[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240125163145.87055-1-afd@ti.com>
Date: Thu, 25 Jan 2024 10:31:45 -0600
From: Andrew Davis <afd@...com>
To: Russell King <linux@...linux.org.uk>, Arnd Bergmann <arnd@...db.de>,
Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Santosh
Shilimkar <ssantosh@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
Andrew Davis <afd@...com>
Subject: [PATCH v2] ARM: multi_v7_defconfig: Add more TI Keystone support
The Keystone platforms used their own keystone_defconfig mostly to
enable CONFIG_ARM_LPAE which could not be added to the multi_v7 config.
Now that we have multi_v7_lpae_defconfig/lpae.config target we can and
should use that defconfig for Keystone. Add the remaining must-have
options for Keystone support to multi_v7_defconfig.
TI_SCI_*:
TI_MESSAGE_MANAGER:
Allows TI-SCI communication with system control firmware (PMMC) on K2G.
TI_KEYSTONE_NETCP*:
KEYSTONE_NAVIGATOR*:
Network driver, needed for NFS boot.
PCI_KEYSTONE*:
CAN_C_CAN*:
INPUT_GPIO_DECODER:
SPI_CADENCE_QUADSPI:
PWM_TIECAP:
Miscellaneous on-chip peripherals. Added as modules where possible.
RESET_TI*:
Used by DSP Remoteproc driver.
bloat-o-meter:
add/remove: 387/0 grow/shrink: 6/0 up/down: 130945/0 (130945)
Total: Before=22791863, After=22922808, chg +0.57%
Signed-off-by: Andrew Davis <afd@...com>
---
Changes for v2:
- Added some info on why each of these configs were added
- Added bloat-o-meter output
arch/arm/configs/multi_v7_defconfig | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ecb3e286107a4..04ba674e03f60 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -183,6 +183,7 @@ CONFIG_PCIE_RCAR_HOST=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_KEYSTONE_HOST=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
@@ -191,6 +192,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_TI_SCI_PROTOCOL=y
CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
@@ -280,6 +282,8 @@ CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_TI_CPSW=y
CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
+CONFIG_TI_KEYSTONE_NETCP=y
+CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
CONFIG_XILINX_EMACLITE=y
CONFIG_SFP=m
CONFIG_BROADCOM_PHY=y
@@ -292,6 +296,8 @@ CONFIG_CAN_AT91=m
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_SUN4I=y
CONFIG_CAN_XILINXCAN=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_MCP251X=y
CONFIG_MDIO_MSCC_MIIM=m
@@ -335,6 +341,7 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8997_HAPTIC=m
+CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_CPCAP_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_DA9063_ONKEY=m
@@ -436,6 +443,7 @@ CONFIG_SPI_ATMEL_QUADSPI=m
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
CONFIG_SPI_CADENCE=y
+CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_SPI_GXP=m
@@ -1073,6 +1081,7 @@ CONFIG_HWSPINLOCK_OMAP=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_OMAP2PLUS_MBOX=y
CONFIG_BCM2835_MBOX=y
+CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_QCOM_APCS_IPC=y
CONFIG_STM32_IPCC=m
CONFIG_QCOM_IPCC=y
@@ -1133,11 +1142,15 @@ CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_SOC_TI=y
+CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
+CONFIG_KEYSTONE_NAVIGATOR_DMA=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_CPR=y
CONFIG_QCOM_RPMHPD=y
CONFIG_QCOM_RPMPD=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
CONFIG_ARM_TEGRA_DEVFREQ=m
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
@@ -1193,10 +1206,13 @@ CONFIG_PWM_STM32=m
CONFIG_PWM_STM32_LP=m
CONFIG_PWM_SUN4I=y
CONFIG_PWM_TEGRA=y
+CONFIG_PWM_TIECAP=m
CONFIG_PWM_VT8500=y
CONFIG_KEYSTONE_IRQ=y
CONFIG_RESET_MCHP_SPARX5=y
CONFIG_RESET_SCMI=y
+CONFIG_RESET_TI_SCI=m
+CONFIG_RESET_TI_SYSCON=m
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_BRCM_USB=m
--
2.39.2
Powered by blists - more mailing lists