-by: Duje Mihanović <duje.mihanovic@...le.hr>
---
Changes in v5:
- Split up ExpressWire library and KTD2692 conversion
- Rebase on v6.8-rc1
- Link to v4: https://lore.kernel.org/r/20240122-ktd2801-v4-0-33c986a3eb68@skole.hr
Changes in v4:
- Drop 'extern' keywords in leds-expresswire.h
- Add 'expresswire_write_u8' to leds-expresswire.c and use it in the two
drivers
- Move GPIOLIB dependency to LEDS_EXPRESSWIRE instead of letting clients
handle it
- Drop time constant macros
- Drop delay.h include in ktd2692
- Drop bits.h and delay.h includes in ktd2801
- Link to v3: https://lore.kernel.org/r/20240120-ktd2801-v3-0-fe2cbafffb21@skole.hr
Changes in v3:
- Split ExpressWire code into library (and convert KTD2692 to use this
library)
- Rewrite commit messages
- Add link to datasheet
- Drop of.h include in ktd2801
- Use _cansleep and usleep_range when powering off
- Clean up bitwise operation in update_status
- Link to v2: https://lore.kernel.org/r/20240118-ktd2801-v2-0-425cf32e0769@skole.hr
Changes in v2:
- Address maintainer comments:
- Drop MODULE_ALIAS
- Rename enable-gpios to ctrl-gpios
- Rename ktd2801_backlight->desc to ktd2801_backlight->gpiod
- Give time constants more descriptive names and note their origins in
Samsung driver
- Convert to GPIO_ACTIVE_HIGH
- Update trailers
- Link to v1: https://lore.kernel.org/r/20231005-ktd2801-v1-0-43cd85b0629a@skole.hr
---
Duje Mihanović (4):
leds: introduce ExpressWire library
leds: ktd2692: convert to use ExpressWire library
dt-bindings: backlight: add Kinetic KTD2801 binding
backlight: Add Kinetic KTD2801 backlight support
.../bindings/leds/backlight/kinetic,ktd2801.yaml | 46 ++++++++
MAINTAINERS | 13 +++
drivers/leds/Kconfig | 4 +
drivers/leds/Makefile | 3 +
drivers/leds/flash/Kconfig | 2 +-
drivers/leds/flash/leds-ktd2692.c | 116 +++++--------------
drivers/leds/leds-expresswire.c | 68 +++++++++++
drivers/video/backlight/Kconfig | 7 ++
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/ktd2801-backlight.c | 128 +++++++++++++++++++++
include/linux/leds-expresswire.h | 36 ++++++
11 files changed, 334 insertions(+), 90 deletions(-)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20231004-ktd2801-0f3883cb59d0
Best regards,
--
Duje Mihanović <duje.mihanovic@...le.hr>
Powered by blists - more mailing lists